设计师 Edvard Glazebrook 的作品 Arch 椅子、无靠背凳荣获了极具声望的 2021 A' Design Award 铜奖，竞赛类别为家具设计。

铜家具· 2021

Arch 椅子、无靠背凳

设计师： Edvard Glazebrook

家具类别A' Design Award 铜奖获奖者

11,029

已验证的获奖者

验证 #106853 的获奖状态

在A' Design Award上查看新闻稿获奖徽章

色彩

设计作品

关于 Arch 椅子、无靠背凳

Arch 是一款由雕刻并经黑色染色处理的层压松木制成的椅子与无靠背坐凳。设计以简洁而重复的形态与图形为基础，赋予家具统一而富有逻辑的表现力。五道完全相同的拱形构成了椅子的椅腿与靠背，而无靠背坐凳则由三个在中心相交的半拱组成。所有部件均以CNC雕刻机从层压木板上切割而成，随后以胶合与木榫方式接合。拱形曲线在家具最薄弱之处提供了额外的强度支撑。

荣誉认可

关于A' Design Award 铜奖

Arch 椅子、无靠背凳是 A' Design Award 铜奖得主，这是授予以创造力、独创性和敏锐见长的杰出设计的极具声望的认可。铜奖得主是技艺娴熟、创意惊人的作品，印证了其设计师丰富的经验、想象力与机智。预计Arch 椅子、无靠背凳将成为一件备受推崇、令人钦佩且被珍爱的物品，兼具显著的专业性与创新性。这件赢得 A' Design Award 铜奖的设计融入艺术、科学、设计和技术领域的最佳实践，并因注重细节而出类拔萃。Arch 椅子、无靠背凳出色地满足需求，触动渴望，迷住情感，并吸引好奇心。

设计幕后

媒体资料包

由设计师提供的致谢、团队成员及技术详情。

独特属性: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
尺寸与包装: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
标签: Wood, Chair, Stool, Pine wood, Arches, Curve
生产技术: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
设计挑战: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
研究: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
灵感: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
项目周期: The project started in march 2020 - and finished in late May 2020.
操作流程: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
专利: Copyrights belong to Edvard Glazebrook, 2020
团队成员: Edvard Glazebrook