Sprout Basikal oleh JunXiang Cheng and Yi Yang

Reka bentuk Sprout Basikal oleh JunXiang Cheng and Yi Yang ialah pemenang yang sangat dihormati bagi 2022 A' Design Award Besi yang amat berprestij dalam Kategori Pertandingan Reka Bentuk Bentuk dan Produk Cetakan 3D.

BesiCetakan 3D· 2022

Sprout Basikal

oleh JunXiang Cheng and Yi Yang

Klien: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Pemenang A' Design Award Besi dalam Kategori Cetakan 3D

31,470

Pemenang Anugerah Yang Disahkan

Sahkan Status Anugerah untuk #137286

Lihat di A' Design Award Siaran Akhbar Lencana Anugerah

Warna

Reka Bentuk

Mengenai Sprout Basikal

Sprout ialah sebuah basikal yang dihasilkan melalui pencetakan tiga dimensi. Rangka basikal ini dibentuk melalui pengoptimuman topologi, yang meletakkan bahan hanya di tempat yang diperlukan dan mengurangkan jumlah bahan yang digunakan. Analisis tegasan statik menggunakan kaedah unsur terhingga mengesahkan kestabilan struktur rangka tersebut. Model akhir dicetak menggunakan nilon berketumpatan tinggi. Basikal ini berukuran 1630 mm panjang, 600 mm lebar dan 832 mm tinggi. Pencetakan menghapuskan keperluan untuk acuan yang mahal, membolehkan setiap rangka mengikut reka bentuk yang tersendiri.

Pengiktirafan

Mengenai A' Design Award Besi

Sprout Basikal ialah pemenang A' Design Award Besi, pengiktirafan yang berprestij yang dianugerahkan kepada reka bentuk yang baik yang memenuhi keperluan profesional dan industri yang dijangka daripada ciptaan yang direka dengan baik. Pemenang Besi menunjukkan kemahiran yang besar, kepakaran yang tinggi, kefahaman pakar dan keupayaan kreatif penciptanya. Sprout Basikal diharapkan menjadi ciptaan yang sangat dihargai, dikagumi dan disayangi yang praktikal dan inovatif. Reka bentuk pemenang A' Design Award Besi ini menyepadukan amalan terbaik industri dan mempunyai ciri teknikal yang kompeten yang dikaitkan dengan kepakaran dan bakat. Sprout Basikal dihormati kerana ketelitiannya dan direka untuk memberikan peningkatan kualiti hidup yang membantu menjadikan dunia tempat yang lebih baik.

Di Sebalik Reka Bentuk

Kit Akhbar

Kredit, ahli pasukan dan butiran teknikal yang disediakan oleh pereka.

Ciri-Ciri Unik: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Dimensi & Pembungkusan: Length 1630mm, width600mm, height 832mm
Tag: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Teknologi Pengeluaran: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Cabaran Reka Bentuk: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Penyelidikan: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Inspirasi: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Tempoh Projek: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Aliran Operasi: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Ahli Pasukan: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao