DefeXtiles Teknika famboarana lamba nataon'i Jack Forman

Ny endrika DefeXtiles Teknika famboarana lamba nataon'i Jack Forman dia mpandresy sarobidy amin'ny 2021 A' Design Award Volafotsy amin'ny Sokajin'ny Fifanintsanana Famolavolana Teksitila, Lamba, Endrika, Lamosina ary Lamba.

VolafotsyTeksitila· 2021

DefeXtiles Teknika famboarana lamba

nataon'i Jack Forman

Mpanjifa: Tangible Media Group, Mit Media Lab

Mpandresy A' Design Award Volafotsy amin'ny Sokajy Teksitila

54,895

Mpandresy Loka Voamarina

Hanamarina ny Sata Loka ho an'ny #109724

Tsidiho ny Tranonkala Jereo ao amin'ny A' Design Award Fanambarana ho an'ny Mpanao Gazety Marika Loka

Loko

Ny Endrika

Momba ny DefeXtiles Teknika famboarana lamba

DefeXtiles dia teknika famboarana lamba izay mamokatra lamba manify sy malefaka amin'ny fanontam-pirinty 3D mahazatra. Ny fomba fiasa dia mifehy ny fivoahan'ny akora ambany mba hamoronana sombiny kely misy kofehy madinika eo anelanelany. Ny elanelana miverimberina vokatr'izany dia manome endrika tenona, fahafahana miaina, fahalefahana ary fisintonana, na dia amin'ny akora mafy toy ny asidra polylaktika aza. Ny lamba dia atonta mitsangana amin'ny fandriana fanontam-pirinty, ka azo atao ny endrika miforitra, mihodina ary sarotra. Ny fampiharana dia ahitana akanjo, fifandraisana azo tsapain-tanana ary kilalao.

Ny Fankasitrahana

Momba ny A' Design Award Volafotsy

Nandresy ny A' Design Award Volafotsy ny famolavolana DefeXtiles Teknika famboarana lamba, fankasitrahana malaza be omena ny famolavolana ambaratonga ambony, tsara tarehy ary mahavariana. Ny mpandresy Volafotsy dia asa mamirapiratra dia mamirapiratra ary mamorona dia mamorona izay maneho ny fahaizana, ny talenta ary ny fahamaotinan-tsain'ny mpamolavola azy. Andrasana ho asa mahagaga, ohatra tsara, mahay amin'ny asa ary vaovao amin'ny halalin-tsaina ny famolavolana DefeXtiles Teknika famboarana lamba. Ity famolavolana nandresy ny A' Design Award Volafotsy ity dia fikarohana miavaka be ary ankafizina izay mahasoa ary mampandroso ny sisintanin'ny zavakanto, ny siansa, ny famolavolana ary ny teknolojia. Ny famolavolana DefeXtiles Teknika famboarana lamba dia famoronana mahazo fitaka be izay mamaly ny faniriana, mitondra fihetseham-po tsara ary mamelona fahagagana sy fahatalanjonana.

Ao Ambadiky ny Endrika

Fitaovana ho an'ny Mpanao Gazety

Fankasitrahana, mpikambana ao amin'ny ekipa ary antsipiriany teknika nomen'ny mpanao endrika.

Toetra Manokana: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
Marika: textile, 3d print, lace, advanced manufacturing, fabric
Teknolojia Famokarana: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
Fanamby Endrika: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
Fikarohana: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
Aingam-panahy: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
Faharetan'ny Tetikasa: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
Fizotr'asa: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
Mpikambana ao amin'ny Ekipa: Jack Forman
Mustafa Doga Dogan
Hamilton Foryseth
Hiroshi Ishii