Nutty Buddy Flex Athletic Cup ایتھلیٹک حفاظتی کپ by Dosun Shin and Mark Littell

Nutty Buddy Flex Athletic Cup ایتھلیٹک حفاظتی کپ by Dosun Shin and Mark Littell is a highly esteemed winner of the very prestigious 2017 A' Design Award آہنی انعام in حفاظتی لباس اور ذاتی حفاظتی سازوسامان ڈیزائن Competition Category.

لوہاحفاظتی سازوسامان· 2017

Nutty Buddy Flex Athletic Cup ایتھلیٹک حفاظتی کپ

by Dosun Shin and Mark Littell

Client: Battle Sports Science

A' Design Award آہنی انعام Winner in حفاظتی سازوسامان Category

26,627

Verified Award Winner

Verify Award Status for #55726

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About Nutty Buddy Flex Athletic Cup ایتھلیٹک حفاظتی کپ

ناٹی بڈی فلیکس مرد کھلاڑیوں کے لیے ایک ایتھلیٹک حفاظتی کپ ہے۔ یہ کپ جسمانی ساخت کے مطابق ڈیزائن کیا گیا ہے اور انجیکشن مولڈنگ کے ذریعے تیار کیا جاتا ہے، جس میں پولی کاربونیٹ شیل اور تھرمو پلاسٹک ایلاسٹومر اوورمولڈ شامل ہے۔ نرم ایلاسٹومر کنارہ اطراف کے حصوں تک پھیلا ہوا ہے، جس کی وجہ سے جلد کے ساتھ رابطہ نرم ہو جاتا ہے اور فعال جسمانی حرکت کے دوران زیادہ آرام دہ فٹنگ فراہم ہوتی ہے۔ تصادم کی قوتیں جذب ہو کر شرمگاہی ہڈی اور نرم بافتوں پر زیادہ یکساں طور پر تقسیم ہو جاتی ہیں۔ یہ تین سائزوں میں دستیاب ہے اور موجودہ اسپورٹس پینٹس اور جاک اسٹریپس میں فٹ ہو جاتا ہے۔

The Recognition

About the A' Design Award آہنی انعام

Nutty Buddy Flex Athletic Cup ایتھلیٹک حفاظتی کپ A' Design Award آہنی انعام کا فاتح ہے، جو ان اچھے ڈیزائنز کو دیا جانے والا باوقار اعتراف ہے جو اچھی طرح ڈیزائن کی گئی تخلیقات سے متوقع پیشہ ورانہ اور صنعتی تقاضوں کو پورا کرتے ہیں۔ آہنی انعام کے فاتحین اپنے تخلیق کاروں کی عظیم مہارت، اعلیٰ تخصص، ماہرانہ فہم اور تخلیقی صلاحیت کو ظاہر کرتے ہیں۔ Nutty Buddy Flex Athletic Cup ایتھلیٹک حفاظتی کپ سے توقع کی جاتی ہے کہ وہ ایک نہایت قدر کی جانے والی، سراہی جانے والی اور عزیز تخلیق ہوگا جو عملی اور جدید ہے۔ A' Design Award آہنی انعام جیتنے والا یہ ڈیزائن صنعت کے بہترین طریقوں کو یکجا کرتا ہے اور مہارت اور ہنر سے جڑی ہوئی قابل تکنیکی خصوصیات رکھتا ہے۔ Nutty Buddy Flex Athletic Cup ایتھلیٹک حفاظتی کپ اپنی باریک بینی کی وجہ سے قابل احترام ہے اور معیار زندگی کی ایسی بہتری فراہم کرنے کے لیے ڈیزائن کیا گیا ہے جو دنیا کو ایک بہتر جگہ بنانے میں مدد دیتی ہے۔

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: The Nutty Buddy Flex is a redesign of the original, anatomically-shaped athletic cup design. The original polycarbonate cup had a thin co-molded soft polymer perimeter edge to cushion the contact between the cup and the skin. The new Flex cup increases the content of the soft polymer edge to include the side areas on the cup, permitting a more comfortable fit during dynamic body movements. This Flex cup redesign absorbs and more evenly distributes impact forces to the pubic bone and soft tissues
Dimensions & Packaging: The cup comes with 3 different sizes.
Hog (small): 6.8x4x2.2 inch, Trophy (medium): 7x4.1x2.4inch, Mongo (large): 7.2x4.3x2.5inch
Tags: Nutty Buddy, Anatomical Cup, Killer Whale Cup
Production Technology: This cup was made by PC injection mold with TPE overmold.
Polycarbonate (Sabic 124R-701) for the cup and Thermoplastic Elastomer (GLS 1040X-1) overmolding for the flex side. OM 1040X-1 is a medical compliant overmolding TPE with very good adhesion to PC or ABS-based plastics.
Design Challenge: After 5 years of use, feedback and surveys, we knew which areas needed improvement. Taking those areas – 1) added comfort 2) more flex 3) increased ventilation 4) greater security of location – and turning them into CAD design was one of the most challenging tasks. At the same time, we needed to maintain structural integrity and superior protection.

In addition, collecting human body data and defining different sizes of cup were a challenge. The head and tale part rubber were pilled off from the cup body after several months of use. The designer added some contacts and punched holes on the over molding part, so the inner and outer rubber were connected together. The tale part was broken by the high impact of water surface from a water ski jumper. The designer added 3 ribs inside of the tale part, and also added circle rings in the center of cup to increase the durability.
Research: The difficult nature of observational research to get the measurements required the development of multiple sized vacuumed formed shells that were used to obtain user size and comfort feedback. Then, the designer collected and organized the human body data from the shell selections based on Large, Medium, and Small. Next, different sizes of prototype models were 3D-printed and tested by users. Again, feedback received from professional baseball players allowed the designer to modify the final shapes and sizes for each cup category.
Inspiration: The redesigned Flex cup continues to follow the anatomically-correct shape of the human male’s anatomy using the design principle of Form Follows Function. The original Nutty Buddy design has been on the market for seven years. Inventor and pitching coach Mark Littell has received feedback from players about possible revisions to the original cup. The Flex redesign is in response to the users’ comments and feedback and to give athletes increased range of motion and added comfort.
Project Duration: The redesign process started in July of 2014 and finished in February of 2015 in Arizona. After the design work, it took 8 months from the start of manufacturing to reach the market.
Operation Flow: The Flex cup high impact resistant polycarbonate material protects the male wearer’s genitals from external impact forces. The soft rubber wing provides cushioning comfort and absorbs any impacts. This cup can be easily installed into existing sport pants and jock straps.
Patents: Patented. Patent No: US 7,004,921. Mark Littell. 2006 & US 7,670,309. Mark Littell. 2010
Team Members: Designer: Professor, Dosun Shin
Designer: Former MLB Player and Pitching Coach, Mark Littell
Image Credits: Professor Dosun Shin, 2017