Continuous Plate House 2.0 주택 리모델링은 by Ryumei Fujik and Yukiko Sato

Continuous Plate House 2.0 주택 리모델링은 by Ryumei Fujik and Yukiko Sato is a highly esteemed winner of the very prestigious 2020 A' Design Award 동상 in 인테리어 공간 및 전시 디자인 Competition Category.

동인테리어· 2020

Continuous Plate House 2.0 주택 리모델링은

by Ryumei Fujik and Yukiko Sato

Client: F.a.d.s

A' Design Award 동상 Winner in 인테리어 Category

18,009

Verified Award Winner

Verify Award Status for #92851

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About Continuous Plate House 2.0 주택 리모델링은

이 집은 완공된 지 18년이 되었기 때문에 1층을 중심으로 개조되었다. 리노베이션은 주방, 조식 코너, 식품 저장고로 구성된 기존 주방 공간을 다양한 용도로 사용할 수 있는 공간으로 변경해야 했습니다. 이러한 요구에 부응하기 위해 식품창고와 복도를 없애 전체 공간을 한 방 넓이로 만들고 싱크대를 벽걸이형에서 아일랜드형으로 변경해 주방 유닛을 중심으로 좀 더 넓은 공간을 만들었다. . 원목마감으로 마감하여 차분하고 포근한 방으로 거듭났습니다.

The Recognition

About the A' Design Award 동상

Continuous Plate House 2.0 주택 리모델링은, 이 작품은 A' Design Award 동상 수상작으로, 창의성, 독창성, 영민함으로 돋보이는 뛰어난 디자인에 수여되는 높은 권위의 인정입니다. 동상 수상작은 충분히 숙련되고 인상적으로 창의적인 작품으로, 디자이너의 폭넓은 경험, 상상력, 기지를 입증합니다. Continuous Plate House 2.0 주택 리모델링은, 이 작품은 높이 평가받고 감탄과 사랑을 받는 사물로서 두드러지게 전문적이고 혁신적일 것으로 기대됩니다. 이 동상 수상 디자인은 예술, 과학, 디자인, 기술의 모범 사례를 담고 있으며 세부에 대한 주의로 훌륭합니다. Continuous Plate House 2.0 주택 리모델링은, 이 작품은 필요를 훌륭하게 충족하고 욕망에 닿으며 감정을 매료하고 호기심을 불러일으킵니다.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: The renovation required that the existing kitchen area, consisting of the kitchen, breakfast corner, and food storage, be changed to a space that can be used for various purposes, not just at breakfast. In order to respond to this demand, the food storage and corridors were eliminated, making the entire space one room wide, and the sink was changed from a wall-mounted type to an island type, making it a more space centered on the kitchen unit. It has been reborn as a calm and cozy family room.
Dimensions & Packaging: The size of the Kitchen area is width:3.2m by hight:2.4m by depth:7m.
Tags: Residence Renovation, Kitchen, spruce CLT panel, Continuous Plate
Production Technology: The Kitchen area is covered with spruce CLT panels (made in Austria).
Design Challenge: How Break a Box-form Architecture: In the original project (Continuous Plate House 1.0), it began to think from a box form at first. Although the effective idea was not able to be found out easily, as a result of repeating whether there is any method of breaking that somehow, and trial and error, composition as if the floor, the wall, and the roof were connected continuously and bent and built one plate was obtained.
Research: Response to a Heavy Snowfall: The principal focus of the original project (Continuous Plate House 1.0) was how we should design in response to a heavy snowfall. Since there are some examples of research that snow cannot lie easily due to the influence of a wind as for a flat roof if there is even no parapet, rather, we designed by adopting such a flat roof since 1999.
Inspiration: This house has been renovated mainly on the first floor because 18 years the completion. It is made by folding a plate, and a rectangular box made of concrete is inserted into it to support the whole. The outer surface of the box is finished with concrete cast in cedar board formwork, leaving the texture of wood even though it is concrete. In order to further strengthen the design concept at the completion, the entire inside of the box, that is, the kitchen area is covered with a wooden finish.
Project Duration: This house was first built in March 2001, and the renovation was completed in August 2019 in Fukui-city, Fukui Pref. in Japan.
Team Members: Ryumei Fujiki
Yukiko Sato
Image Credits: Image #1: Photographer Hiroshi Ueda
Image #2: Photographer Takeshi Taira
Image #3: Photographer Hiroshi Ueda
Image #4: Photographer Hiroshi Ueda
Image #5: Photographer Takeshi Taira