Sprout Bicikl od JunXiang Cheng and Yi Yang

Dizajn Sprout Bicikl od dizajnera JunXiang Cheng and Yi Yang je visoko cijenjeni dobitnik prestižne nagrade 2022 Željezna nagrada A' Design Award u kategoriji Dizajn 3D Štampanih Oblika i Proizvoda.

Željezo3D Štampa· 2022

Sprout Bicikl

autor JunXiang Cheng and Yi Yang

Klijent: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Dobitnik nagrade Željezna nagrada A' Design Award u kategoriji 3D Štampa

31,470

Verificirani dobitnik nagrade

Verificirajte status nagrade za #137286

Pogledajte na A' Design Award Saopštenje za medije Značka nagrade

Boje

Dizajn

O dizajnu Sprout Bicikl

Sprout je bicikl proizveden trodimenzionalnim štampanjem. Okvir je oblikovan pomoću topološke optimizacije, koja raspoređuje materijal samo tamo gdje je potreban i smanjuje ukupnu potrošenu količinu. Statička analiza naprezanja metodom konačnih elemenata potvrđuje stabilnost strukture okvira. Konačni model je odštampan od najlona visoke gustoće. Bicikl mjeri 1630 mm u dužinu, 600 mm u širinu i 832 mm u visinu. Štampanje eliminiše potrebu za skupim kalupima, tako da svaki okvir može pratiti individualni dizajn.

Priznanje

O nagradi Željezna nagrada A' Design Award

Sprout Bicikl je pobjednik Željezne nagrade A' Design Award, prestižnog priznanja koje se dodjeljuje dobrim dizajnima što ispunjavaju profesionalne i industrijske zahtjeve očekivane od dobro dizajniranih kreacija. Željezni pobjednici pokazuju veliku vještinu, visoku specijalizaciju, stručno razumijevanje i kreativne kapacitete svojih stvaralaca. Očekuje se da Sprout Bicikl bude visoko cijenjena, voljena i njegovana kreacija koja je praktična i inovativna. Ovaj dizajn koji je osvojio Željeznu nagradu A' Design Award integrira najbolje industrijske prakse i ima kompetentne tehničke karakteristike povezane sa znanjem i talentom. Sprout Bicikl se poštuje zbog svoje temeljitosti i dizajniran je da pruži poboljšanja kvaliteta života koja pomažu da svijet postane bolje mjesto.

Iza dizajna

Press komplet

Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.

Jedinstvena svojstva: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Dimenzije i pakovanje: Length 1630mm, width600mm, height 832mm
Oznake: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Tehnologija proizvodnje: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Dizajnerski izazov: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Istraživanje: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Inspiracija: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Trajanje projekta: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Tok rada: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Članovi tima: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao