Aida Sekkei Precut Fabryk troch Nobuaki Miyashita

Aida Sekkei Precut Fabryk troch Nobuaki Miyashita is in heech wurdearre winner fan de tige prestizjeuze 2024 A' Design Award yn Goud yn de kompetysje-kategory Arsjitektuer, Gebou en Struktuerûntwerp.

GoudArsjitektuer· 2024

Aida Sekkei Precut Fabryk

troch Nobuaki Miyashita

Klant: Aida Sekkei Co., Ltd.

A' Design Award yn Goud Winner yn de kategory Arsjitektuer

150,107

Ferifiearre Priiswinner

Ferifiearje Prisstatus foar #160159

Besykje Side Besjoch by A' Design Award Parseberjocht Priisbadge

Kleuren

It Untwerp

Oer Aida Sekkei Precut Fabryk

It nije fabryksplan fan Aida Sekkei rjochtet him op it foarsnijen fan hout. It konsept draait allegearre om it skepen fan in arsjitektuer dy't de searje fan houtferwurking fertsjintwurdiget. It omfettet in swevend, glêzen ôfsletten rinpaad fan likernôch 100 meter lang binnen de fabryk, ûntwurpen foar besikers om it folsleine foarsnijproses fan tichtby te observearjen. It kantoargebou hat grutte romten mei spantkonstruksjes makke fan skine râne materialen, dy't meastal brûkt wurde as ûndermaterialen yn houten huzen. It ûntwerp yntegrearret alle eleminten om in showcase fabryk te skepen, mei nâdruk op sichtberens en esthetysk oansjen yn elk aspekt.

De Erkenning

Oer de A' Design Award yn Goud

Aida Sekkei Precut Fabryk is in winner fan de A' Design Award yn Goud, in ekstreem prestisjeuze erkenning foar earste-klas, prachtige en treflike ûntwerpen. Goudwinners binne tige ynnovative, fisionêre en glamoureus ferbjusterjende skeppings dy't it sjeny, de wiisheid en de feardigens fan har ûntwerpers wjerspegelje. Fan Aida Sekkei Precut Fabryk wurdt ferwachte dat it in tige priizge, trendsettende en monumintale útfining is dy't unferlykbere wearde leveret. Dit winnende ûntwerp fan de A' Design Award yn Goud is in spektakulêr, respektearre projekt dat grutte foardielen bringt en de grinzen fan keunst, wittenskip, ûntwerp en technology ferleget. Aida Sekkei Precut Fabryk makket yntinse gefoelens fan begearte, stekt passy oan, stimulearret kreativiteit en fassinearret ús.

Efter it Untwerp

Parsepakket

Credits, teamleden en technyske details levere troch de ûntwerper.

Unike Eigenskippen: This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
Ofmjittingen & Ferpakking: Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2

Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden

Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2
Labels: architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
Produksjetechnology: As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
Untwerpútdaging: When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
Undersyk: Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
Ynspiraasje: Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
Projektdoer: This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
Operaasjestreamferrin: This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
Patinten: None
Ofbyldingskrediten: Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020