由設計師 Edvard Glazebrook 創作嘅 Arch 椅子、無靠背座椅係備受推崇嘅 2021 A' Design Award 銅獎得獎作品，獲獎類別為傢俱設計。

銅傢俱· 2021

Arch 椅子、無靠背座椅

由 Edvard Glazebrook

傢俱類別嘅 A' Design Award 銅獎得獎者

11,029

經驗證嘅獲獎者

驗證設計 #106853 嘅獲獎狀態

喺 A' Design Award 查看新聞稿獎項徽章

色彩

設計

關於 Arch 椅子、無靠背座椅

Arch係一張椅同一張無靠背座椅，用雕刻同黑色染色夾板松木製成。設計以簡單同重複嘅形態同形狀為基礎，令呢件傢俬呈現出統一同富邏輯性嘅表現方式。五個相同嘅拱形構成椅子嘅椅腳同靠背，而無靠背座椅就由三個喺中央交匯嘅半拱形組成。所有部件均以CNC雕刻機從夾板木板上切割而成，然後用木榫黏合拼接。呢啲弧線喺傢俬最脆弱嘅位置提供咗加固作用。

榮譽認可

關於A' Design Award 銅獎

Arch 椅子、無靠背座椅是 A' Design Award 銅獎得主，這是授予以創造力、獨創性和敏銳見長的傑出設計的極具聲望的認可。銅獎得主是技藝嫻熟、創意驚人的作品，印證了其設計師豐富的經驗、想像力與機智。預計Arch 椅子、無靠背座椅將成為一件備受推崇、令人欽佩且被珍愛的物品，兼具顯著的專業性與創新性。這件贏得 A' Design Award 銅獎的設計融入藝術、科學、設計和技術領域的最佳實踐，並因注重細節而出類拔萃。Arch 椅子、無靠背座椅出色地滿足需求，觸動渴望，迷住情感，並吸引好奇心。

設計背後

新聞資料包

由設計師提供嘅製作人員名單、團隊成員同技術詳情。

獨特屬性: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
尺寸同包裝: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
標籤: Wood, Chair, Stool, Pine wood, Arches, Curve
生產技術: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
設計挑戰: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
研究: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
靈感: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
項目時長: The project started in march 2020 - and finished in late May 2020.
操作流程: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
專利: Copyrights belong to Edvard Glazebrook, 2020
團隊成員: Edvard Glazebrook