Hydrospine Atlanpaconiztli ietiquiz ītēchcopa Ludovic Lahccen and Raoul Morel

Tlanāhuatīlli Hydrospine Atlanpaconiztli ietiquiz ītēchcopa Ludovic Lahccen and Raoul Morel cē cencā mahuizzō tēmacēhualōni īpan huēyi 2023 Mahuizolli A' Design Award Iztacteocuitlatl īpan Ollamaliztli Tlachihualli, Chicahualiztequitilli ihuan Ahuiltiliztli Tequitilli Tlachihchihualiztli Nēhuilīztli Tlamantli.

IztacteocuitlatlOllamaliztli Tlachihualli· 2023

Hydrospine Atlanpaconiztli ietiquiz

īpal Ludovic Lahccen and Raoul Morel

Tlanāhuatīlli: Apnea Sub

Mahuizolli A' Design Award Iztacteocuitlatl Tēmacēhualōni īpan Ollamaliztli Tlachihualli Tlamantli

755,954

Tlaneltīlīlli Tēmacēhualōni

Xictlaneltilia Tēmacēhualli ītēchcopa #148412

Xiquitta Tlahcuilōlcalli Xiquitta A' Design Award ītechcopa Āmatl Tēmachiyōtīliztli Tlamachiōtl

Tlapalli

Tlanēxtilistli

Ītechcopa Hydrospine Atlanpaconiztli ietiquiz

Cuitlapan etiquiz nepan atlanpaconiztli, tech palehuia cenca chicahuac tlapopohualiztli ihuan atonahuiztli. Inelhuayoca, huel nepapan ihuan ixquich moquetzaz, oc chicuacen kilogramo, huel mochihhuaz nepapan cahuiz, mochi atlanpaconi nemiliztli. Quipia ixquich tlapoztequiliztli ihuan tlacomonaliztli tech nepapan hueyiliztli, aquihqueh cihuatl nozo oquichtli, tech maca ahmo cualli yehyecoa in amochtia in etiquiztli. Itlachihualiztli mopitza itech atlan yolcameh ihuan nepapan tlachihchihualiztli tech chicahuac yahuitl, tech quixtia huel cualli atlan nehnemi. Inepapannemilizyotl quichihua ce zan ceyoc tlamaniliztli.

Tēixīmachōtiliztli

Ītechcopa Mahuizolli A' Design Award Iztacteocuitlatl

Hydrospine Atlanpaconiztli ietiquiz ca in quicuic in Mahuizolli A' Design Award Iztacteocuitlatl, hueyi tlamahuizoliztli tlen momaca in huel yectli, tlanextic ihuan mahuiztic tlachihualli. In quicuicah Iztacteocuitlatl ca cenca cualli ihuan cenca yancuic tlachihualli in quinextia in tlamatiliztli, toltecayotl ihuan ixtlamatiliztli intlachihuanime. Ca quinequi in Hydrospine Atlanpaconiztli ietiquiz ca cenca cualli, cenca motequiuhtia ihuan yancuic. Ni dizayno in quicuic Iztacteocuitlatl quihuelitia in toltecayotl, tlamatiliztli, dizayno ihuan teknolohia. Hydrospine Atlanpaconiztli ietiquiz quiyolchicahua in tlacah, quipaquiltia ihuan quitlamahuiztiltia.

Tlanēxtilistli Ītēixpan

Āmatl Tlanextīliztli

Tlapōhualli, tēquitqueh īwan tēchmachilīztli ōquinmaca in tlanēxtīlīlli.

Cē Zan Ītēchcopa: It is the only dorsal ballast of this type that can support up to six kilos, the leads distribution in the container which can be quickly and easily modulated. Its assets are, its modularity, its comfort which you forget the weight transported, its hydrodynamic look for an optimal glide. Its safety with its quick release buckle. It can be used in all freediving activities and in all positions. It is undoubtedly the most advanced system to date allowing for ultra-precise buoyancy and neutrality.
Huēyiliztli īhuān Tlacualtepēhualli: Storage shell 150mm x 45mm x 370mm
Lead 105mm x 7,5mm x 40mm
Tōcāitl: Freediving, apnea, dive, diving, weight, spine, hydrodynamic, lestage, weighting, sport
Tlachīhualiztli Māchiyōtl: The materials used are all waterproof, easy to source and inexpensive (elastic and polypropylene straps, plastic buckles, textiles and lead). The shell is made of thermoformed textile with a zipped side opening. The internal structure has slots to fix the leads like a spine and accordion ribs to follow all movements. The leads were designed from a single template, to limit the molds and keep a hydrodynamic structure. Thus covering 98% of user needs. The rear nozzle allows air to escape.
Tlanāhuatīlli Nētēcahuilīztli: Many factors need to be taken into account and it has not always been easy for some team members to understand them. A freediving session was necessary to measure the problem. The biggest difficulty was the development of the harness, because it was difficult to hold 6 kg on the back and at the same time not prevent the rib cage from inflating, to be safe with a quick release and to be homologated in competition, to adapt to different morphologies. This required extensive structural and material testing.
Tlatēmōliztli: Before launching, we inventoried all the solutions available on the market and surveyed a panel of a hundred freedivers.
Next, we listed all the desired requirements for the product, assigning them a degree of importance. As well as the impacts that will occur on the different use cases. We quickly agree to test each hypothesis by prototyping it summarily. It was a principle rich in lessons allowing us to see the gap between the idea and reality while showing what needs to be corrected.
Tēyōllālīliztli: The concept was born out of not having enough practical and comfortable weight. As we would like a different approach, we did not have an established reference. We let our imagination free by relying on other areas. For the design of the shapes, we were inspired by sea animals as well as machines created for speed. Hydrodynamics also influenced the structure. Forcing us to review the structure to keep the modular aspect, and that it can remain flexible to follow the different body movements.
Tēquitl Cāhuitl: The project started solo in August 2019 in Lille, France. Then continued with the Transalley incubator in Valenciennes, France, from September 2020 to September 2022. Then solo again, with the collaboration of Raoul Morel as product designer.
Tēquitl Ōhuitl: The equipment is carried like a backpack. The buckle at the front allows the straps to be adjusted according to size and to instantly release the weight with one hand by simple pressure.
The envelope containing the leads has reception racks to hold the pellets in place which are sandwiched with the upper part of the cover so that they cannot move. Leads can be placed in any order for extremely precise balancing.
Patentēmeh: Patent application FR2111503 filed on October 28, 2021. Transformed into a Certificate of Utility on September 07, 2022. Title: Diving equipment for freediver, Possessor: Ludovic Lahccen
Calpolli Tlācah: Creative Designer and Art Director: Ludovic Lahccen
Product Designer: Raoul Morel
Technical and Mechanical Engineer: Steven Pingon
Engineer and technical design office: Charles Pionchon
Tech Designer and prototypes: Alan Philippart
Plastics processing and 3D printing: Olivier Paul
Textile prototypes: Christiane Lefebvre
Īxiptla Tlanēxtīlli: Main image is Image #1 Raoul Morel
Optional Image #1 Raoul Morel
Optional Image #2 Raoul Morel
Optional Image #3 Raoul Morel
Optional Image #4 Raoul Morel