Cloud 휴가용 아파트 인테리어 디자인 by Jui Min Chen is a highly esteemed winner of the very prestigious 2022 A' Design Award 철상 in 인테리어 공간 및 전시 디자인 Competition Category.

철인테리어· 2022

Cloud 휴가용 아파트 인테리어 디자인

by Jui Min Chen

Client: Muen interior Design Co.,Ltd

A' Design Award 철상 Winner in 인테리어 Category

6,435

Verified Award Winner

Verify Award Status for #117359

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About Cloud 휴가용 아파트 인테리어 디자인

클라우드(Cloud)는 대만 이란(宜蘭)에 위치한 로프트 스타일의 휴가용 아파트다. 이 디자인은 '덜어냄'의 개념을 따라, 건물의 지지 구조를 감싸는 간결한 선과 기본 색상 안에 주거 기능을 통합했다. 실내 전체 높이는 380cm이며 총 바닥 면적은 40제곱미터다. 투과성 소재와 얇은 강판 및 소나무 합판으로 제작된 부유형 계단은 시선을 확장시켜 좁은 공간에서 느껴지는 압박감을 줄여준다. 곡선 형태는 각 영역에서 시선을 실외의 녹음으로 자연스럽게 이끈다.

The Recognition

About the A' Design Award 철상

Cloud 휴가용 아파트 인테리어 디자인, 이 작품은 A' Design Award 철상 수상작으로, 잘 디자인된 창작물에 기대되는 전문적·산업적 요건을 충족하는 좋은 디자인에 수여되는 권위 있는 인정입니다. 철상 수상작은 창작자의 뛰어난 기술, 높은 전문성, 전문가다운 이해, 창의적 역량을 보여 줍니다. Cloud 휴가용 아파트 인테리어 디자인, 이 작품은 높이 평가받고 감탄과 사랑을 받는 창작물로서 실용적이고 혁신적일 것으로 기대됩니다. 이 철상 수상 디자인은 업계 모범 사례를 통합하며 노하우와 재능으로 연결된 유능한 기술적 특성을 갖추고 있습니다. Cloud 휴가용 아파트 인테리어 디자인, 이 작품은 철저함으로 존중받으며 삶의 질을 개선하여 세상을 더 나은 곳으로 만들도록 디자인되었습니다.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: This loft style vacation apartment is with the idea of subtraction. The design integrates needs and functions, and incorporates living functions into the aesthetics of the space, using simple lines and primary colors to cover the supporting structure of the building. The use of permeable building materials throughout the project extends the vision and reduces the sense of oppression in small spaces.
Dimensions & Packaging: The full height of the interior is 380 cm. The height of the lower part of the mezzanine floor is 120 cm, and the total size is 40 square meters. The height above the mezzanine floor is 163.5cm, and the size is 16.5 square meters. The balcony is about 5 square meters. The dressing room is about 3.3 square meters. The thickness of the punching plate is 3mm, the diameter of the hole is 5mm, and the spacing is 5mm.
Tags: loft, penetrating, arcs, suspended stairs, subtraction
Production Technology: A lightweight staircase made of thin steel panels and pine plywood is the visual axis of the design, and a different type of twine staircase is used to increase the penetration of the space. In addition to the reinforcement of the suspended staircase through the connection with the steel frame inside the wall, the main support comes from the steel rope wrapped with twine, and the steel lock and special bandage to connect the floor to the ceiling to strengthen the staircase support.
Design Challenge: The designer extended the skeleton from the inner edge of the wall for external support through a hole-cutting technique on the facade wall that connects the external wall of the bathroom, the staircase and the dressing room to increase the structural strength, and welded the light steel staircase to this skeleton so that the floor can achieve a sense of visual floating.
Research: Due to the limited space, the designer found that there was about 3.3 square meters of space left in the duct room above the bathroom, excluding the heat storage equipment, during the structural measurement and analysis. After detailed ergonomic measurements, a partition is opened in the wall above the bathroom, and the L-shaped floor-to-ceiling steel platform is used to strengthen the partition structure and add a simple dressing room.
Inspiration: The design motive is to create a sense of vacation in a small space, and to combine the beauty of the mountains and forests, using a curved shape to symbolize the embrace of greenery through the space. The visual guidance is achieved by using the cohesiveness of lines, which leads every space inside to the outside and creates a strong connection with outdoor nature.
Project Duration: The project started in October 2019 in and finished in January 2020 in Yilan, Taiwan.
Operation Flow: The stairs are designed with a perforated shape, allowing sunlight to penetrate through the holes, adding a rhythm of light and shadow and bringing visual interest. In order to strengthen the structure of the mezzanine, light strip is designed on the external wall of the mezzanine dressing room to link the structure between the old and new walls, so that the old and new structures can have a buffer space for deformation when the temperature changes.
Image Credits: Image #1: Mooten Studio, Cloud, 2020.
Image #2: Mooten Studio, Cloud, 2020.
Image #3: Mooten Studio, Cloud, 2020.
Image #4: Mooten Studio, Cloud, 2020.
Image #5: Mooten Studio, Cloud, 2020.