Vista EY2T Ikhamera ye-Biometric enombane ejolise ngokwayo ngu-Chris Dopp & Travis Baldwin

Uyilo olubizwa ngokuba yi-Vista EY2T Ikhamera ye-Biometric enombane ejolise ngokwayo olwenziwe ngu-Chris Dopp & Travis Baldwin ngumwini obekekileyo webhaso elinobukhazikhazi le-2015 Ibhaso Lesilivere le-A' Design Award Kudidi Lokhuphiswano lwe-Uyilo lweeMveliso zoKhuseleko, uKhuseleko kunye nokuGada.

IsilivereIimveliso zoKhuseleko· 2015

Vista EY2T Ikhamera ye-Biometric enombane ejolise ngokwayo

ngu Chris Dopp & Travis Baldwin

Umxhasi: Vista Imaging and Crea Inc Design LTD

Umwini we-Ibhaso Lesilivere le-A' Design Award Kudidi Lwe-Iimveliso zoKhuseleko

25,424

Umwini Webhaso Oqinisekisiweyo

Qinisekisa Isimo Sebhaso se-#40052

Tyelela iSayithi Jonga kwi-A' Design Award Uxwebhu Lweendaba Ibheji Yembasa

Imibala

Uyilo

Malunga ne-Vista EY2T Ikhamera ye-Biometric enombane ejolise ngokwayo

Vista EY2T yikhamera ye-biometric enombane ejolise ngokwayo, esetyenziselwa ukuqonda i-iris nobuso. Isixhobo sikhangela indawo ekujoliswe kuyo ukukhangela ubuso, emva koko iinjini ziyajikeleza ikhamera ukuze ijolise emehlweni. Ukusasazeka okubanzi kwee-infrared LED kunye nenkqubo ye-autofocus zivumela ukubanjwa kwemifanekiso kumgama ophakathi kweefithi ezi-3 ukuya kwezi-6, ngoko ke akufuneki ukujolisa ngesandla. Iisensa ezisithoba zangaphambili zimanyene ngasemva kobuso obunye obumnyama, kwaye ubume obujikelezileyo obunjenge-pill olunemiphetho engqukuva budala ukumila okuzolileyo nokungasoyikisiyo. Ikhamera inokusetyenziswa yodwa okanye ifakwe eludongeni.

Ukuqatshelwa

Malunga ne-Ibhaso Lesilivere le-A' Design Award

Vista EY2T Ikhamera ye-Biometric enombane ejolise ngokwayo ngumphumeleli weIbhaso Lesilivere le-A' Design Award, ukuqatshelwa okuhlonitshwayo ngokungaqhelekanga okunikwa imiyilo yomgangatho ophezulu, entle nechukumisayo. Abaphumeleleyo beSilivere ziimveliso ezikhazimlayo kakhulu nezidala kakhulu ezibonisa ubungcali obuphawulekayo, italente nobukrelekrele babayili bazo. Vista EY2T Ikhamera ye-Biometric enombane ejolise ngokwayo iyathenjwa ukuba ibe ngumsebenzi omhle womzekelo, onobungcali obuphawulekayo nezinto ezintsha ezinzulu. Lo myilo uphumeleleyo weIbhaso Lesilivere le-A' Design Award yimveliso ebonakalayo kakhulu, ethandwayo enceda kwaye inyusa imida yobugcisa, inzululwazi, uyilo kunye nobuchwephesha. Vista EY2T Ikhamera ye-Biometric enombane ejolise ngokwayo yimveliso enomona omkhulu kuyo evusa iinqwenelo, izisa iimvakalelo ezintle kwaye ivuselela ukumangaliswa nokumangala.

Emva Koyilo

Ikhithi Yeendaba

Iziqinisekiso, amalungu eqela kunye neenkcukacha zobugcisa ezinikezelwe ngumyili.

Iimpawu Ezizodwa: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Imilinganiselo nePakishini: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Iithegi: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Ubuchwepheshe Bokuvelisa: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Umngeni Woyilo: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Uphando: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Inkuthazo: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Ubude Beprojekthi: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Ukuhamba Komsebenzi: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Amalungu Eqela: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Amagunya Emifanekiso: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015