Aspen Orí Tripod láti ọwọ́ Colorado Tripod Company

Aspen Orí Tripod láti ọwọ́ Colorado Tripod Company jẹ́ aṣẹ́gun olókìkí púpọ̀ ti 2021 Àmì-ẹ̀yẹ Fàdákà A' Design Award nínú Ẹ̀ka Ìdíje Àpẹẹrẹ Kámẹ́rà àti Ohun-èlò Fọ́tò Yíya.

FàdákàOhun-èlò Fọ́tò Yíya· 2021

Aspen Orí Tripod

látọ̀wọ́ Colorado Tripod Company

Oníbàárà: Colorado Tripod Company

Aṣẹ́gun Àmì-ẹ̀yẹ Fàdákà A' Design Award nínú Ẹ̀ka Ohun-èlò Fọ́tò Yíya

39,753

Aṣẹ́gun Àmì Ẹ̀yẹ Tí a Jẹ́rìísí

Jẹ́rìísí Ipò Àmì Ẹ̀yẹ fún #108315

Ṣàbẹ̀wò Ojú Òpó Wo ní A' Design Award Ìwé Ìròyìn Àmì Ẹ̀yẹ

Àwọ̀

Àpẹrẹ Náà

Nípa Aspen Orí Tripod

Aspen jẹ́ orí tripod tí a ṣe láti mú ìṣètò fọ́tò rọrùn. Férémù tí ó ṣí sílẹ̀ ń jẹ́ kí kámẹ́rà tí a so mọ́ ọn lè yí kọjá 90 ìgun ní ọ̀nà méjèèjì, tí ó sì ń fúnni ní ìyípadà kíákíá láàrín ìṣètò ilẹ̀ ayé (landscape) àti ìṣètò àwòrán (portrait) láìsí àwọn L-bracket tí ó tóbi. Bọ́ọ̀lù náà ní àárín tí ó ṣófo pẹ̀lú àwọn ihò tí ó dín ìwọ̀n kù nígbà tí ó ń pa agbára mọ́. Ìdìmú léfà tí a lè ṣàtúnṣe ń dì oríṣiríṣi àwọn awo kámẹ́rà mú, ìdarí ìforí (friction control) ń ṣètò fífani, ìdálẹ́kùn yíyíká (panning lock) sì ń jẹ́ kí yíyíká pípé fún àwọn fọ́tò panoramic. A ṣe Aspen láti inú aluminiomu tí a ti ṣe anodize líle.

Ìdánimọ̀ Náà

Nípa Àmì-ẹ̀yẹ Fàdákà A' Design Award

Aspen Orí Tripod jẹ́ olùborí Àmì-ẹ̀yẹ Fàdákà A' Design Award, ìdánimọ̀ onípọ̀nlé lọ́nà àrà ọ̀tọ̀ tí a fún àwọn àwòṣe ìpele gíga jùlọ tó dára tó sì ń kan ọkàn. Àwọn olùborí Fàdákà jẹ́ àwọn iṣẹ́ tó ń tàn yòò gidigidi tó sì ní ìṣẹ̀dá púpọ̀ tí wọ́n ń ṣàfihàn ìmọ̀ ìjìnlẹ̀, ẹ̀bùn àti ìmọ̀ràn àwọn olùṣàwòṣe wọn. A retí pé Aspen Orí Tripod yóò jẹ́ iṣẹ́ àgbàyanu, àpẹẹrẹ rere, ti ọ̀jáfáfá lọ́nà tó ṣe pàtàkì tó sì ní ìmúṣẹ̀dá tuntun jinlẹ̀. Àwòṣe tó borí Àmì-ẹ̀yẹ Fàdákà A' Design Award yìí jẹ́ ohun ìmúṣẹ̀dá tó hàn gbangba gidigidi tí a mọrírì tó ń ṣe anfàní tó sì ń tì ààlà iṣẹ́ ọnà, sáyẹ́ǹsì, àwòṣe àti ìmọ̀-ẹ̀rọ síwájú. Aspen Orí Tripod jẹ́ ẹ̀dá tí ọ̀pọ̀lọpọ̀ ń ṣe ìlara, tó ń jí ìfẹ́ inú, tó ń mú ìmọ̀lára rere wá tó sì ń jí ìyàlẹ́nu àti ìyanu.

Lẹ́yìn Àpẹrẹ Náà

Àkójọ Ìròyìn

Àwọn ẹ̀tọ́, àwọn ọmọ ẹgbẹ́ àti àlàyé ìmọ̀ ẹ̀rọ tí olùṣàpẹrẹ pèsè.

Àwọn Ohun Àkànṣe: The Aspen tripod head provides photographers with a large range of motion to simplify photograph composition. An open frame design allows an attached camera to rotate well beyond 90 degrees in both directions for quick adjustments in both landscape or portrait orientations. The ball features a hollow core with holes to reduce weight while maintaining strength and the adjustable lever clamp offers a quick and secure attachment to a wide range of camera plates.
Ìwọ̀n àti Àpò: Width: 134 mm x Depth: 55 mm x Height: 95 mm
Weight: 440 g
Ball Diameter: 48 mm
Load Capacity: 13.6 kg
Àwọn Àkọlé: tripod head, ball head, camera support, tripod, photography accessory
Ìmọ̀-ẹ̀rọ Ìṣelọ́pọ̀: The Aspen is constructed primarily from aluminum 6061 which is hard anodized for increased scratch and corrosion resistance. Stainless steel and bronze are also utilized for interacting threaded parts. All parts are CNC machined with either live-tooling lathes or 5-axis mills and the machining process was fine-tuned over many iterations to optimize tolerances and fit. The custom locking knob is constructed of an injected molded rubber to improve feel and ergonomics.
Ìpèníjà Àpèsè: In order to maximize range of motion, an open framed design was chosen for the Aspen. However, the construction proved difficult to ensure proper locking force and rigidity. The locking pads have much less surface area than traditional ball heads, so a number of pad shapes and materials were tested to optimize the locking mechanism. The surface finish of the anodized ball also proved to be a factor in the locking force. Additionally, the correct tolerances of the interacting parts was difficult, as a balance between tight fit and smooth movement was needed to achieve the end result.
Ìwádìí: A wide variety of competitor references were studied for load capacity, vibration dampening, material selection, weight and mechanical operation. Various test rigs were created to acquire data in addition to disassembly and reconstruction of parts. A weight gauge was created to measure the max load of ball heads at various locations of load relative to the center of the ball. A vibration dampening and rigidity test was created using gyroscope and accelerometer devices attached to the ball heads. Using the data, our design team gained insight into the mechanisms and features that create a high-strength, rigid, low-weight tripod head. Range of motion was also evaluated in all of the tripod heads reviewed to ensure the Aspen exceeded the limits of traditional ball heads.
Ìmísí: The Aspen design is centered around increasing range of motion to simplify the process of compositional framing for photographers who need to align their cameras quickly. The open frame construction eliminates the need to adjust the tripod legs to level the camera and makes bulky L-brackets unnecessary for switching from landscape to portrait orientations.
Àkókò Iṣẹ́ Àkànṣe: The project started in 2018 and finished in early 2020 with all design, prototyping and manufacturing taking place in Denver, Colorado, USA. The product officially launched in July 2020.
Ìlànà Ìṣiṣẹ́: A camera is mounted on the adjustable lever clamp that is attached to the Aspen hollow ball. When adjustments are needed for compositional framing, the locking knob is released and the camera is rotated into position about the center axis of the ball and then re-locked. The friction control sets drag on the ball when moving freely for a customized experience. A panning lock can be tightened or loosened to create a secure lock or to rotate the ball head 360 degrees for panoramic photographs.
Àwọn Ìwé-ẹ̀rí Ohun-Ìmọ̀: Patent Pending. Application Number 29725750. David Graham Clark. 2020. USA
Àwọn Ọmọ Ẹgbẹ́: Colorado Tripod Company