Sprout Velosipēds — JunXiang Cheng and Yi Yang

Darbs Sprout Velosipēds, kura autors ir JunXiang Cheng and Yi Yang, ir augsti novērtēts un ļoti prestižās 2022 Dzelzs balva A' Design Award ieguvējs kategorijā 3D drukāto formu un produktu dizains.

Dzelzs3D druka· 2022

Sprout Velosipēds

Autors: JunXiang Cheng and Yi Yang

Klients: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Dzelzs balva A' Design Award ieguvējs kategorijā 3D druka

31,470

Verificēts balvas ieguvējs

Verificēt balvas statusu dizainam #137286

Skatīt A' Design Award Preses relīze Balvas žetons

Krāsas

Dizains

Par Sprout Velosipēds

Sprout ir velosipēds, kas izgatavots ar trīsdimensiju druku. Rāmja forma ir veidota, izmantojot topoloģijas optimizāciju, kas materiālu izvieto tikai tur, kur tas nepieciešams, tādējādi samazinot kopējo izmantotā materiāla daudzumu. Statiskā spriegumu analīze ar galīgo elementu metodi apstiprina rāmja konstrukcijas stabilitāti. Gala modelis ir izdrukāts no augsta blīvuma neilona. Velosipēda garums ir 1630 mm, platums – 600 mm, augstums – 832 mm. Druka novērš nepieciešamību pēc dārgām veidnēm, tāpēc katrs rāmis var tikt veidots pēc individuāla dizaina.

Atzinība

Par Dzelzs balva A' Design Award

Sprout Velosipēds ir Dzelzs balvas A' Design Award ieguvējs, prestiža atzinība, ko piešķir labiem dizainiem, kas atbilst profesionālajām un rūpnieciskajām prasībām, kādas sagaidāmas no labi izstrādātiem darbiem. Dzelzs ieguvēji parāda to radītāju lielo prasmi, augsto specializāciju, ekspertu izpratni un radošo spēju. Sagaidāms, ka Sprout Velosipēds būs augsti vērtēts, apbrīnots un cienīts darbs, praktisks un inovatīvs. Šis ar Dzelzs balvu apbalvotais dizains integrē nozares labāko praksi un tam ir kompetentas tehniskās īpašības, kas saistītas ar zinātību un talantu. Sprout Velosipēds tiek cienīts par rūpību un ir izstrādāts, lai uzlabotu dzīves kvalitāti un palīdzētu padarīt pasauli labāku.

Aiz dizaina

Preses materiāli

Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.

Unikālās īpašības: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Izmēri un iepakojums: Length 1630mm, width600mm, height 832mm
Birkas: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Ražošanas tehnoloģija: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Dizaina izaicinājums: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Pētījums: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Iedvesma: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Projekta ilgums: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Darbības plūsma: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Komandas dalībnieki: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao