Is buaiteoir an-mheasúil den ghradam fíor-ardghradamach 2021 Duais Cré-umha A' Design Award sa Chatagóir Comórtais Dearadh Troscáin é an dearadh Arch Cathaoir, Cathaoir Gan Dromán le Edvard Glazebrook.
Cré-umhaTroscán· 2021
Arch Cathaoir, Cathaoir Gan Dromán
Buaiteoir an ghradaim Duais Cré-umha A' Design Award sa Chatagóir Troscán
Buaiteoir Gradaim Fíoraithe
Fíoraigh Stádas Gradaim do #106853An Dearadh
Maidir le Arch Cathaoir, Cathaoir Gan Dromán
Is cathaoir agus suíochán gan dromán é Arch, déanta as adhmad péine dhuillithe, snoite agus stánta dubh. Tá an dearadh bunaithe ar fhoirmeacha simplí agus athdhúblacha, a thugann léiriú aonchineálach agus loighciúil don troscán. Cruthaíonn cúig áirse comhionanna na cosa agus dromán na cathaoire, agus déantar an suíochán gan dromán as trí leatháirse a thagann le chéile sa lár. Gearrtar gach píosa ó phláta adhmaid dhuillithe le innealra CNC, agus ansin greamaítear agus nasctar iad le dabhlaí adhmaid. Neartaíonn na cuair an troscán ag na pointí is laige ann.
An Aitheantas
Maidir leis an Duais Cré-umha A' Design Award
Bhuaigh an dearadh Arch Cathaoir, Cathaoir Gan Dromán Duais Cré-umha A' Design Award, aitheantas an-ghradamach a bhronntar ar dhearaí sármhaithe a mbíonn cruthaitheacht, aireagacht agus géarchúis mar shaintréithe acu. Is déantúsáin ghlic agus chruthaitheacha go suntasach iad buaiteoirí Cré-umha a dhearbhaíonn taithí fhairsing, samhlaíocht agus acmhainneacht a ndearthóirí. Táthar ag súil go mbeidh an dearadh Arch Cathaoir, Cathaoir Gan Dromán ina rud a bhfuil an-mheas air, a n-ardaítear agus a ghráitear, atá thar a bheith gairmiúil agus nuálach. Ionchorpraíonn an dearadh seo a bhuaigh Duais Cré-umha A' Design Award na cleachtais is fearr san ealaín, san eolaíocht, sa dearadh agus sa teicneolaíocht, agus tá sé sármhaith as a aird ar mhionsonraí. Sásaíonn an dearadh Arch Cathaoir, Cathaoir Gan Dromán riachtanais go hálainn, bainíonn sé le mianta, cuireann sé draíocht ar mhothúcháin agus tarraingíonn sé fiosracht.
Taobh Thiar den Dearadh
Pacáiste Preasa
Creidiúintí, baill foirne agus sonraí teicniúla curtha ar fáil ag an dearthóir.
- Airíonna Uathúla
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Toisí & Pacáistiú
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Clibeanna
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Teicneolaíocht Táirgthe
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Dúshlán Deartha
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Taighde
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Inspioráid
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Fad an Tionscadail
- The project started in march 2020 - and finished in late May 2020.
- Sreabhadh Oibríochta
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Paitinní
- Copyrights belong to Edvard Glazebrook, 2020
- Baill Foirne
- Edvard Glazebrook
Urraithe
Déan Iniúchadh Lasmuigh de Designers.org
Aimsigh táirgí, seirbhísí agus deiseanna ónár gcomhpháirtithe fógraíochta.
Tuilleadh le hIniúchadh
Dearaí Gaolmhara
Déan iniúchadh ar thuilleadh dearaí a bhuaigh gradam sa chatagóir chéanna, roghnaithe de réir fiúntais.
