DefeXtiles Textyltechnyk troch Jack Forman

DefeXtiles Textyltechnyk troch Jack Forman is in heech wurdearre winner fan de tige prestizjeuze 2021 A' Design Award yn Brûns yn de kompetysje-kategory 3D-printe Foarmen en Produkten Ûntwerp.

Brûns3D-printsjen· 2021

DefeXtiles Textyltechnyk

troch Jack Forman

Klant: Tangible Media Group, MIT Media Lab

A' Design Award yn Brûns Winner yn de kategory 3D-printsjen

34,002

Ferifiearre Priiswinner

Ferifiearje Prisstatus foar #112633

Besykje Side Besjoch by A' Design Award Parseberjocht Priisbadge

Kleuren

It Untwerp

Oer DefeXtiles Textyltechnyk

DefeXtiles is in technyk foar it produsearjen fan tinne, bûchsume textyl op standert 3D-printers. De metoade bestjoert ûnder-ekstruzje sadat lytse bultsjes foarme wurde mei fine triedden dertusken. De ûntsteande periodike iepeningen jouwe it printe materiaal in textylachtich uterlik, mei sykhaligens, bûchsumens en rek, sels by starre materialen lykas polymelksoer (PLA). It textyl wurdt loodrecht op it printbêd printe, wêrtroch plisseeën en bûchde foarmen makke wurde kinne. Tapassingen omfetsje klean, taasten-ynterfaces en shuttles. Konduktive filamint kin schakelbanen ynbêde yn it materiaal.

De Erkenning

Oer de A' Design Award yn Brûns

DefeXtiles Textyltechnyk is in winner fan de A' Design Award yn Brûns, in heech prestisjeuze erkenning foar treflike ûntwerpen dy't har ûnderskiede troch kreativiteit, fernuft en tûkens. Brûnswinners binne tige feardige en opfallend kreative artefakten dy't de grutte ûnderfining, ferbylding en betochtsumens fan har ûntwerpers befêstigje. Fan DefeXtiles Textyltechnyk wurdt ferwachte dat it in tige heech achte, bewûndere en dierber objekt is dat opmerklik profesjoneel en ynnovatyf is. Dit winnende ûntwerp fan de A' Design Award yn Brûns yntegrearret de bêste praktiken yn keunst, wittenskip, ûntwerp en technology en is treflik om syn omtinken foar detail. DefeXtiles Textyltechnyk foldocht behoeften prachtich, reitsjet winsken, betsjoeveret gefoelens en sprekt nijsgjirrigens oan.

Efter it Untwerp

Parsepakket

Credits, teamleden en technyske details levere troch de ûntwerper.

Unike Eigenskippen: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
Labels: textile, 3d print, lace, advanced manufacturing, fabric
Produksjetechnology: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
Untwerpútdaging: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
Undersyk: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
Ynspiraasje: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
Projektdoer: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
Operaasjestreamferrin: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
Teamleden: Jack Forman, Mustafa Doga Dogan, Hamilton Foryseth and Hiroshi Ishii