Aida Sekkei Precut Pabrik dek Nobuaki Miyashita

Aida Sekkei Precut Pabrik dek Nobuaki Miyashita adolah pamenang nan sangaik tahormat dari A' Design Award Ameh 2024 nan sangaik prestigius dalam Kategori Kompetisi Arsitektur.

AmehArsitektur· 2024

Aida Sekkei Precut Pabrik

dek Nobuaki Miyashita

Klien: Aida Sekkei Co., Ltd.

Pamenang A' Design Award Ameh dalam Kategori Arsitektur

150,107

Pamenang Pangharogaan Taverifikasi

Verifikasi Status Pangharogaan untuak #160159

Kunjungi Situs Caliak di A' Design Award Siaran Pers Lencana Penghargaan

Warno

Desain

Tantang Aida Sekkei Precut Pabrik

Rancangan pabrik baru Aida Sekkei fokus pado prapotong kayu. Konsepnyo adolah manciptoan arsitektur nan manampaikan rangkaian proses pangolahan kayu. Tarmasuak di dalamnyo ado lorong jalan batutupan kaco nan maambang, panjang labiah kurang 100 meter di dalam pabrik, dirancang untuak pangunjuang dapek mancaliak langsuang saluruah proses prapotong. Bangunan kantua baruang lueh jo rangko ateh dari bahan feather edge, nan biasonyo digunoan sabagai bahan tambahan dalam rumah kayu. Rancangan ko mangintegrasi sadonyo elemen untuak manciptoan pabrik patunjuak, manakankan pado keterlihatan dan dayo tarik estetik di satiok aspek.

Pangakuan

Tantang A' Design Award Ameh

Aida Sekkei Precut Pabrik adolah pamenang A' Design Award Ameh, sabuah pangakuan nan sangaik bapresti nan dibarikan ka rancangan kelas partamo, mangaguikan jo cumelang. Pamenang Ameh adolah ciptaan nan sangaik inovatif, bapandangan jauah jo baka-kilauan mamikaik nan mancaminkan bakaik, kabijaksanaan jo kahebatan parancangnyo. Aida Sekkei Precut Pabrik dipaokan manjadi panemuan nan sangaik dipuji, panetap kacenderungan jo monumental nan mambari nilai nan alun pernah ado. Rancangan nan manang Ameh iko adolah proyek nan mangaguikan jo dihargai nan maluaskan batas seni, ilimu, rancangan jo teknologi. Aida Sekkei Precut Pabrik malahiakan karinduan nan kuek, mambangkikkan gairah, mandorong kreativitas jo mamikaik kito.

Di Baliak Desain

Kit Pers

Kredit, anggota tim jo rincian teknis nan disadioan dek perancang.

Sifat Unik: This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
Dimensi & Kemasan: Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2

Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden

Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2
Tag: architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
Teknologi Produksi: As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
Tantangan Desain: When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
Penelitian: Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
Inspirasi: Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
Durasi Proyek: This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
Alua Operasi: This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
Paten: None
Kredit Gambar: Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020