Arch Stolica, Stolica bez naslona od Edvard Glazebrook

Dizajn Arch Stolica, Stolica bez naslona od dizajnera Edvard Glazebrook je visoko cijenjeni dobitnik prestižne nagrade 2021 Brončana nagrada A' Design Award u kategoriji Dizajn Namještaja.

BronzaNamještaj· 2021

Arch Stolica, Stolica bez naslona

autor Edvard Glazebrook

Dobitnik nagrade Brončana nagrada A' Design Award u kategoriji Namještaj

11,198

Verificirani dobitnik nagrade

Verificirajte status nagrade za #106853

Pogledajte na A' Design Award Saopštenje za medije Značka nagrade

Boje

Dizajn

O dizajnu Arch Stolica, Stolica bez naslona

Arch je stolica i sjedalo bez naslona izrađeno od rezbarenog i crno bajcanog lameliranog borovog drveta. Dizajn se temelji na jednostavnim i ponavljajućim oblicima i formama, koji namještaju daju homogen i logičan izraz. Pet identičnih lukova formira noge i naslon stolice, dok je sjedalo bez naslona izrađeno od tri polovine luka koje se spajaju u centru. Svi dijelovi su isječeni iz laminirane drvene ploče pomoću CNC glodalice, a zatim zalijepljeni i spojeni drvenim tiplovima. Krivine ojačavaju namještaj na njegovim najslabijim tačkama.

Priznanje

O nagradi Brončana nagrada A' Design Award

Arch Stolica, Stolica bez naslona je pobjednik Brončane nagrade A' Design Award, visoko prestižnog priznanja koje se dodjeljuje izvanrednim dizajnima što se odlikuju kreativnošću, domišljatošću i oštroumnošću. Brončani pobjednici izdašno su vješti i upečatljivo kreativni artefakti koji potvrđuju golemo iskustvo, maštu i snalažljivost svojih dizajnera. Očekuje se da Arch Stolica, Stolica bez naslona bude visoko cijenjen, voljen i njegovan predmet koji je izuzetno profesionalan i inovativan. Ovaj dizajn koji je osvojio Brončanu nagradu A' Design Award uključuje najbolje prakse u umjetnosti, nauci, dizajnu i tehnologiji i izvrstan je zbog pažnje posvećene detaljima. Arch Stolica, Stolica bez naslona sjajno zadovoljava potrebe, dotiče želje, očarava osjećaje i privlači znatiželju.

Iza dizajna

Press komplet

Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.

Jedinstvena svojstva: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Dimenzije i pakovanje: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Oznake: Wood, Chair, Stool, Pine wood, Arches, Curve
Tehnologija proizvodnje: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Dizajnerski izazov: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
Istraživanje: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Inspiracija: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Trajanje projekta: The project started in march 2020 - and finished in late May 2020.
Tok rada: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Patenti: Copyrights belong to Edvard Glazebrook, 2020
Članovi tima: Edvard Glazebrook