Ir al contenido
Rockit Mecedora para cochecito de Rockit Design Team

El diseño Rockit Mecedora para cochecito de Rockit Design Team es un ganador altamente estimado del prestigioso 2021 A' Design Award de Plata en la categoría de competición Diseño de Productos para Bebés.


PlataProductos para Bebés· 2021

Rockit Mecedora para cochecito

de Rockit Design Team

Cliente: Rockit

Ganador del A' Design Award de Plata en la Categoría Productos para Bebés

32,679

Ganador de Premio Verificado

Verificar Estado del Premio para #123449

Colores

El Diseño

Acerca de Rockit Mecedora para cochecito

Rockit es una mecedora compacta que se acopla a un cochecito o una silla de paseo y lo balancea suavemente para ayudar a que los bebés se duerman. Rockit emplea un sistema de doble fijación: se instala un soporte en la parte alta del chasis del cochecito y el dispositivo se engancha en ese soporte cuando se necesita. El dispositivo puede trasladarse a otro cochecito o guardarse cuando no se utiliza. Un pulsador enciende Rockit y un regulador de velocidad ajusta la vibración a la frecuencia de resonancia del chasis, generando un balanceo suave de baja frecuencia. Las pruebas demuestran que el movimiento es comparable al balanceo manual. La mayoría de las piezas están moldeadas por inyección en ABS con sobremoldeos de TPR.

El Reconocimiento

Acerca del A' Design Award de Plata

Rockit Mecedora para cochecito ha ganado el A' Design Award de Plata, un reconocimiento extraordinariamente prestigioso concedido a diseños de gama alta, magníficos e impresionantes. Los ganadores de Plata son obras tremendamente brillantes y sumamente creativas que ilustran la destacada experiencia, el talento y la agudeza de sus diseñadores. Se espera que Rockit Mecedora para cochecito sea una obra maravillosa y emblemática, notablemente profesional y profundamente innovadora. Este diseño ganador del A' Design Award de Plata es una invención muy notable y admirada que beneficia y hace avanzar las fronteras del arte, la ciencia, el diseño y la tecnología. Rockit Mecedora para cochecito es una creación enormemente envidiada que evoca deseos, aporta sentimientos positivos y despierta asombro y admiración.

Detrás del Diseño

Kit de Prensa

Créditos, miembros del equipo y detalles técnicos proporcionados por el diseñador.

Propiedades Únicas
Rockit attaches to any pram or stroller and gently rocks to soothe babies to sleep. There is nothing quite like Rockit on the market, with other solutions being large mains operated platforms that you wheel the stroller onto. Rockit is attached to the stroller using a 2-fix system meaning it can easily be switched to another stroller or safely stored when not in use. The speed control allows you to tune the Rockit to the resonant frequency of any pram or stroller to achieve the perfect rock that makes the baby believe they are still being pushed along.
Dimensiones y Embalaje
85mm x 95mm x 155mm
Etiquetas
stroller rocker, baby sleep-aid, pram rocker, baby sleep aid, portable baby rocker, pushchair rocker
Tecnología de Producción
With the design making use of a spinning eccentric weight, early development work focused on testing the optimum mass and distance from the motor spindle. This was combined with testing the RPM of the motor to achieve a gently low frequency rock when fitted to a variety of stroller weights and sizes. Developing a system to start the heavy weight spinning even when mounted horizontally was also important. Regarding production, the majority of parts are injection moulded in ABS with some having TPR over-moulds.
Desafío de Diseño
The main creative challenge was getting the branding and styling of the product right. The design team wanted the product to stand out in the nursery sector as many nursery products are very ‘twee’ or can look quite medical in appearance. It was important that the product looked nurturing and not too toy-like. Because the product would be on display when in use we wanted it to attract attention and act as a advertisement, hence the strong Rockit branding.
Investigación
Quantitative research to measure levels of vibration acting on a stroller when rocked by Rockit, by hand and by wheeling over paving stones. Objective was to ensure acceleration measurements were comparable and within expected limits. Measurements were undertaken using 2 different accelerometers fixed to the stroller in a variety of positions. It was found that moving the stroller over paving stones, resulted in significantly higher levels of acceleration than those generated by Rockit and that rocking the stroller by hand was approximately comparable in each of the measurements.
Inspiración
Dr. Nick Webb invented Rockit when his three month old daughter refused to sleep in her stroller unless she was being pushed along. He noticed this problem affected other parents and using his knowledge of vibration and acoustics constructed a simple prototype. He tested it the next day and Abby remained asleep even when the stroller came to a halt. Nick set about developing and refining it with his co-founder Matt Dyson. Over the next year they turned the prototype into a marketable product.
Duración del Proyecto
The project was started in Bristol, UK in late 2015. The initial concept won a Design Council Spark Award in London during September 2016. The first production samples were exhibited at the Kind und Jugend Nursery Show in the Cologne in September 2017. The Rockit was launched to market in November 2017.
Flujo de Operación
Rockit is attached to the stroller using a 2-fix system. The bracket is attached high up on the stroller frame first and the Rockit can then be clipped into the bracket when needed. This also means it can be switched to another stroller or safely stored when not in use. The Rockit is turned on using a push switch and the speed is then adjusted using a speed dial. This adjustment allows the user to tune the vibrations to the resonant frequency of the stroller giving a gentle low frequency rock.
Patentes
Patent pending. Patent number GB1705215.0. Patent holders N2M Ltd. Year 2017
UK Trademark UK00003148555. Year 2016. Trademark holder N2M Ltd.
Other trademarks: USA 88272320 and 5289937. EU 88272320. Australia 1879106. Canada 1863104. Japan 6158102. New Zealand 1081472. China 21004784. Israel 305973. South Korea 4015283950000. Russia 2019708217. Taiwan 01977936.
Registered Design / Design Patents: EU 003376920-0001. Canada 176798. USA USD845181S.
Miembros del Equipo
Dr. Nick Webb
Matt Dyson
Matt Sparrow
Gary Pyper
Créditos de Imagen
All images. Chris Rickman, photographer, 2017
Video Credits: Barry Wilkinson, 2017

Patrocinado

Explora Más Allá de Designers.org

Descubre productos, servicios y oportunidades de nuestros socios publicitarios.

El Buen Diseño Merece un Gran Reconocimiento

El A' Design Award es un galardón internacional con jurado para el buen diseño. Participa en el A' Design Award para tener la oportunidad de obtener reconocimiento meritocrático, ganar fama, prestigio y publicidad para tu trabajo. Nomina tu trabajo para el A' Design Award y compite por el codiciado A' Design Prize.

Nominar