设计师 Xiao Xu and Qi Yanbin 的作品 Inogi R1 制氧机荣获了极具声望的 2023 A' Design Award 银奖，竞赛类别为医疗器械与医疗设备设计。

银医疗产品· 2023

Inogi R1 制氧机

设计师： Xiao Xu and Qi Yanbin

客户: Nanjing Yinuoji Medical Technology Co., Ltd.

医疗产品类别A' Design Award 银奖获奖者

145,264

已验证的获奖者

验证 #149906 的获奖状态

在A' Design Award上查看新闻稿获奖徽章

色彩

设计作品

关于 Inogi R1 制氧机

Inogi R1 是一款医用微型制氧机。该设备可提供高达每分钟 6 升的脉冲流量。Inogi R1 采用分子筛从空气中分离氧气,无需任何添加剂,氧浓度可达 90% 以上。自主研发的控制系统使其在海拔 6000 米以内、低至零下 30 摄氏度的环境中仍能稳定运行。装配电池后,机身尺寸为 17.7 × 7.7 × 19.4 厘米,重 1.8 千克。分子筛与电池均可一步完成更换。

荣誉认可

关于A' Design Award 银奖

Inogi R1 制氧机是 A' Design Award 银奖得主，这是授予顶级、华美而令人印象深刻的设计的极为崇高的认可。银奖得主是极其卓越、极具创造力的作品，展现出其设计师杰出的专业技能、才华与敏锐。预计Inogi R1 制氧机将成为一件出色的典范之作，兼具非凡的专业性与深刻的创新性。这件赢得 A' Design Award 银奖的设计是一项备受瞩目、令人钦佩的发明，造福并拓展艺术、科学、设计和技术的边界。Inogi R1 制氧机是一件令人羡慕的创作，它唤起渴望，带来积极的情感，并激发惊叹与赞叹。

设计幕后

媒体资料包

由设计师提供的致谢、团队成员及技术详情。

独特属性: INOGI-R1 is the first medical grade miniaturized oxygen concentrator with a pulse flow rate of up to 6 L/min. By integrating all functions of those 20kg concentrators from other brands in a compact size, INOGI-R1 is wildly used clinically. The in-house developed “Micro Pressure Control Analysis Technique” adapts to high pressure and low temperature conditions, which supports stable use even at high altitudes (6000m) or in low temperatures (-30°C). This product has been favored among consumers due to impressive performance and affordability.
尺寸与包装: With battery cell: 17.7*7.7*19.4cm, 1.8kg
Without battery cell: 17.7*7.7*16cm, 1.3kg
INOGI-R1 is 33% smaller and 23% lighter than similar products.
标签: Oxygen generator, miniaturized oxygen generator, COPD, aerospace materials, in-house innovation, medical device, portable device
生产技术: Backed by the in-house developed control system and an aerospace material compressor, this instrument only uses air instead of any additive to separate oxygen and nitrogen in the air, and filters out all kinds of impurities through the molecular sieve. It allows an unlimited access to oxygen at a concentration above 90% only depending upon power consumption. It comes with an efficient ARM processor that supports precise detection and fast signal processing. The in-house developed intelligent MAAS system simplifies the operation process and enables physical abnormality early warning and health advice, including breathing sensitivity control, breathing rate in-depth monitoring, and big data health management system.
设计挑战: The release of INOGI-R1 provides a good solution for the common technical problems of China’s medical oxygen machine products, including poor stability over a long time, inefficient working of molecular sieve, high power consumption and short service life of compressor, enhances the independent innovation capacity of China’s medical oxygen generators. At present, this product has been granted 47 patents and property rights, which fills the void of subminiaturized high-altitude ultra-low temperature medical grade portable oxygen supply in China, breaking the monopoly of overseas products.
研究: According to a survey, there are about 100 million patients with Chronic Obstructive Pulmonary Disease (COPD) in China, with the rate of missed diagnosis up to 70%, and most patients are often unaware of their discomfort. In this context, efforts should be made to raise the awareness of COPD and turn the scale of poor treatment. Backed by robust features, INOGI-R1 is believed to relieve the discomfort and pain caused by cardiopulmonary dysfunction.
灵感: The oxygen flow rate of commercially available products is up to 5L/min, which is only suitable for patients with mild illnesses and far from attaining the desired medical effect. These deficiencies motivate us to tailor a miniaturized oxygen concentrator with a pulse flow rate of up to 6L/min for lung disease patients with inaccessible oxygen supply.
项目周期: The project commenced in Nanjing, Jiangsu in September 2018, R&D of the complete unit was done and the revolutionary product INOGI-R1 was released in April 2021, exhibited at the IF and Red Dot in April and September 2022 respectively, and also exhibited at the IDPA Exhibition in Tokyo in November 2022.
操作流程: In addition to the medical field, the use of INOGI-R1 can be further extended to health care, high altitude exercises, highland travel, protection in exercise, emergency rescue, ect., and it is mainly intended for the elderly, children, pregnant women, sub-healthy white-collar workers and students. In addition, INOGI-R1 works properly at the highest altitude of 6,000m and the lowest temperature of -30℃, which immensely broadens the range of applications and scenarios. In the course of everyday use, 100W super charger is enough to keep the unit working for long hours without battery, reducing the environmental impact of battery. This instrument is continuously powered with working hours up to 6 hours after 2-hour fast charge, which can be used even in long hours of traveling. The molecular sieve and the battery can be installed and replaced with one-click operation.
团队成员: Xu Xiao、Qi Yanbin