ʻO Guangming Public Service Hale Keʻena Aupuni na Zhubo Design Co., Ltd. he mea lanakila hanohano loa o ka 2021 A' Design Award Palatina ma ka Māhele Hoʻokūkū Hoʻolālā Hale, Kūkulu a me Hōʻuluʻulu.
PalatinaHoʻolālā Hale· 2021
Guangming Public Service Hale Keʻena Aupuni
Mea Kūʻai: Zhubo Design
Mea Lanakila A' Design Award Palatina ma ka Māhele Hoʻolālā Hale
Mea Lanakila i Hōʻoia ʻIa
Hōʻoia i ke Kūlana Makana no #110344Ka Hoʻolālā
E Pili Ana iā Guangming Public Service Hale Keʻena Aupuni
ʻO Guangming Public Service he hale keʻena aupuni a me ka lawelawe lehulehu ma Shenzhen, Kina. Ua māhele ʻia ka hale i ʻelua ʻāpana me nā kino ʻokoʻa. Aia nā keʻena ma ka ʻāpana huinahā lōʻihi o luna, a aia ma ka ʻāpana o lalo kahi keʻena lawelawe lehulehu me ke kaupoku ʻaleʻale i hana ʻia e like me ka lālani mauna. Ua mālama ʻia nā puʻu liʻiliʻi ʻelua ma ka wahi kūkulu, a ma laila e hōʻemi ai i ka ʻeli ʻana a e hoʻonui ai i ka ʻāina uliuli e puni ana. Ua pale ka papahana i ka hoʻonohonoho pani ʻia i mea maʻamau ma nā hale aupuni o Kina. Ua hahai ka hoʻolālā i ke ʻano hoʻomohala ʻōmaʻomaʻo me ka hopena haʻahaʻa.
Ka Hoʻomaikai
E Pili Ana i ka A' Design Award Palatina
Ua lanakila ka hoʻolālā Guangming Public Service Hale Keʻena Aupuni i ka A' Design Award Palatina, he ʻike hoʻohanohano nui i hāʻawi ʻia i nā hoʻolālā ʻoiaʻiʻo loa ka kūʻokoʻa, ka nani a me ka kamahaʻo. He mau mea kupaianaha o ka hana noʻeau nā lanakila Palatina, he mau hōʻike o nā palena o ka noʻonoʻo hana noʻeau, a hōʻike lākou i ka ʻoihana ʻoi aku a me ka ʻuhane akamai o kā lākou poʻe hoʻolālā. Manaʻo ʻia ʻo kēia mau hoʻolālā nā hana kaulana loa e wehewehe ana i ka nani o kekahi au, kōkua i ke ola pono o ke kaiāulu a hoʻoneʻe i nā palena o ka hana noʻeau, ka ʻepekema, ka hoʻolālā a me ka ʻenehana. Hōʻike ka hoʻolālā Guangming Public Service Hale Keʻena Aupuni i ke kūlana ʻoi kelakela i ʻoi aku ma mua o ka palena a hoʻomaikaʻi ʻole ʻole i ka honua ma o kona mau ʻano pōmaikaʻi a waiwai. He hana ka hoʻolālā Guangming Public Service Hale Keʻena Aupuni i lanakila i ka A' Design Award Palatina e hoʻāla i ka makemake, hoʻoulu, hoʻoikaika, hoʻohauʻoli a hoʻā i ka hauʻoli nui.
Ma Hope o ka Hoʻolālā
ʻEke Nūhou
Nā hōʻoia, nā lālā hui a me nā kikoʻī ʻenehana i hāʻawi ʻia e ka mea hoʻolālā.
- Nā ʻAno Kūʻokoʻa
- The designer didn't just say no to "Taishi Chair" form but took a more indirect, flexibleway. There are 2 small hills about 30m high and the plot was full of piles of earth dumped from surrounding construction sites, leaving little space for dumped earth for the project. Based on the site conditions, the designer proposed to preserve the 2 hills, whichcanreduce the excavation work while also helping form a group of green hills that extend to the Niu Mountain on the north side of the plot.
- Nā Ana a me ka Hoʻopili
- Total land area: 29,013.71 sqm
Gross floor area: 81,198.86 sqm
Floor area ratio: 2.17
Height: 53.3 m
Floors: 11 (10 above the ground and 1 underground) - Nā Lepili
- Public service platform, government building, Zhubo Design,mix use building, office spaces
- ʻEnehana Hana
- The project has following structural features:
1. The structure system uses the shear wall structure that is transformed from the combination of diagonal strut andtruss. The span reaches 42.5 m.
2. There are overhangs floor by floor above the transitional floor. The longest one is 12.6 m, supported by inclined columns.
3. The first floor above the ground has an undulating surface while at the middle of standard floors are some openings at the facade. - Pilikia Hoʻolālā
- There were three challenges confronted by the design team:
1. The span of openings at the middle part is so large that the construction is difficult.
2. The arrangement of steel beams conforms to the changes of undulating of curved roof. Thus, the drawings and construction must be accurate.
3. The curtain wall of facade adopts triangle perforated panel with an optimized size. Realizing a continuous curved surface made from triangle panels needs high-level abilities of construction and geometry optimization experience in design stage. - Noiʻi
- The solution not only solved practical problems but also responded to the low-impact development mode advocated by the District. Fortunately, the authority eventually agreed to preserve the southern hill, so that a "Taishi chair" layout featuring enclosures on three sides would be impossible for this project.
- Hoʻoulu Manaʻo
- Taishi Chair-like layout (three sides enclosed, south side open) is very common among Chinese government buildings, and was also requested in the project's design brief. Even so, the designer intended to break the conservative Taishi Chair-like spatial pattern, with a view to bringing a new image and injecting vitality into the government architecture.
- Ka Lōʻihi o ka Papahana
- 2013-2019
Shenzhen City, China - Kaʻina Hana
- Considering that the planning of Guangming Districtemphasizes a green city development mode with low impact, the designer suggested that the buildingset an example to implement the concept.
The design team divided the building into 2blocks with distinct forms at vertical level. The upper rectangular volume is office, while the lower block functions as a public service hall, whose rooftop is shaped like anundulating "mountain range".The flexible curved plane of the "mountain"creates a relaxing atmosphere. - Nā Lālā Hui
- Project directors: Feng Guochuan, Zhong Qiao, Liu Xiaoying
Executive managers: Qu Yu, Zhang Biqin, Xiong Guilin
Designers: Xu Longjie, Gong Xiaowen, Deng Hua, Zhang Meisong, Hou Lianjian, Bao Shaobin, Qu Zhenhua, Liang Fuji, Xie Bo, Lv Fang - Nā Kuleana Kiʻi
- Xia Zhi
Kākoʻo ʻIa
ʻImi ma ʻō aku o Designers.org
E ʻimi i nā huahana, nā lawelawe a me nā manawa mai kā mākou mau hoa hoʻolaha.
Hou Aku e ʻImi Ai
Nā Hoʻolālā Pili
E ʻimi i nā hoʻolālā lanakila hou mai ka māhele like, i koho ʻia ma ka waiwai.
