디자이너 Dorota Dyk의 작품 Medapti 경구용 약물 주사기 어댑터은(는) 매우 권위 있는 2021 A' Design Award 동상의 유아, 어린이 및 아동용 제품 디자인 부문에서 탁월한 수상작입니다.

동유아용품· 2021

Medapti 경구용 약물 주사기 어댑터

디자이너: Dorota Dyk

클라이언트: Medapti

유아용품 부문 A' Design Award 동상 수상작

18,093

인증된 수상작

#123693 수상 상태 인증하기

사이트 방문 A' Design Award에서 보기 보도 자료 수상 배지

색상

디자인

Medapti 경구용 약물 주사기 어댑터 소개

Medapti는 아기를 위한 경구용 약물 주사기 어댑터입니다. Medapti는 주사기만 사용할 때보다 액상 약물을 더 간편하게 먹일 수 있도록 해줍니다. 일체형으로 제작된 이 제품은 부드러운 마우스가드와 튜브로 구성되어 있습니다. 약물을 채운 주사기를 튜브에 밀어 넣으면, 튜브가 힘을 주지 않아도 주사기를 제자리에 고정해 줍니다. 각도가 있는 튜브는 약물이 목 안쪽이 아닌 볼 쪽으로 흐르도록 유도합니다. 마우스가드는 주사기가 입 속으로 너무 깊이 들어가는 것을 막아줍니다. Medapti는 의료용 등급의 BPA 무함유 열가소성 엘라스토머로 제작되었으며 통기구가 마련되어 있습니다.

수상 인정

A' Design Award 동상 소개

Medapti 경구용 약물 주사기 어댑터, 이 작품은 A' Design Award 동상 수상작으로, 창의성, 독창성, 영민함으로 돋보이는 뛰어난 디자인에 수여되는 높은 권위의 인정입니다. 동상 수상작은 충분히 숙련되고 인상적으로 창의적인 작품으로, 디자이너의 폭넓은 경험, 상상력, 기지를 입증합니다. Medapti 경구용 약물 주사기 어댑터, 이 작품은 높이 평가받고 감탄과 사랑을 받는 사물로서 두드러지게 전문적이고 혁신적일 것으로 기대됩니다. 이 동상 수상 디자인은 예술, 과학, 디자인, 기술의 모범 사례를 담고 있으며 세부에 대한 주의로 훌륭합니다. Medapti 경구용 약물 주사기 어댑터, 이 작품은 필요를 훌륭하게 충족하고 욕망에 닿으며 감정을 매료하고 호기심을 불러일으킵니다.

디자인 비하인드

프레스 킷

디자이너가 제공한 크레딧, 팀원 및 기술 세부 사항.

고유 특성: Administering oral medication to babies can be problematic. Medapti surpasses the current products by its simplicity and a unique design which directs the syringe to the side of the mouth. The syringe is simply inserted inside the tube which is at an angle and directs the medication to the cheek, not the back of the throat. The mouth guard helps to position the syringe and ensures the syringe does not go too far down the mouth. Softer material is gentle on the gums. Medapti was designed with safety in mind. It passes not only a choking test but a more rigorous air-obstruction safety test.
치수 및 패키징: Medapti is 6 gram in weight and has the following dimensions: 62mm x 50mm x 43mm. It comprises of a mouthguard and a tube where the syringe is inserted. The tube is designed in a way that holds the syringe in place, but no force needs to be used to push or remove it. The tube is at an angle to direct the syringe to the side of baby's mouth. Additional features include ventilation holes and a holder to pull Medapti out if it ever got stuck in the mouth (although it is unlikely to happen, the design takes this eventuality into consideration). The product is packaged in a fully recyclable cardboard box.
태그: baby product, baby essential, baby medication, baby syringe, baby medicine, baby medicine dispenser, nursery product
생산 기술: The original concept was simply created with clay and cardboard which in result led to approximately 50 design modifications and numerous rounds of 3D printed and vacuum cast prototypes to create a functional product. Safety standards had a major influence on the final shape and size. Consequently, a 2-cavity, hot runner mould made from steel has been built. Medapti units are made out of medical grade, BPA-free thermoplastic elastomer (which can be fully recycled providing there is a facility to do so).
디자인 과제: The main challenge was to pass the air-obstruction test without compromising the visual aspects of the design by making the product too large. The syringe tube design was also problematic. It was important that the syringe stays securely inside the tube without the need of using too much force to insert it. An inner "ring" was added, and various sizes and shapes were tested, until the goal was achieved. The other major challenge was no existing safety standards for such a novel product. It was resolved by talking to testing houses, safety standards specialists and health professionals.
연구: Medapti is an innovative product, therefore no standards for this product exist yet. Medapti worked closely with the safety testing companies, who advised on what standards the product should try to comply with. The main aim was to pass the air obstruction test and meet as many clauses of the EN1400 soother standard as possible. The size and shape were designed so the adapter does not fit through the air obstruction gauge. Furthermore, ventilation holes and a holder were added as additional safety features.
영감: When my children were babies, I struggled to give them medicine, especially my youngest who refused to take it. Further research showed that administering medication to babies can be a real issue, with parents worrying about babies choking on medicine and not giving a correct dose if a baby spits it out. I wanted to create a simple to use solution. Medapti concept gained interest from international media, health professionals and hospitals including Great Ormond Street, Alder Hey, Sheffield and Manchester Children Hospitals in England.
프로젝트 기간: The project started in 2013 in England. It was first publicly presented in Richard Branson's competition where it received a lot of traction and media attention. In 2018, Medapti was chosen as a BPA Concept&Innovation finalist and as a result, secured a stand at the Harrogate International Nursery Fair where prototypes were exhibited. Medapti will launch in the UK and on Amazon marketplace in April 2021. Additionally, it will be sold on a license in Poland, Scandinavia and other Eastern European countries in the second half of 2021.
운영 흐름: Dispensing medicine with the syringe alone can be problematic due to babies moving around or refusing the medication. It can be difficult to place the syringe in the mouth and the syringe can be inserted too far down the throat. Moreover, the medicine can be accidentally dispensed to the back of the throat. A hard plastic syringe can also hurt the gums. Medapti is an improvement to a syringe and makes it easier to place the syringe in baby's mouth, ensuring it does not go too far as well as helps to direct it to the cheek.
특허: Patented. GB1320255.1. Medapti Ltd. 2017. UK
Patent Pending. EP3068362A1/WO2015071476A1. Medapti Ltd. 2013. EU
Patent Pending. US2016279031A1. Medapti Ltd. 2013. USA
Trademark 017921466 (2018) Medapti Ltd.
Trademark UK00003217910 (2017) Medapti Ltd.
Trademark 79248534 (2019) Medapti Ltd.
Trademark: 1981688 (2018) Medapti Ltd.
Trademark 32979654 (2019 Medapti Ltd.
Trademark UK00003573861 (2020) Medapti Ltd.
Trademark UK00003573864 (2020) Medapti Ltd.
Design UK 6110454 (2020) Medapti Ltd.
EUIPO RCD 008173421-0001 (2020) Medapti Ltd.
이미지 출처: Image #1 : Photographer Julia Michalczewska, Medapti product photo, 2021
Image #2 : Photographer Julia Michalczewska, Medapti inside baby's mouth front, 2021
Image #3 : Photographer Julia Michalczewska, Medapti tube outside baby's mouth, 2021
Image #4 : Photographer Julia Michalczewska, Medapti inside baby's mouth top angle, 2021
Image #5 : Photographer Julia Michalczewska, Medapti how to use with syringe, 2021