Arch Stoel, Stoel sûnder Rêchleuning troch Edvard Glazebrook is in heech wurdearre winner fan de tige prestizjeuze 2021 A' Design Award yn Brûns yn de kompetysje-kategory Meubelûntwerp.
BrûnsMeubels· 2021
Arch Stoel, Stoel sûnder Rêchleuning
troch Edvard Glazebrook
A' Design Award yn Brûns Winner yn de kategory Meubels
Ferifiearre Priiswinner
Ferifiearje Prisstatus foar #106853It Untwerp
Oer Arch Stoel, Stoel sûnder Rêchleuning
Arch is in stoel en in sitsje sûnder rêchleuning, makke fan besnien en swart beitse laminearre grienehout. It ûntwerp is basearre op ienfâldige en repetearjende foarmen en figueren, dy't it moaststik in homogene en logyske útstrieling jouwe. Fiif identike bôgen foarmje de poaten en de rêchleuning fan de stoel, wylst it sitsje sûnder rêchleuning makke is fan trije heale bôgen dy't yn it midden byinoar komme. Alle ûnderdielen binne mei in CNC-freesmasine út in laminearre houten plaat snien, en dêrnei limme en ferbûn mei houten pinnen. De bôgen fersterkje it moaststik op syn swakste punten.
De Erkenning
Oer de A' Design Award yn Brûns
Arch Stoel, Stoel sûnder Rêchleuning is in winner fan de A' Design Award yn Brûns, in heech prestisjeuze erkenning foar treflike ûntwerpen dy't har ûnderskiede troch kreativiteit, fernuft en tûkens. Brûnswinners binne tige feardige en opfallend kreative artefakten dy't de grutte ûnderfining, ferbylding en betochtsumens fan har ûntwerpers befêstigje. Fan Arch Stoel, Stoel sûnder Rêchleuning wurdt ferwachte dat it in tige heech achte, bewûndere en dierber objekt is dat opmerklik profesjoneel en ynnovatyf is. Dit winnende ûntwerp fan de A' Design Award yn Brûns yntegrearret de bêste praktiken yn keunst, wittenskip, ûntwerp en technology en is treflik om syn omtinken foar detail. Arch Stoel, Stoel sûnder Rêchleuning foldocht behoeften prachtich, reitsjet winsken, betsjoeveret gefoelens en sprekt nijsgjirrigens oan.
Efter it Untwerp
Parsepakket
Credits, teamleden en technyske details levere troch de ûntwerper.
- Unike Eigenskippen
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Ofmjittingen & Ferpakking
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Labels
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Produksjetechnology
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Untwerpútdaging
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Undersyk
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Ynspiraasje
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Projektdoer
- The project started in march 2020 - and finished in late May 2020.
- Operaasjestreamferrin
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Patinten
- Copyrights belong to Edvard Glazebrook, 2020
- Teamleden
- Edvard Glazebrook
Sponsore
Ferkenne Fierder as Designers.org
Untdek produkten, tsjinsten en mooglikheden fan ús reklamepartners.
Mear te Ûntdekken
Relatearre Untwerpen
Ûntdek mear priiswinnende ûntwerpen út deselde kategory, selektearre op fertsjinste.
