DefeXtiles د نسجي جوړونې تخنیک by Jack Forman

DefeXtiles د نسجي جوړونې تخنیک by Jack Forman is a highly esteemed winner of the very prestigious 2021 د برونز A' Design Award جایزه in دری‌اړخیز چاپ شویو شکلونو او محصولاتو ډیزاین Competition Category.

برونزدری‌اړخیز چاپ· 2021

DefeXtiles د نسجي جوړونې تخنیک

by Jack Forman

Client: Tangible Media Group, MIT Media Lab

د برونز A' Design Award جایزه Winner in دری‌اړخیز چاپ Category

33,223
Verified Award Winner
Verify Award Status for #112633

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About DefeXtiles د نسجي جوړونې تخنیک

DefeXtiles یو تخنیک دی چې د معیاري ۳D پرینټرونو په مرسته نری، انعطاف منونکي نسجي موادو د تولید لپاره کارول کیږي. دا میتود د کم-اخراج (under-extrusion) کنټرول کوي، څو وړوکي ټوټې (globs) د نریو تارونو تر منځ رامنځته شي. پایله کې رامنځته شوي دوراني تشې چاپ شوي پارچې ته د نسجي مواد ډول ښکاره والی، تنفس وړتیا، انعطاف او غزیدنه ورکوي، حتی که سخت مواد لکه پولي لیکټیک اسید (PLA) وکارول شي. دا نسجي مواد د چاپ سطحې سره عمود چاپ کیږي، نو د پته او ګنډل شویو (pleated) او منحني بڼو جوړول ممکن دي. کاروړني یې جامې، محسوس کیدونکي انټرفیسونه (tangible interfaces) او د بیډمینټن شټلکاکونه شامل دي. رسانوونکی فیلامنټ کولی شي د بریښنایی سرکټونو لارې د پارچې دننه ځای پر ځای کړي.

The Recognition

About the د برونز A' Design Award جایزه

DefeXtiles د نسجي جوړونې تخنیک د برونز A' Design Award جایزې ګټونکی دی، یوه ډېره ویاړلې پېژندنه چې غوره ډیزاینونو ته ورکول کېږي چې په خلاقیت، هوښیارۍ او زیرکتیا ځانګړي دي. د برونز ګټونکي ډېر ماهر او په حیرانوونکي ډول خلاقي آثار دي چې د خپلو ډیزاینرانو پراخ تجربه، تخیل او چارواکتیا تاییدوي. له DefeXtiles د نسجي جوړونې تخنیک څخه تمه کېږي چې یو ډېر ارزښتناک، ستایل شوی او ګران شی وي چې په پام وړ ډول مسلکي او نوښتګر دی. دا د برونز A' Design Award جایزې ګټونکی ډیزاین په هنر، ساینس، ډیزاین او ټیکنالوژۍ کې غوره کړنلارې یو ځای کوي او د جزیاتو ته د پاملرنې له امله غوره دی. DefeXtiles د نسجي جوړونې تخنیک اړتیاوې په ښکلي ډول پوره کوي، هیلو ته رسېږي، احساسات ځانته ملګري کوي او لیوالتیا راپاروي.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
Tags: textile, 3d print, lace, advanced manufacturing, fabric
Production Technology: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
Design Challenge: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
Research: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
Inspiration: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
Project Duration: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
Operation Flow: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
Team Members: Jack Forman, Mustafa Doga Dogan, Hamilton Foryseth and Hiroshi Ishii