Sprout Velosiped by JunXiang Cheng and Yi Yang

Sprout Velosiped by JunXiang Cheng and Yi Yang is a highly esteemed winner of the very prestigious 2022 A' Design Award Temir Mukofoti in 3D Bosma Shakllar va Mahsulotlar Dizayni Competition Category.

Temir3D Bosma· 2022

Sprout Velosiped

by JunXiang Cheng and Yi Yang

Client: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

A' Design Award Temir Mukofoti Winner in 3D Bosma Category

31,470

Verified Award Winner

Verify Award Status for #137286

View at A' Design Award Press Release Award Badge

Colors

The Design

About Sprout Velosiped

Sprout — uch o'lchamli bosib chiqarish orqali ishlab chiqarilgan velosiped. Ramaning shakli topologik optimallashtirish orqali hosil qilingan bo'lib, bu usul materialni faqat kerakli joylarga joylashtiradi va umumiy sarfni kamaytiradi. Chekli elementlar usuli yordamida o'tkazilgan statik kuchlanish tahlili rama strukturasining barqarorligini tasdiqlaydi. Yakuniy model yuqori zichlikdagi naylondan bosib chiqarilgan. Velosipedning uzunligi 1630 mm, eni 600 mm va balandligi 832 mm ni tashkil etadi. Bosib chiqarish qimmatbaho qoliplarga bo'lgan ehtiyojni bartaraf etadi, shu sababli har bir rama individual dizaynga ega bo'lishi mumkin.

The Recognition

About the A' Design Award Temir Mukofoti

Sprout Velosiped A' Design Award Temir Mukofotining g‘olibi bo‘lib, bu yaxshi loyihalangan ijodlardan kutiladigan kasbiy va sanoat talablariga javob beradigan yaxshi dizaynlarga beriladigan nufuzli e’tirofdir. Temir g‘oliblari o‘z yaratuvchilarining katta mahorati, yuksak ixtisosligi, mutaxassis tushunchasi va ijodiy salohiyatini namoyon etadi. Sprout Velosiped yuqori qadrlanadigan, hayrat bilan qaraladigan va suyukli, amaliy hamda innovatsion ijod bo‘lishi kutiladi. A' Design Award Temir Mukofotini qo‘lga kiritgan ushbu dizayn soha eng yaxshi amaliyotlarini uyg‘unlashtiradi va bilim hamda iste’dod bilan bog‘langan layoqatli texnik xususiyatlarga ega. Sprout Velosiped puxtaligi uchun hurmatga sazovor bo‘lib, dunyoni yaxshiroq joyga aylantirishga yordam beradigan hayot sifatini yaxshilashni taqdim etish uchun loyihalangan.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Dimensions & Packaging: Length 1630mm, width600mm, height 832mm
Tags: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Production Technology: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Design Challenge: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Research: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Inspiration: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Project Duration: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Operation Flow: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Team Members: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao