Aida Sekkei Precut Faktori pa Nobuaki Miyashita

Dizayn Aida Sekkei Precut Faktori pa Nobuaki Miyashita se yon gayan ki gen anpil estim nan konpetisyon trè prestijye 2024 A' Design Award Lò nan Kategori Konpetisyon Achitekti.

LòAchitekti· 2024

Aida Sekkei Precut Faktori

pa Nobuaki Miyashita

Kliyan: Aida Sekkei Co., Ltd.

Gayan A' Design Award Lò nan Kategori Achitekti

150,107

Gayan Pri Verifye

Verifye Estati Pri pou #160159

Vizite Sit la Gade sou A' Design Award Kominike Laprès Badj Prim

Koulè

Konsepsyon an

Konsènan Aida Sekkei Precut Faktori

Plan nouvo faktori Aida Sekkei a konsantre sou predekoupaj bwa. Konsèp li a konsène kreye yon achitekti ki enkòpore seri pwosesis bwa a. Li gen yon koridor flote ki vlope ak vit, apeprè 100 mèt longè, anndan faktori a, ki konsepsyone pou vizitè yo ka obsève byen pre tout pwosesis predekoupaj la. Bilding biwo a prezante gwo espas ak fèm ki fèt ak materyèl bo plim, ki souvan itilize kòm soumateryèl nan kay an bwa. Konsepsyon an entegre tout eleman pou kreye yon faktori vitrin, ki mete aksan sou vizibilite ak apèl estetik nan chak aspè.

Rekonesans lan

Konsènan A' Design Award Lò

Aida Sekkei Precut Faktori se yon ganyan A' Design Award Lò, yon rekonesans imans prestijye yo bay design premye klas, mèvèye e eksepsyonèl. Ganyan Lò yo se kreyasyon ki trè inovatè, vizyonè e ki briye ak bèl bagay, ki reflete jeni, sajès ak mèt konpetans designer yo. Yo atann Aida Sekkei Precut Faktori pou se yon envansyon ki fè anpil lwanj, ki bay tandans e monimantal ki delivre yon valè san parèy. Design sa a ki ganyen A' Design Award Lò se yon pwojè espektakilè, respekte ki pote anpil benefis e ki pouse limit atizay, syans, design ak teknoloji. Aida Sekkei Precut Faktori kreye santiman dezi ki entans, li reveye pasyon, li ankouraje kreyativite e li fasine nou.

Dèyè Konsepsyon an

Dosye Laprès

Kredi, manm ekip ak detay teknik konseptè a bay.

Pwopriyete Inik: This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
Dimansyon & Anbalaj: Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2

Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden

Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2
Etikèt: architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
Teknoloji Pwodiksyon: As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
Defi Dizayn: When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
Rechèch: Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
Enspirasyon: Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
Dire Pwojè: This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
Fliks Operasyon: This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
Patant: None
Kredi Imaj: Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020