Masoud Akbarzadeh tomonidan yaratilgan Saltatur Stol — Mebel Dizayni tanlov toifasida nufuzli 2020 A' Design Award Kumush Mukofoti mukofotining yuqori baholangan g'olibidir.
KumushMebel· 2020
Saltatur Stol
muallif: Masoud Akbarzadeh
Mijoz: Polyhedral Structure Laboratory
Mebel toifasida A' Design Award Kumush Mukofoti g'olibi
Tasdiqlangan mukofot g'olibi
#99680 uchun mukofot holatini tasdiqlashDizayn
Saltatur Stol haqida
Saltatur — bu yig'ma kompozit konstruksiya sifatida ishlab chiqilgan uzun oraliqli stol. Ushbu stol faqat siqilishga ishlaydigan beton tanani, keyingi tarangligi oshirilgan po'lat sterjenlarni va o'ta yupqa shisha ustki qismini birlashtiradi. Shisha ustki qism 3,75 metr oraliqni qamrab oluvchi funikulyar uch sharnirli arka shaklida ishlangan. Konstruksiya shakli uch o'lchamli grafik statika yordamida ishlab chiqilgan, shu bois beton tana yuqori va pastki qismidagi taranglik bog'lamlari orqali siqilish holatida saqlanadi. Diskret fazoviy tizim betonning hajmini va uglerod izini kamaytiradi, ayni paytda konstruksiya samaradorligi uchun zarur bo'lgan massani saqlab qoladi.
Tan olinish
A' Design Award Kumush Mukofoti haqida
Saltatur Stol A' Design Award Kumush Mukofotining g‘olibi bo‘lib, bu go‘zal, ulug‘vor va ta’sirchan eng yuqori darajadagi dizaynlarga beriladigan favqulodda nufuzli e’tirofdir. Kumush g‘oliblari o‘z dizaynerlarining ajoyib mahorati, iste’dodi va o‘tkirligini ko‘rsatuvchi juda yorqin va o‘ta ijodiy asarlardir. Saltatur Stol ajoyib, namunaviy, diqqatga sazovor darajada kasbiy va chuqur innovatsion asar bo‘lishi kutiladi. A' Design Award Kumush Mukofotini qo‘lga kiritgan ushbu dizayn san’at, fan, dizayn va texnologiya chegaralarini kengaytiruvchi juda e’tiborga loyiq, tahsinga sazovor ixtirodir. Saltatur Stol ko‘pchilik havas qiladigan, istaklarni uyg‘otadigan, ijobiy tuyg‘ular olib keladigan hamda hayrat va ajablanish uyg‘otadigan ijoddir.
Dizayn ortida
Press-kit
Dizayner tomonidan taqdim etilgan kreditlar, jamoa a'zolari va texnik tafsilotlar.
- Noyob xususiyatlar
- The Saltatur demonstrates innovative research in the design and fabrication of a prefab, discrete, spatial composite structure consisting of a spatial, compression-only concrete body, post-tensioning steel rods, and an ultra-thin glass structure on its top in the form of long-span furniture. Using discrete spatial systems would minimize the volume of concrete and the carbon footprint while preserving the necessary mass for structural performance and specific architectural detailing.
- O'lchamlar va qadoqlash
- 195 cm (W) x 308 cm (L) x 90 cm (H)
- Teglar
- composite, ultra thin spatial concrete, design for reassembly, funicular structures
- Ishlab chiqarish texnologiyasi
- There are multiple design innovations in various phases of the realization of this project, from conceptual structural design to fabrication. The structural form of the project was developed using 3D/polyhedral graphic statics with a very particular control over the magnitude of the horizontal forces in the system. As a result, the entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports.
- Dizayn muammosi
- Challenges include the concrete casting of complex 3d nodes, detail development that can allow for easy assembly and disassembly, ultra thin (4mm) glass top spanning 3 meters to support the applied loads and its self-weight.
- Tadqiqot
- The structural form of the furniture was designed using a newly developed method of 3D Graphic Statics, which is the extension of the existing 2D methods proposed in 1864. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allowed fixing the members in their exact locations in the structure to avoid the possible spatial collision of the branches of the nodes during the assembly. The ultra-thin glass structure on the top was formed into a funicular geometry as a three-hinged discrete arch spanning 3.75 meters.
- Ilhom
- The project has been inspired by the works of Gaudi and extends his works to a three-dimensional compression and tension combined system of forces in the form of a long span table. The structural form has been inspired by the Greco-Roman wrestling technique, Salto, which includes lifting, returning, and taking down an opponent to the mat. The geometry of the table lifts the glass top, rotates, and transfers the loads to the ground. The word 'salto' means 'to dance' in Latin. The name of our structure is Saltatur, which means 'a dancer' in Latin.
- Loyiha muddati
- 2 years, Weitzman School of Design, University of Pennsylvania
- Ish jarayoni
- The Saltator is an ensemble of compression and tension forces held in a twisted configuration of equilibrium. The geometry of the structure was inspired by the Greco-Roman wrestling technique, Salto. The word 'salto' means 'to dance' in Latin, which also inspired the name of the furniture, Saltatur, 'a dancer' in Latin. The form was designed using the geometry-based method of 3D graphic statics. The structure shows how we can minimize the volume of construction materials and reduce the carbon footprint of a structure while preserving the necessary mass for structural performance.
- Patentlar
- N/A
- Jamoa a'zolari
- Masoud Akbarzadeh, Ali Tabatabaei Ghomi, Mohammad Bolhassani, Mostafa Akbari, Alireza Seyedahmadian, Konstantinos Papalexiou, Jingchu Sun, Hanqing Yao.
- Rasm mualliflari
- Copyright: Polyhedral Structures Laboratory
Image credit: Polyhedral Structures Laboratory
Homiylik
Designers.org dan tashqarini kashf eting
Reklama hamkorlarimizdan mahsulotlar, xizmatlar va imkoniyatlarni kashf eting.
Ko'proq kashf eting
Tegishli dizaynlar
Xuddi shu toifadan mukofotga sazovor bo'lgan boshqa dizaynlarni ko'ring, sifat bo'yicha tanlangan.
