Darbs Steel U Bāra Galds, kura autors ir Joey van Beek, ir augsti novērtēts un ļoti prestižās 2022 Dzelzs balva A' Design Award ieguvējs kategorijā Tēlotājmākslas un mākslas instalāciju dizains.

DzelzsTēlotājmāksla· 2022

Steel U Bāra Galds

Autors: Joey van Beek

Klients: Industrial Office

Dzelzs balva A' Design Award ieguvējs kategorijā Tēlotājmāksla

20,781

Verificēts balvas ieguvējs

Verificēt balvas statusu dizainam #137000

Skatīt A' Design Award Preses relīze Balvas žetons

Krāsas

Dizains

Par Steel U Bāra Galds

Steel U— dizains, kura pamatā bija pagātne, radīts tagadnē un radīts ar nolūku iedvesmot nākotni. Tā rezultātā tika apvienota atkārtoti izmantota tērauda galda virsma, kas balstās uz betona kājām, kuras iznīcināja fiziskas emocijas. Tādā veidā dizains kļūst burtiski par daļu no personas, kas iznīcina betonu. Kombinācija procesa laikā radīja fiziskas un garīgas problēmas, bet galu galā radīja dizainu, kas sniedza piepildījumu.

Atzinība

Par Dzelzs balva A' Design Award

Steel U Bāra Galds ir Dzelzs balvas A' Design Award ieguvējs, prestiža atzinība, ko piešķir labiem dizainiem, kas atbilst profesionālajām un rūpnieciskajām prasībām, kādas sagaidāmas no labi izstrādātiem darbiem. Dzelzs ieguvēji parāda to radītāju lielo prasmi, augsto specializāciju, ekspertu izpratni un radošo spēju. Sagaidāms, ka Steel U Bāra Galds būs augsti vērtēts, apbrīnots un cienīts darbs, praktisks un inovatīvs. Šis ar Dzelzs balvu apbalvotais dizains integrē nozares labāko praksi un tam ir kompetentas tehniskās īpašības, kas saistītas ar zinātību un talantu. Steel U Bāra Galds tiek cienīts par rūpību un ir izstrādāts, lai uzlabotu dzīves kvalitāti un palīdzētu padarīt pasauli labāku.

Aiz dizaina

Preses materiāli

Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.

Unikālās īpašības: Steel U, is a combination of reusing emotion and scrap metal. The tabletop is made from 70mm solid reused steel which is supported by two concrete blocks. These are connected by reinforcement steel which is made into shape by forging. The shape of the block is made by the person who owns the table. The way this is done; is by pouring first a smooth concrete block in a mold, which then will destroyed by the owner with a sledgehammer and jack hammer.
Izmēri un iepakojums: Width 3220mm x Depth 650mm x Height 1120mm. Weight 988kg. Tabletop is S355 steel displayed under 10mm hardened glass. Legs are regular concrete with an inner steel shell to create an air chamber for reducing weight. Connection rods are reinforcement steel.
Birkas: Steel U, Thoughts, Emotion, Steel, Concrete, Forged, Industrial Office
Ražošanas tehnoloģija: The tabletop is made from 70mm S355 steel which was used for producing machine parts. The shapes are made by the oxygen cutting process and when no more parts could come from the plate, it became scrap metal. This was outside, which gave after 2 years in the rain and sun the current look. The reinforcement steel rods where then first forged in an arch and then welded to the tabletop. After making a steel mold, the reinforcement steel was place in the mold and then covered in regular concrete.
Dizaina izaicinājums: The hardest part was to make the concrete legs, which had to look like demolition but had to show the emotion of the owner. So I called help from my best friend, who is my father, because he had built his own house. I explained the look and strength that I wanted to have and he knew right away what was needed and how to execute. This way he thought and showed me what I needed to know so I could make the second leg myself with him as my mentor by my side checking.
Pētījums: The first research I did, was to check if I could find on the internet a furniture design that ,was or looked like it, came from a demolition. After not finding it, I started with the question on how to make the process an experience. My mind went from concrete, to create, to sculpting, to sculpture, to how to sculpt, to thoughts, to experiencing and then to emotion. This resulted in the method of the owner using emotions physically to destroying the legs first to then create.
Iedvesma: At the company which I have with my father to build conveyors, I wanted to create an office that was not about functionality, but about productivity. Inspired by my love for industrial designs I noticed the tabletop between the scrap metal, and wanted to use it because that is what you see when standing behind it. The legs got inspiration from demolition. But I wanted to put literally my emotions in to the concrete base, so I came up with the concept of pouring it first and then destroying it.
Projekta ilgums: The idea started on July 2020 in Ede, The Netherlands at my home. But because the tabletop did not yet have the right appearance I needed to wait. When it did have the appearance, it was January 2022. The legs were then made and finished on 13 February 2022 in Ede, The Netherlands at my workshop.
Darbības plūsma: The tabletop is made from scrap metal, so this way it cannot be replicated because steel and the way it is handled during production is never the same. Then the reinforcement steel to support it is there to make it look as if the concrete legs came out of a demolition. The concrete shape is not just for the demolition look, but also to make the table show the emotion of the owner. The owner will have thoughts when destroying the legs and those thought at that moment will be visible to them.