Edvard Glazebrook nisqap Arch Tiyana, Wasa illa Tiyana diseñon

Edvard Glazebrook nisqap Arch Tiyana, Wasa illa Tiyana diseñonqa Tiyarina Kamay Atipanakuy T'aqapi 2021 A' Design Award Burunsi Premiu nisqap ancha chaniyuq atipaqninmi.

BurunsiTiyarina· 2021

Arch Tiyana, Wasa illa Tiyana

Edvard Glazebrook rurasqa

Tiyarina T'aqapi A' Design Award Burunsi Premiu Atipaq

11,029

Taripasqa Premio Atipaq

#106853 nisqapaq Premio Kayninta Taripay

A' Design Award ukhupi Qhaway Prensa Willakuy Premio Unanchay

Llinphikuna

Diseñomanta

Arch Tiyana, Wasa illa Tiyana nisqamanta

Arch nisqaqa huk tiyanam, huk wasa illa tiyanapiwan, laminasqa pino kurumanta ruwasqa, kichkasqa hinaspa yana tinturawan llampʼuchasqa. Kay dizaynuqa aslla hinaspa kutin-kutin formakunapi hinaspa figurakunapi sayarin, chaymi muyublekunaman huk kaq hinaspa yuyaysapa rikchʼayta qun. Pichqa kaq waqta arkukuna tiyanapa chakinkunata hinaspa wasa illayta ruwan, ichaqa wasa illa tiyanaqa kimsa chawpi arkukunamanta ruwasqam, chawpipi tupanku. Llapan partekunaqa laminasqa kuru platamanta CNC router nisqawan kuchusqa, chaymantataq wakichiywan hinaspa kuru clavokunawan hukllachasqa. Kurvakunaqa muyublekunata pisi kallpayoq kaq kaqkunapi sinchiyachin.

Riqsichiy

A' Design Award Burunsi Premiu nisqamanta

Arch Tiyana, Wasa illa Tiyana A' Design Award Burunsi Premiu mishak kan, jatun yupaychay, kayta mana shuk shina, mushuk yuyaypi, yuyaypi shinallatak chaskik kaypi riksishka diseñukunaman kun. Burunsi mishak kashkakunaka ruray ushayta charik shinallatak mancharina mushuk rurashkakunami, paykunata rurakkunapak achka yachayta, yuyayta shinallatak ruray ushayta rikuchinku. Arch Tiyana, Wasa illa Tiyana sinchi yupaychashka, kuyashka shinallatak riksishka shuk ruray kanata munanku, ruray yuyaywan shinallatak mushuk yuyaywan. Kay Burunsi Premiu japishka diseñuka arti, siensia, diseñu shinallatak tekinolojíapi ashtawan alli ruraykunata tantachin shinallatak ima ukumanta rikuypi sumak kan. Arch Tiyana, Wasa illa Tiyana mañaykunata alli paktachin, munaykunata llankan, shunkuta kuyachin shinallatak yachayta munayta kallarichin.

Diseño Qhipanpi

Prensa Kit

Diseñadorpa quska créditos, llamk'aq runakunapas técnico willaykuna.

Sapaq Kayninkunamanta: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Tupukuna & P'istuy: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Etiquetakuna: Wood, Chair, Stool, Pine wood, Arches, Curve
Ruway Tecnología: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Diseño Sasachakuy: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
T'aqwiy: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Kallpachay: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Llamk'ay Pacha: The project started in march 2020 - and finished in late May 2020.
Purichiy Puriy: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Patentekuna: Copyrights belong to Edvard Glazebrook, 2020
Huñu Runakuna: Edvard Glazebrook