철 가구 · 2021
Mira 의자
by Cemil Yavuz
- A' Design Award 철상 2021 in 가구
- CLIENT: Cemil Yavuz
- Estimated Number of Design Views: 10,498
- Verification code F9AC27EEE4 · Verify this award
Colors
About Mira 의자
미라는 식사 및 일반 좌석용으로 설계된 의자입니다. 프레임은 세 개의 원형 스테인리스 스틸 프로파일로 제작되었습니다. 두 개의 프로파일은 동일한 각도와 방향으로 구부러져 있으며, 세 번째 프로파일은 다른 방식으로 구부러져 있습니다. 패브릭으로 마감된 좌석과 등받이 표면이 프레임에 부착되어 있으며, 높이 조절이 가능한 플라스틱 다리로 의자가 완성됩니다. 미라는 가벼워서 테이블 주위에 배치하거나 단독으로 사용할 수 있습니다. 이 의자는 좌측 또는 우측으로 기울여 사용할 수 있습니다. 미라는 분해된 상태로 배송되며, 사용자는 포장을 푼 후 직접 조립할 수 있습니다.
About the A' Design Award 철상
Mira 의자, 이 작품은 A' Design Award 철상 수상작으로, 잘 디자인된 창작물에 기대되는 전문적·산업적 요건을 충족하는 좋은 디자인에 수여되는 권위 있는 인정입니다. 철상 수상작은 창작자의 뛰어난 기술, 높은 전문성, 전문가다운 이해, 창의적 역량을 보여 줍니다. Mira 의자, 이 작품은 높이 평가받고 감탄과 사랑을 받는 창작물로서 실용적이고 혁신적일 것으로 기대됩니다. 이 철상 수상 디자인은 업계 모범 사례를 통합하며 노하우와 재능으로 연결된 유능한 기술적 특성을 갖추고 있습니다. Mira 의자, 이 작품은 철저함으로 존중받으며 삶의 질을 개선하여 세상을 더 나은 곳으로 만들도록 디자인되었습니다.
Press Kit
- Unique Properties
- Mira is a chair made of three curved profiles basically. The chair's frame consists of a combination of three profiles. Two profiles bent in the same angle and direction and also one profile bents in a different way. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Dimensions & Packaging
- Width 686 mm. x Depth 533 mm. x Height 690 mm.
As it is disassembled chair, it can be put in the carton box in smaller dimensions. - Tags
- Bending, Metal Profile, Chair, Simple, Elegant
- Production Technology
- The chair's frame consists of a combination of three profiles. These are circle section stainless steel profiles. Two profiles bent in the same angle and direction, the other one bents in a different angle. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Design Challenge
- Iconic chairs designed in the historical process were examined during the design phase of the project. Based on the motto less is more, the product was aimed to have a plain appearance and also easy to produce. During the design phase, many different drawings were made for searching ideal form. While deciding on the form, it was being paid attention to angles that the machine could bend profiles during the production phase.
- Research
- As the starting point of the project, it was determined as a simple, light-looking product design that would harm natural resources as little as possible. One of the aims of the project is that it will not require too many processes as a production technique. It is designed to be lightweight and disassembled considering the shipment of the product. Users can easily install the product by taking it out of the box. With the linear differences in the form, it is aimed to be remarkable in the place where it is located.
- Inspiration
- In this design, it is aimed to reduce the extra labor force in production. The starting point of the design was to create the frame of the chair with only 2 different metal bending processes. At the same time, the product is intended to be lightweight and simple to assemble. It is not only a design that fulfills its functionality but also has a simple appearance visually.
- Project Duration
- The chair can be used in both positions, leaning left or right. Consisting of metal profiles, the product is lightweight and can be positioned around the table or singular.
- Operation Flow
- Since the product is designed as disassembled, users can take the product out of the box and install it themselves. The chair can be used in both positions, leaning left or right. The chair made of metal profiles is light and can be positioned around the table or singular. With its simple appearance and non-standard lines, it will attract attention in the place.
