Joey van Beek tomonidan Steel U Bar Stoli

Joey van Beek tomonidan yaratilgan Steel U Bar Stoli — Tasviriy San'at va San'at Installatsiyasi Dizayni tanlov toifasida nufuzli 2022 A' Design Award Temir Mukofoti mukofotining yuqori baholangan g'olibidir.

TemirTasviriy San'at· 2022

Steel U Bar Stoli

muallif: Joey van Beek

Mijoz: Industrial Office

Tasviriy San'at toifasida A' Design Award Temir Mukofoti g'olibi

20,332

Tasdiqlangan mukofot g'olibi

#137000 uchun mukofot holatini tasdiqlash

A' Design Award saytida ko'rish Press-reliz Mukofot nishoni

Ranglar

Dizayn

Steel U Bar Stoli haqida

Steel U, o'tmishga asoslangan dizayn, hozirgi vaqtda yaratilgan va kelajakni ilhomlantirish niyatida yaratilgan. Bu jismoniy his-tuyg'ular bilan vayron qilingan beton oyoqlari bilan qo'llab-quvvatlanadigan qayta ishlatilgan po'lat stolning kombinatsiyasiga olib keldi. Shunday qilib, dizayn tom ma'noda betonni buzadigan odamning bir qismiga aylanadi. Kombinatsiya jarayon davomida jismoniy va ruhiy qiyinchiliklarni keltirib chiqardi, lekin oxir-oqibat bajarilgan dizaynga olib keldi.

Tan olinish

A' Design Award Temir Mukofoti haqida

Steel U Bar Stoli A' Design Award Temir Mukofotining g‘olibi bo‘lib, bu yaxshi loyihalangan ijodlardan kutiladigan kasbiy va sanoat talablariga javob beradigan yaxshi dizaynlarga beriladigan nufuzli e’tirofdir. Temir g‘oliblari o‘z yaratuvchilarining katta mahorati, yuksak ixtisosligi, mutaxassis tushunchasi va ijodiy salohiyatini namoyon etadi. Steel U Bar Stoli yuqori qadrlanadigan, hayrat bilan qaraladigan va suyukli, amaliy hamda innovatsion ijod bo‘lishi kutiladi. A' Design Award Temir Mukofotini qo‘lga kiritgan ushbu dizayn soha eng yaxshi amaliyotlarini uyg‘unlashtiradi va bilim hamda iste’dod bilan bog‘langan layoqatli texnik xususiyatlarga ega. Steel U Bar Stoli puxtaligi uchun hurmatga sazovor bo‘lib, dunyoni yaxshiroq joyga aylantirishga yordam beradigan hayot sifatini yaxshilashni taqdim etish uchun loyihalangan.

Dizayn ortida

Press-kit

Dizayner tomonidan taqdim etilgan kreditlar, jamoa a'zolari va texnik tafsilotlar.

Noyob xususiyatlar: Steel U, is a combination of reusing emotion and scrap metal. The tabletop is made from 70mm solid reused steel which is supported by two concrete blocks. These are connected by reinforcement steel which is made into shape by forging. The shape of the block is made by the person who owns the table. The way this is done; is by pouring first a smooth concrete block in a mold, which then will destroyed by the owner with a sledgehammer and jack hammer.
O'lchamlar va qadoqlash: Width 3220mm x Depth 650mm x Height 1120mm. Weight 988kg. Tabletop is S355 steel displayed under 10mm hardened glass. Legs are regular concrete with an inner steel shell to create an air chamber for reducing weight. Connection rods are reinforcement steel.
Teglar: Steel U, Thoughts, Emotion, Steel, Concrete, Forged, Industrial Office
Ishlab chiqarish texnologiyasi: The tabletop is made from 70mm S355 steel which was used for producing machine parts. The shapes are made by the oxygen cutting process and when no more parts could come from the plate, it became scrap metal. This was outside, which gave after 2 years in the rain and sun the current look. The reinforcement steel rods where then first forged in an arch and then welded to the tabletop. After making a steel mold, the reinforcement steel was place in the mold and then covered in regular concrete.
Dizayn muammosi: The hardest part was to make the concrete legs, which had to look like demolition but had to show the emotion of the owner. So I called help from my best friend, who is my father, because he had built his own house. I explained the look and strength that I wanted to have and he knew right away what was needed and how to execute. This way he thought and showed me what I needed to know so I could make the second leg myself with him as my mentor by my side checking.
Tadqiqot: The first research I did, was to check if I could find on the internet a furniture design that ,was or looked like it, came from a demolition. After not finding it, I started with the question on how to make the process an experience. My mind went from concrete, to create, to sculpting, to sculpture, to how to sculpt, to thoughts, to experiencing and then to emotion. This resulted in the method of the owner using emotions physically to destroying the legs first to then create.
Ilhom: At the company which I have with my father to build conveyors, I wanted to create an office that was not about functionality, but about productivity. Inspired by my love for industrial designs I noticed the tabletop between the scrap metal, and wanted to use it because that is what you see when standing behind it. The legs got inspiration from demolition. But I wanted to put literally my emotions in to the concrete base, so I came up with the concept of pouring it first and then destroying it.
Loyiha muddati: The idea started on July 2020 in Ede, The Netherlands at my home. But because the tabletop did not yet have the right appearance I needed to wait. When it did have the appearance, it was January 2022. The legs were then made and finished on 13 February 2022 in Ede, The Netherlands at my workshop.
Ish jarayoni: The tabletop is made from scrap metal, so this way it cannot be replicated because steel and the way it is handled during production is never the same. Then the reinforcement steel to support it is there to make it look as if the concrete legs came out of a demolition. The concrete shape is not just for the demolition look, but also to make the table show the emotion of the owner. The owner will have thoughts when destroying the legs and those thought at that moment will be visible to them.