Ozz 吊灯

设计师： Kazoo Design

客户: Kazoo Design Studio

照明类别A' Design Award 铁奖获奖者

5,322

已验证的获奖者

验证 #175682 的获奖状态

访问网站在A' Design Award上查看新闻稿获奖徽章

色彩

设计作品

关于 Ozz 吊灯

这款灯具设计的灵感源自巫师帽，并以最著名的巫师之一——奥兹（Oz）命名。其设计基于仅以圆形作为设计元素的理念，通过不同的波浪状变化演绎，从而勾勒出整体造型。尽管从不同视角观看时，灯具的轮廓保持相对一致，但流转变化的曲线却微妙地影响着人与灯具之间的互动。当观者围绕灯具移动时，会感受到犹如波浪起伏般的动态韵律。

荣誉认可

关于A' Design Award 铁奖

Ozz 吊灯是 A' Design Award 铁奖得主，这是授予满足人们对设计精良的创作所期待的专业与工业要求的优良设计的声望认可。铁奖得主展现出其创作者的高超技艺、高度专业化、专家级的理解力和创造能力。预计Ozz 吊灯将成为一件备受推崇、令人钦佩且被珍爱的创作，既实用又创新。这件赢得 A' Design Award 铁奖的设计整合了行业最佳实践，并拥有与专业知识和才华相结合的称职技术特性。Ozz 吊灯因其严谨而受到尊重，旨在提供有助于让世界变得更美好的生活品质改善。

设计幕后

媒体资料包

由设计师提供的致谢、团队成员及技术详情。

独特属性: This lamp’s form is defined by six curves based on the circle. The top and bottom circles are perfect circles, while the four in between ones are deformed and angled to create variation. Though the overall silhouette remains similar from different viewpoints, the shifting curves affect how the lamp interacts with ambient light across its’ surface.
尺寸与包装: Width: 30cm x Depth: 30cm x Height: 20cm
标签: Contemporary, Pendant Lamp, Wizard of Oz, Geometric
生产技术: The lamp design was made digitally and for its’ plaster mold production a prototype was 3d printed. Along with the prototype, the container that was used in order to place the prototype in and create the plaster mold, was also 3d printed. For this product, a small table that the mold can rest on, with a hole and a valve installed on its’ underside was used, in order to achieve a smooth drain out of the porcelain slip. This was done, in order to achieve the cleanest possible cast from a heavy mold, with the least amount of post clean-up.
设计挑战: Although the design and mold-making part proved to be straightforward, the biggest challenge arose during the firing of the porcelain. Finding the right temperature and firing programme for an object that has a large rim and irregular edges required a fair amount of tests.
研究: After designing the project and before jumping into its’ production, a prototype vessel was 3d printed in order to verify that an object with helical symmetry is in balance when suspended.
灵感: This lamp design draws inspiration from the form of a wizard’s hat; specifically, a tightly cropped interpretation that omits the brim and crown, leaving only the essence of its conical silhouette.
项目周期: The product was designed in early 2025 and production started in the summer of 2025. The entire process took place in Istanbul, Turkey.
操作流程: The lamp’s size and opening allow for it to be used as the main form of illumination in a space. Its’ sharp wavy edges create a sense of motion, while its’ smooth but also angular form allow it to blend into many space with different interior styles.
团队成员: Designer: Konstantinos Paradeisopoulos
Designer: Zeynep Onder Paradeisopoulos
图片版权: Image No 4: Shutterstock / jafara image was used as a backdrop for the lamp.