由設計師 Kiyoshi Sugimoto 創作嘅 Wedge House 住宅係備受推崇嘅 2025 A' Design Award 銅獎得獎作品，獲獎類別為建築、樓宇及結構設計。

銅建築· 2025

Wedge House 住宅

由 Kiyoshi Sugimoto

客戶: Masato Ikuta

建築類別嘅 A' Design Award 銅獎得獎者

13,244

經驗證嘅獲獎者

驗證設計 #162815 嘅獲獎狀態

訪問網站喺 A' Design Award 查看新聞稿獎項徽章

色彩

設計

關於 Wedge House 住宅

Wedge House係一座三層住宅,座落於日本池田市一塊狭窄而斜坡陡峭嘅地皮上。楔形嘅横切面設計令最大嘅樓層設於頂部,而最細嘅樓層則位於地面以下,咁樣就唔會對原有嘅擋土牆造成額外嘅壓力。上面兩層以木材建造,地庫則用鋼筋混凝土建成。東西兩面牆身以銀色鍍層鋼板飾面,支撐住懸挑樓層,並將視野框向南方。二樓嘅起居空間可以通往一個視野開闊嘅露台。

榮譽認可

關於A' Design Award 銅獎

Wedge House 住宅是 A' Design Award 銅獎得主，這是授予以創造力、獨創性和敏銳見長的傑出設計的極具聲望的認可。銅獎得主是技藝嫻熟、創意驚人的作品，印證了其設計師豐富的經驗、想像力與機智。預計Wedge House 住宅將成為一件備受推崇、令人欽佩且被珍愛的物品，兼具顯著的專業性與創新性。這件贏得 A' Design Award 銅獎的設計融入藝術、科學、設計和技術領域的最佳實踐，並因注重細節而出類拔萃。Wedge House 住宅出色地滿足需求，觸動渴望，迷住情感，並吸引好奇心。

設計背後

新聞資料包

由設計師提供嘅製作人員名單、團隊成員同技術詳情。

獨特屬性: The site has a nice view, but it is narrow and has a steep slope, and due to area regulations, the building coverage ratio is a strict 40%.
In order to meet the required area to comply with strict regulations, we adopted a three-story mixed structure with two floors above ground made of wood and one floor below ground made of reinforced concrete.
The building has a wedge-shaped shape, with the second floor, which has the best view, as the living space and the largest area, and the area decreases as you go to the lower floors to avoid applying force to the retaining wall.
尺寸同包裝: Total floor area 111.16㎡　Width 5560mm x Depth 11000mm x Height 10190mm
標籤: Slopingland structure protruding structure wedge Basement mountainside
生產技術: The east and west walls are finished with silver galvalume steel plates, which support the cantilevered floor that protrudes from the basement, and at the same time serve to frame the view to the south.
The basement is a bedroom with a sense of security that feels like it's nestled on a slope. The first floor has a water area and a study with a view of the greenery of the park behind the deep eaves. From the sky terrace of the LDK on the 2nd floor, you can enjoy a panoramic view of the Osaka plains. This is a house where you can enjoy the three different slopes of Mt. Satsuki.
設計挑戰: Stable structural design with an underground shape that does not apply force to old retaining walls on a narrow, steeply sloped site, and a protruding structure for the wooden upper building.
研究: Research on stable structures with protruding shapes in wooden buildings
靈感: The site is located at the foot of Mt.Satsuki in Ikeda City, Osaka Prefecture, Japan. The site was narrow, and more than half of the site was on a steep slope.
Additionally, the site is located on an old, tall retaining wall, so the building had to be constructed in a way that would not put stress on the retaining wall.
Therefore, the building's cross-sectional shape is wedge-shaped, with the basement being the smallest and increasing as the floors rise.
項目時長: Design for the project began in September 2022 at a site in Ikeda City, Osaka Prefecture, and was completed in June 2024.
操作流程: A basement with a shape that does not apply force to the old retaining wall, and a pop-out floor structure for the upper wooden building to maintain the required area.
團隊成員: KIYOSHI SUGIMOTO
圖片來源: All photos and videos Hirofumi Imanishi