Puthaw Teknolohiya sa Impormasyon · 2021

Rx1 IOT Controller

by Travis Baldwin

A' Design Award nga Puthaw 2021 in Teknolohiya sa Impormasyon
CLIENT: Crea Inc Design Ltd.
Estimated Number of Design Views: 62,900
Verification code 537CEFB88A · Verify this award

Visit Site View at A' Design Award Press Release

Colors

About Rx1 IOT Controller

Ang Rx1 usa ka security controller nga naglink sa access readers ug mga trangka ug nagdesisyon kung tugotan ba ang access. Ang unit gimontar sa usa ka DIN rail sulod sa electronics closet, mao nga ang porma niini gihimo nga simple ug angay sa maong konteksto. Ang giimprinta nga mga graphics nagpakita kung asa nga wire ang konektado sa matag plug pin, ug ang mga LED nagpakita kung asa nga plug ang naay depekto. Ang internal atrium ug side vents nagpabugnaw sa processor kung ang housing gimontar sa dingding. Ang mga LED board naa duol sa nawong, nga nagwagtang sa panginahanglan alang sa light pipes. Ang case hinimo gikan sa flame resistant plastic.

About the A' Design Award nga Puthaw

Rx1 IOT Controller usa ka mananaog sa A' Design Award nga Puthaw, usa ka dungganon nga pag-ila nga gihatag sa maayong mga disenyo nga nakatagbo sa propesyonal ug industriyal nga mga gikinahanglan nga gipaabot gikan sa maayo ang pagkadisenyo nga mga paglalang. Ang mga mananaog sa Puthaw nagpakita og dakong kahanas, taas nga espesyalisasyon, eksperto nga pagsabot, ug mamugnaon nga abilidad sa ilang mga tiglalang. Gilauman nga ang Rx1 IOT Controller mahimong gipabilhan, gihangaan, ug gihigugma nga paglalang nga praktikal ug bag-o. Kini nga disenyo nga nakadaog og A' Design Award nga Puthaw naghiusa sa labing maayong mga praktis sa industriya ug adunay hanas nga teknikal nga mga kinaiya nga nalambigit sa kahibalo ug talento. Rx1 IOT Controller gitahod tungod sa pagkamaabtik niini ug gidisenyo aron maghatag og mga pagpaayo sa kalidad sa kinabuhi nga makatabang sa paghimo sa kalibutan nga mas maayong dapit.

Press Kit

Unique Properties: Aesthetics set Rx1 apart from other products in its category, but are appropriate for the context.
Embodies brand building design features that can be reused for other products (info/brand face, vents, & rounded form).
Atrium cooling strategy is optimized for cooling the processor in wall mounted orientation.
Innovative led mount strategy eliminates light pipes. Graphics allowing clusters of remote led.
Ease of use via graphics indicating what circuit has issues and easy din mount install.
Dimensions & Packaging: Overall size is 8.0 x 4.5 x 1.75in (203.5 x 114.8 x 44.5 mm). It is made from Flame resistant plastic and is optimized for UL safety. Rx1 controls two doors and two access devices, plus connectivity on Ethernet RJ45. System status is indicated by led for each plug and a status indicator relaying information. There is a hidden reset button and a tamper sensor indicating unauthorized access. Various DIN rail mounts can used and have been specified/ configured for ease of accessibility. Wiring is easy to using phoenix plugs. Powered by Rasberrry Pi cm4, it replaces the Hirsch Mx1.
Tags: Security, Controller, DIN, IOT, Badge Access, Door Locks, Access Control
Production Technology: The product is made up of custom built electronics and plastics, as well as off the shelf parts. The electronics schematic was started when ID started, consisting of a Raspberry Pi compute pcb and an I-O pcb. As we developed device architecture concepts and each was evaluated for easy of use, aesthetics, and performance. When a form was chosen, the design was developed from the outside-in, ie. We started with best form in respect to setup, mounting, servicing, and information architecture. The pcb layout architecture was driven by this, and is an example of design led engineering.
Design Challenge: The hardest part was to create appropriate design for the context. DIN rail spaces in electronics closets are not visible and hide unsightly devices. Design styling that is dramatic or overdesigned would waste the mfg costs as it would not be seen and may turn customers away from company products. Perceived value of the product would be directly influenced by the design styling. It should appear a high quality performance product, based on solid engineering and not flash. Design challenges were cooling, access to DIN mounts, and fitting text on the top surface.
Research: Primary and secondary research were employed for the Rx1 design. Two research objective were to create a good user experience build an appropriate design language for the category. Usability research came from the client, installers, and forums. Valuable info such as the reliance on flat head screwdriver installation and importance of diagnostic led. For styling, date came from competitive audits, style reference, and company brand. Learnings were that the vent area could be a brand feature, and the distinctive red color is important to represent.
Inspiration: Inspiration was tasteful design that stands out from competition, but is not overdesigned nor compromises ease of use - Rx1 is a highly functional product and lives in device closets among other utilitarian products.
Brief was to not "design a box" but have appropriate style for context. Also to build brand design language including prominently displayed brand graphics such as red circle motif.
Inspiring products were consumer routers and external hard drives, particularly with vents.
Project Duration: The project was started in November 2020, in both Bristol, UK and Santa Ana, California. The project was finished in March 2021, is in manufacturing now, and will be released in Spring 2021.
Operation Flow: Rx1 is a security controller linking access readers and locks, and making decisions on allowing access. The device is mounted in an electronics closet, only opened if there is an issue. During install, Rx1 is attached to a Din rail, among other devices. Inputs and outputs are wired using phoenix plugs (multiple wires fixed with screws, then plugged in). Printed text indicates what wire goes to which plug pin. During diagnostic, LEDs indicate which plug has a fault. To remove, the DIN mount is disengaged from the wall with either a flat head screwdriver or via depressing a spring release.
Image Credits: Image #1 : Industrial Designer Travis Baldwin, Overhead, 2021
Image #2 : Industrial Designer Travis Baldwin, See Through, 2021
Image #3 : Industrial Designer Travis Baldwin, In Context, 2021
Image #4 : Industrial Designer Travis Baldwin, Details, 2021
Image #5 : Industrial Designer Travis Baldwin, Exploded, 2021