Continuous Plate House 2.0 Renoviranje Rezidencija – dizajner Ryumei Fujik and Yukiko Sato

Dizajn Continuous Plate House 2.0 Renoviranje Rezidencija čiji je autor Ryumei Fujik and Yukiko Sato iznimno je cijenjeni dobitnik prestižne nagrade 2020 Brončana nagrada A' Design Award u natjecateljskoj kategoriji Dizajn Unutarnjeg Prostora i Izložbi.

BroncaInterijer· 2020

Continuous Plate House 2.0 Renoviranje Rezidencija

autor/ica Ryumei Fujik and Yukiko Sato

Klijent: F.a.d.s

Dobitnik nagrade Brončana nagrada A' Design Award u kategoriji Interijer

18,545

Potvrđeni dobitnik nagrade

Provjerite status nagrade za #92851

Posjetite stranicu Pogledajte na A' Design Award Priopćenje za medije Značka nagrade

Boje

Dizajn

O dizajnu Continuous Plate House 2.0 Renoviranje Rezidencija

Ova kuća je renovirana uglavnom na prvom katu jer je 18 godina od završetka. Renoviranje je zahtijevalo da se postojeći kuhinjski dio koji se sastoji od kuhinje, kutka za doručak i spremišta za hranu preinači u prostor koji se može koristiti za različite namjene. Kako bi se odgovorilo na ovu potražnju, eliminirani su prostor za skladištenje hrane i hodnici, čime je cijeli prostor postao širok jedna prostorija, a sudoper je promijenjen iz zidnog u otočni tip, čineći ga više prostorom usredotočenim na kuhinjsku jedinicu. . Ponovno je rođena kao mirna i ugodna soba jer je prekrivena drvenom završnom obradom.

Priznanje

O nagradi Brončana nagrada A' Design Award

Continuous Plate House 2.0 Renoviranje Rezidencija je pobjednik Brončane nagrade A' Design Award, visoko prestižnog priznanja koje se dodjeljuje izvanrednim dizajnima što se odlikuju kreativnošću, domišljatošću i oštroumnošću. Brončani pobjednici izdašno su vješti i upečatljivo kreativni artefakti koji potvrđuju golemo iskustvo, maštu i snalažljivost svojih dizajnera. Očekuje se da Continuous Plate House 2.0 Renoviranje Rezidencija bude visoko cijenjen, voljen i njegovan predmet koji je izuzetno profesionalan i inovativan. Ovaj dizajn koji je osvojio Brončanu nagradu A' Design Award uključuje najbolje prakse u umjetnosti, znanosti, dizajnu i tehnologiji i izvrstan je zbog pažnje posvećene detaljima. Continuous Plate House 2.0 Renoviranje Rezidencija sjajno zadovoljava potrebe, dotiče želje, očarava osjećaje i privlači znatiželju.

Iza dizajna

Komplet za medije

Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.

Jedinstvena svojstva: The renovation required that the existing kitchen area, consisting of the kitchen, breakfast corner, and food storage, be changed to a space that can be used for various purposes, not just at breakfast. In order to respond to this demand, the food storage and corridors were eliminated, making the entire space one room wide, and the sink was changed from a wall-mounted type to an island type, making it a more space centered on the kitchen unit. It has been reborn as a calm and cozy family room.
Dimenzije i pakiranje: The size of the Kitchen area is width:3.2m by hight:2.4m by depth:7m.
Oznake: Residence Renovation, Kitchen, spruce CLT panel, Continuous Plate
Proizvodna tehnologija: The Kitchen area is covered with spruce CLT panels (made in Austria).
Dizajnerski izazov: How Break a Box-form Architecture: In the original project (Continuous Plate House 1.0), it began to think from a box form at first. Although the effective idea was not able to be found out easily, as a result of repeating whether there is any method of breaking that somehow, and trial and error, composition as if the floor, the wall, and the roof were connected continuously and bent and built one plate was obtained.
Istraživanje: Response to a Heavy Snowfall: The principal focus of the original project (Continuous Plate House 1.0) was how we should design in response to a heavy snowfall. Since there are some examples of research that snow cannot lie easily due to the influence of a wind as for a flat roof if there is even no parapet, rather, we designed by adopting such a flat roof since 1999.
Inspiracija: This house has been renovated mainly on the first floor because 18 years the completion. It is made by folding a plate, and a rectangular box made of concrete is inserted into it to support the whole. The outer surface of the box is finished with concrete cast in cedar board formwork, leaving the texture of wood even though it is concrete. In order to further strengthen the design concept at the completion, the entire inside of the box, that is, the kitchen area is covered with a wooden finish.
Trajanje projekta: This house was first built in March 2001, and the renovation was completed in August 2019 in Fukui-city, Fukui Pref. in Japan.
Članovi tima: Ryumei Fujiki
Yukiko Sato
Zasluge za fotografije: Image #1: Photographer Hiroshi Ueda
Image #2: Photographer Takeshi Taira
Image #3: Photographer Hiroshi Ueda
Image #4: Photographer Hiroshi Ueda
Image #5: Photographer Takeshi Taira