Obayashi Corporation의 Oak Konan Shinagawa 오피스 빌딩

디자이너 Obayashi Corporation의 작품 Oak Konan Shinagawa 오피스 빌딩은(는) 매우 권위 있는 2023 A' Design Award 은상의 건축, 건물 및 구조물 디자인 부문에서 탁월한 수상작입니다.

은건축· 2023

Oak Konan Shinagawa 오피스 빌딩

디자이너: Obayashi Corporation

클라이언트: Obayashi-Shinseiwa Real Estate Corporation

건축 부문 A' Design Award 은상 수상작

18,291

인증된 수상작

#149620 수상 상태 인증하기

A' Design Award에서 보기 보도 자료 수상 배지

색상

디자인

Oak Konan Shinagawa 오피스 빌딩 소개

오크 고난 시나가와(Oak Konan Shinagawa)는 일본 도쿄의 항만 인근에 자리한 12층 규모의 오피스 빌딩이다. 격자 형태의 흰색 외부 프레임은 프리캐스트 콘크리트로 제작된 외피로, 구조 프레임과 차양 장치의 역할을 동시에 수행한다. 코어부의 철골 구조와 결합된 이 하이브리드 구조는 기둥이 없는 사무 공간을 구현하여 유연한 레이아웃을 가능하게 한다. 프리캐스트 기둥과 보는 외부 공장에서 생산된 후 상부에서 내려 설치되므로 현장 작업이 간소화된다. 외부 창에는 탈착식 핸들로 여닫을 수 있는 자연 환기 유닛이 적용되었다.

수상 인정

A' Design Award 은상 소개

Oak Konan Shinagawa 오피스 빌딩, 이 작품은 A' Design Award 은상 수상작으로, 최상급이며 아름답고 인상적인 디자인에 수여되는 비범하게 권위 있는 인정입니다. 은상 수상작은 대단히 뛰어나고 매우 창의적인 작품으로, 디자이너의 탁월한 전문 지식, 재능, 통찰력을 보여 줍니다. Oak Konan Shinagawa 오피스 빌딩, 이 작품은 훌륭한 대표작으로서 매우 전문적이고 깊이 있게 혁신적일 것으로 기대됩니다. 이 은상 수상 디자인은 예술, 과학, 디자인, 기술의 경계를 넓히는 데 이바지하는 주목할 만하고 찬사를 받는 발명품입니다. Oak Konan Shinagawa 오피스 빌딩, 이 작품은 모두가 부러워하는 창작물로서 욕망을 일깨우고 긍정적인 감정을 불러오며 경탄과 경이로움을 불러일으킵니다.

디자인 비하인드

프레스 킷

디자이너가 제공한 크레딧, 팀원 및 기술 세부 사항.

고유 특성: The building is a mid-rise, 12-story office building located near the harbor in Shinagawa, Tokyo.
The distinctive, white lattice-like exterior frame is an outer shell made of precast concrete serving as
structural frame as well as sun-shading device. Combined with the steel construction of the core this
hybrid structure creates a column-free office space. The fusion of structure and finishing enhances high
buildability and sustainability.
치수 및 패키징: [Site area] 2,635.57m2
[Building area] 1,485.79m2
[Total floor area] 16,331.64m2
[Number of floors] 12 floors above ground, 1 floor below ground, tower building 1st floor
[Maximum Height] 56.76m
[Structure] steel construction, reinforced concrete construction in some parts
태그: Structural Frame, Facade Design, High Added-Value, High Buildability, Equipment units, Office Interior, Tokyo
생산 기술: Supply and exhaust air for the office is provided on the east, west, north sides from equipment units (air supply
units and exhaust air units) built into the aluminum curtain wall inside the columns and beams.
By taking advantage of the depth (500mm) of the exterior shell structure and installing air intake and exhaust air
outlets on the same exterior wall surface, the amount of ductwork in the office ceiling was significantly reduced,
which also contributes to high buildability.
The deep structural frame also controls the amount of direct solar radiation and significantly reduces the heat loads.
디자인 과제: Labor shortage in the Japanese Construction Industry is a major challenge.
Although research into new technologies such as construction robots is progressing, there are still few examples of their use in actual construction sites.
One of the major themes of this project is high buildability.
We communicated with the construction staff to find a construction method that was easy to construct and of high quality.
At the same time, as architects, we had to keep creating new ideas for exterior and interior to added-value to the client.
연구: Labor shortage have recently become major challenges in the Japanese Construction Industry.
This building uses precast concrete columns and beams, which serve as both the structure and exterior finishing materials of the shell structure that characterizes the facade.The use of precast concrete elements fabricated off-site ensures high quality and accuracy.
In addition, the structural frame was designed without horizontal connection, which enables to simplify the site erection. Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
영감: Labor shortage have recently become major challenges in the Japanese Construction Industry.
Structural frame was designed without horizontal connection, which enables to simplify the site erection.
Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
The design of the interior in many areas is based on a motif of vertical and
horizontal lines and grids inspired by the facade design.
프로젝트 기간: The project started in September 2020 and finished in July 2022 in Tokyo, Japan.
운영 흐름: The column-free office space with a hybrid structure of a precast concrete outer frame and steel construction improves the flexibility of office layout and significantly enhances the convenience of users.
In addition, the exterior windows have natural ventilation window units that can be opened and closed freely by attaching a detachable handle, allowing for direct air intake.
팀원: Hiroshi Satake
Kenji Matsuoka
Rei Sato
Kazuhiro Yasufuku
이미지 출처: Image #1: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #2: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #3: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #4: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #5: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022