Die ontwerp Arch Stoel, Rugloos Sitplek deur Edvard Glazebrook is 'n hoogs gewaardeerde wenner van die baie prestigieuese 2021 A' Design Award in Brons in die Meubelontwerp-kompetisiekategorie.
BronsMeubels· 2021
Arch Stoel, Rugloos Sitplek
deur Edvard Glazebrook
Wenner van die A' Design Award in Brons in die Meubels-kategorie
Geverifieerde Toekenningswenner
Verifieer Toekenningsstatus vir #106853Die Ontwerp
Oor Arch Stoel, Rugloos Sitplek
Boekteks: Arch is 'n stoel en 'n rugloos sitplek gemaak van gesnyde en swart gebeitste gelamineerde pynhout. Die ontwerp is gebaseer op eenvoudige en herhalende vorms en vorme, wat die meubelstuk 'n homogene en logiese uitdrukking gee. Vyf identiese boë vorm die pote en die rugleuning van die stoel, terwyl die rugloos sitplek gemaak is van drie half-boë wat in die middel ontmoet. Alle onderdele word met 'n CNC-router uit 'n gelamineerde houtplaat gesny, daarna gelym en met houtkeggies saamgevoeg. Die kurwes versterk die meubelstuk by sy swakste punte.
Die Erkenning
Oor die A' Design Award in Brons
Arch Stoel, Rugloos Sitplek is 'n wenner van die A' Design Award in Brons, 'n hoogs prestigieuse erkenning wat toegeken word aan uitstaande ontwerpe wat gekenmerk word deur kreatiwiteit, vindingrykheid en skerpsinnigheid. Wenners in Brons is ruimskoots vaardige en opvallend kreatiewe artefakte wat die groot ervaring, verbeelding en vindingrykheid van hul ontwerpers bevestig. Daar word verwag dat Arch Stoel, Rugloos Sitplek 'n hoog aangeskrewe, bewonderde en gekoesterde voorwerp is wat merkwaardig professioneel en innoverend is. Hierdie ontwerp wat die A' Design Award in Brons gewen het, inkorporeer die beste praktyke in kuns, wetenskap, ontwerp en tegnologie en is uitstekend vanweë sy aandag aan detail. Arch Stoel, Rugloos Sitplek bevredig behoeftes pragtig, raak aan begeertes, bekoor gevoelens en spreek die nuuskierigheid aan.
Agter die Ontwerp
Persstel
Krediete, spanlede en tegniese besonderhede verskaf deur die ontwerper.
- Unieke Eienskappe
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Afmetings & Verpakking
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Etikette
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Produksietegnologie
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Ontwerpuitdaging
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Navorsing
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Inspirasie
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Projekduur
- The project started in march 2020 - and finished in late May 2020.
- Bedryfsvloei
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Patente
- Copyrights belong to Edvard Glazebrook, 2020
- Spanlede
- Edvard Glazebrook
Geborg
Verken Verder as Designers.org
Ontdek produkte, dienste en geleenthede van ons advertensiavennote.
Meer om te Ontdek
Verwante Ontwerpe
Ontdek meer bekroonde ontwerpe uit dieselfde kategorie, gekies op meriete.
