Scramblefactor Ẹ̀rọ Kíkà Ìdarí Ọ̀nà Wíwọlé láti ọwọ́ Travis Baldwin - Crea Inc Design Ltd.

Scramblefactor Ẹ̀rọ Kíkà Ìdarí Ọ̀nà Wíwọlé láti ọwọ́ Travis Baldwin - Crea Inc Design Ltd. jẹ́ aṣẹ́gun olókìkí púpọ̀ ti 2025 Àmì-ẹ̀yẹ Irin A' Design Award nínú Ẹ̀ka Ìdíje Àpẹẹrẹ Ohun-èlò Ààbò, Ìdáàbòbò àti Ìṣọ́.

IrinOhun-èlò Ààbò· 2025

Scramblefactor Ẹ̀rọ Kíkà Ìdarí Ọ̀nà Wíwọlé

látọ̀wọ́ Travis Baldwin - Crea Inc Design Ltd.

Oníbàárà: Hirsch Secure

Aṣẹ́gun Àmì-ẹ̀yẹ Irin A' Design Award nínú Ẹ̀ka Ohun-èlò Ààbò

15,023

Aṣẹ́gun Àmì Ẹ̀yẹ Tí a Jẹ́rìísí

Jẹ́rìísí Ipò Àmì Ẹ̀yẹ fún #133213

Ṣàbẹ̀wò Ojú Òpó Wo ní A' Design Award Ìwé Ìròyìn Àmì Ẹ̀yẹ

Àwọ̀

Àpẹrẹ Náà

Nípa Scramblefactor Ẹ̀rọ Kíkà Ìdarí Ọ̀nà Wíwọlé

Scramblefactor jẹ́ ẹ̀rọ kíkà ìdarí ọ̀nà wíwọlé tí a ṣe àpẹrẹ rẹ̀ fún àwọn ojú ọ̀nà wíwọlé tí ó nílò ààbò. Ọ̀nà ìdámọ̀ mẹ́ta ni a ti so pọ̀: ẹ̀rọ kíkà káàdì, pátákò nọ́mbà tí ó farahàn lórí ìbojú ìfọwọ́kàn, àti ẹ̀rọ kíkà àtẹ́lẹwọ́. Àwọn nọ́mbà lórí pátákò náà máa ń yí ipò padà, nítorí náà kò ṣe é ṣe fún ẹnikẹ́ni tí ó bá ń wo láti kà kóòdù tí a tẹ̀. Ojú iwájú ẹ̀rọ náà (bezel) ni a fi pilasitiki tí a dà sínú àpẹrẹ (injection molded) ṣe, àti pé ìbojú àkànṣe náà lo dígí tí a ti sopọ̀ pẹ̀lú ọ̀nà opitikálì (optically bonded glass). A ti dí ẹ̀rọ kíkà náà pa dé ìwọ̀n IP65, ó sì lè ṣe àtúnṣe ní ibi tí a gbé kalẹ̀, nítorí pé a lè yí ìbojú àti àwọn ẹ̀yà inú padà nígbà tí ẹ̀rọ náà ṣì wà ní ipò tí a gbé kalẹ̀. A tún ń ṣe àwọn ìtòlẹ́sẹẹsẹ àfikún pẹ̀lú àwọn irinṣẹ́ àkànṣe (tooling inserts).

Ìdánimọ̀ Náà

Nípa Àmì-ẹ̀yẹ Irin A' Design Award

Scramblefactor Ẹ̀rọ Kíkà Ìdarí Ọ̀nà Wíwọlé jẹ́ olùborí Àmì-ẹ̀yẹ Irin A' Design Award, ìdánimọ̀ olókìkí tí a fún àwọn àwòṣe tó dára tí wọ́n pàdé àwọn ohun tí iṣẹ́ àti ilé-iṣẹ́ nílò tí a retí láti ọ̀dọ̀ àwọn ẹ̀dá tí a ṣàwòṣe dáradára. Àwọn olùborí Irin ń fi ìjáfáfá ńlá, ìmọ̀ pàtó gíga, òye ògbóǹtarìgì àti agbára ìṣẹ̀dá àwọn olùṣẹ̀dá wọn hàn. A retí pé Scramblefactor Ẹ̀rọ Kíkà Ìdarí Ọ̀nà Wíwọlé yóò jẹ́ ẹ̀dá tí a kà sí gidigidi, tí a gbóríyìn fún tí a sì nífẹ̀ẹ́, tó wúlò tó sì ní ìmúṣẹ̀dá tuntun. Àwòṣe tó borí Àmì-ẹ̀yẹ Irin A' Design Award yìí ń kó àwọn ọ̀nà tó dára jùlọ ilé-iṣẹ́ jọ, ó sì ní àwọn ànímọ́ ìmọ̀-ẹ̀rọ tó péye tí a so mọ́ ìmọ̀ ṣíṣe àti ẹ̀bùn. A bọ̀wọ̀ fún Scramblefactor Ẹ̀rọ Kíkà Ìdarí Ọ̀nà Wíwọlé nítorí ìfọ̀kànbalẹ̀ rẹ̀, a sì ṣàwòṣe rẹ̀ láti pèsè ìmúdára ìgbésí ayé tó ń ran ayé lọ́wọ́ láti di ibi tó dára jù.

Lẹ́yìn Àpẹrẹ Náà

Àkójọ Ìròyìn

Àwọn ẹ̀tọ́, àwọn ọmọ ẹgbẹ́ àti àlàyé ìmọ̀ ẹ̀rọ tí olùṣàpẹrẹ pèsè.

Àwọn Ohun Àkànṣe: The scramblefactor is a modern take on a classic security design. The overally goal was an update on the original design, adding functionality and an attactive look that blends into the user environment.

The original was individual depressable buttons with a tiny screen on each button. This version simplifies the construction with a touchscreen, and adds 2 more identification methods with a fingerprint and card reader. The multifactor verification ensures secure and accurate access control.

It is a field serviceable product - the screen and internal components can be easily changed while mounted.
Unique design for IP65 sealing.

With the touchscreen display, it's easy to clean front face.

The front bezel has optional configurations using a tooling insert... the fingerprint reader and/or card reader can be deleted from the tool to create variations on the product.
Ìwọ̀n àti Àpò: H 6.14 in. (15.6 cm) x W 4.45 in. (11.30 cm) x D 1.93 in. (4.90 cm)
Àwọn Àkọlé: Biometric, Identity, Access Control, Hirsch, Identiv, Crea Inc Dsign ltd.
Ìmọ̀-ẹ̀rọ Ìṣelọ́pọ̀: The product consistes of an injection molded plastic front bezel assembly that houses the pcb and components, such as the fingerprint reader and front glass display. The display has a custom front to fit the front recess and the custom gorilla glass is optically bonded.

There are multiple options for the rear cover.. either a sheet metal box, or a variaton of the box with a sheet metal sun visor. The front bezel assembly can also be mounted onto a wall, and the deeper parts extent into a standard off-the shelf plastic back-box mounted within the wall. A fourth option is a rear injection molded plastic back cover.
Ìpèníjà Àpèsè: The creative challenge was to make a friendly but serious asthetic on a durable and complex outdoor access control product. The look and feel would have to accomodate a complicated assembly process to house the 3 different ID technologies, and fit within pre-existing sheet metal boxes. The industrial design would have to be almost completely realized by only designing the multipart front bezel. Additional challenges to the industrial design were the waterproofing gaskets and field servicable requirements.
Ìwádìí: The scramblepad is a product concept where the numbers on an access keypad can change position, to prevent an onlooker from recognizing the pattern of movement when typing in a code for acess. Originally, the scramble pad had physical keys with small screens on each button that could change the number displayed. The Scramblefactor uses a ruggedized custom-made touchscreen to simpify the construction and improve durability. This screen was developed around available screen supply and process such as optical bonding with Gorilla Glass. The multi-factor biometric that's been added gives a much higher level of security, where development went into choosing components for functionality and fit into the small area we had beneath the touchscreen. Prototypes were used extensively, both form models and working prototypes. This helped determine functional mechanical solutions around the size, shape, and ergonomic comfort for the user, as well as the overall look and feel.
Ìmísí: Inspirations for the Scramble-Factor were high tech security devices out on the market today, however we pushed the design farther with sleek scifi movie inspiration. Previous Identiv brand language was used as an inspiration as well,
lookig how it could be evolved.
Àkókò Iṣẹ́ Àkànṣe: The project started in November 2021 and most of the industrial design engineering work happened during the course of 2022. The detailed mechanical and electrical engineering was completed in 2023 and production started that year.
Ìlànà Ìṣiṣẹ́: A user approaches a Hirsch access controlled entry point and the ScrambleFactor reader will be mounted nearby. The user would approach the device, then wake it up with a touch on the touchscreen. First LED on the badge reader would lite up, indicating that the badge should be scanned. Once verified, a graphic display of the numberpad will then be displayed on the main screen, with the numbers scrambled in a un-predictable way. (The numbers would not be consecutive) The user would enter his secret pin and because of the scrambled numbers, an observer would not be able to determine the pattern. Once the correct pin is entered, an LED would light up on the fingerprint reader indicating that a finger should be scanned. When the user scans and verified there fingerprint, the device sends a signal to the door to open.
Àwọn Ọmọ Ẹgbẹ́: Mark Butcher, Travis Baldwin, Sixtus Stanley, Jono Taylor
Ìfọwọ́sí Àwòrán: Image #1: Illustrator Travis Baldwin, Angled Bezel, 2022.
Image #2: Illustrator Travis Baldwin, Assembled in Sheet Metal Box, 2022.
Image #3: Illustrator Travis Baldwin, Assembled with Sheet Metal Sun Visor Box 1, 2022.
Image #4: Illustrator Travis Baldwin, Assembled with Plastic Back Box, 2022.
Image #5: Illustrator Travis Baldwin, Assembled with Sheet Metal Sun Visor Box 2, 2022.