Spark 旅行电吉他

设计师： Maxwell Brazo

客户: Maxwell Brazo

乐器类别A' Design Award 铜奖获奖者

39,941

已验证的获奖者

验证 #126635 的获奖状态

访问网站在A' Design Award上查看新闻稿获奖徽章

色彩

设计作品

关于 Spark 旅行电吉他

Spark 是一款专为便携性与居家制作而设计的旅行电吉他。琴身、琴颈与指板均采用熔融沉积成型（FDM）3D打印制成，以再生木纤维与芳纶复合材料替代传统硬木。其电子与机械配件均易于购得，装配则采用免焊接线系统。Spark 以传统工艺完成后期处理，包括打磨、品丝嵌装以及硝基漆涂装。无头固定琴桥的设计，使其在紧凑的形态中仍保留了完整的有效弦长。

荣誉认可

关于A' Design Award 铜奖

Spark 旅行电吉他是 A' Design Award 铜奖得主，这是授予以创造力、独创性和敏锐见长的杰出设计的极具声望的认可。铜奖得主是技艺娴熟、创意惊人的作品，印证了其设计师丰富的经验、想象力与机智。预计Spark 旅行电吉他将成为一件备受推崇、令人钦佩且被珍爱的物品，兼具显著的专业性与创新性。这件赢得 A' Design Award 铜奖的设计融入艺术、科学、设计和技术领域的最佳实践，并因注重细节而出类拔萃。Spark 旅行电吉他出色地满足需求，触动渴望，迷住情感，并吸引好奇心。

设计幕后

媒体资料包

由设计师提供的致谢、团队成员及技术详情。

独特属性: Focuses on sustainability, accessibility, and adaptability through use of computer aided design software and at-home manufacturing. Fully printed guitar body, neck, and fret board using alternatives to hardwoods. Recycled plastic and wood fiber composites used are able to be fully finished and assembled using simple and standard methods. All electrical and mechanical components are domestically sourced and widely available.
尺寸与包装: Product Dimensions: Width 133.35mm (5.25in) x Depth 57.15mm (2.25in) x Height 768.35mm (30.25in), Scale Length: 25.5in, Fret-Board Radius: 9.5 - Modern C Neck Profile - Single Coil & Humbucker Passive Pickups
- Body/Neck/Fretboard (Timber-fill/Nylon AF80 Aramid)
- Headless Fixed Bridge and Double-Ball End Combo Headpiece
- Angled Switch Tele Titanium Control Plate
- Neck Plate (Bolt-On Style)
- Electrosocket Jack Mount
- Low Profile Truss Rod
- Stainless-Steel Hardware and Threaded Inserts
- Solderless Wiring System
标签: Guitar, Electric, Travel, 3D Printed, Sustainablity, Instrument, Music, Design
生产技术: Realized through Computer-Aided Design and Fused Filament Fabrication technologies. Domestically sourced electrical and mechanical components. Finished using traditional methods (sanding, seating frets, binding, nitrocellulose lacquer finish, etc.).
设计挑战: Bio-composite filaments used, while recyclable and or compostable, do not provide adequate structural support for full-scale stringed instruments under tension. Complications with recycled wood-fiber composite filaments required research and testing of additional materials with more effective mechanical properties. Key attributes considered were creep resistance (resistance against deformation under long-term load), tensile strength, elongation at break, density, and ease of printing.
研究: Initial research into fundamental basics and history of electric guitar construction was crucial to ensure a playable end product. Standardized dimensions of classic high-end models helped to provide a familiar aesthetic and a framework to work within, and use of widely available and popular components to inform the overall design. Influenced by concepts such as compact modularity, right to repair, and the future of at-home manufacturing.
灵感: An exploration to replicate traditional luthier processes through new-age methods of small scale manufacturing and the pursuit of material alternatives for guitar-making. Informed by the idea that making a guitar should be more accessible and experiential; the vision for a transformative guitar able to be printed and assembled at home, inspired by vintage Fender, Steinberger, La Baye 2x4, and lap steel guitars.
项目周期: The continuation of thesis work while at Rochester Institute of Technology, this project has spent some time in design and development. Prototyping done in 2021 and final working model and process book to be completed in 2022. Based out of Litchfield, Connecticut.
操作流程: Printable and playable, an innovative solution to cost-effectively produce and assemble your own guitar using recyclable materials, encompassed within a compact full-scale travel silhouette.
图片版权: Image #1: Creator Maxwell Brazo, 2022.
Image #2: Creator Maxwell Brazo, 2022.
Image #3: Creator Maxwell Brazo, 2022.
Image #4: Photographer Maxwell Brazo, 2022.
Image #5: Creator Maxwell Brazo, 2022.