Huajie Sun ᱨᱮᱱᱟᱜ Simple Assembly ᱯᱚᱥᱴᱚᱨ ᱯᱷᱨᱮᱢ

Huajie Sun ᱨᱮᱱᱟᱜ Simple Assembly ᱯᱚᱥᱴᱚᱨ ᱯᱷᱨᱮᱢ ᱫᱚ ᱫᱟᱯᱛᱟᱨ ᱯᱷᱟᱨᱱᱤᱪᱟᱨ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2021 A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾

ᱞᱚᱦᱟᱫᱟᱯᱛᱟᱨ ᱯᱷᱟᱨᱱᱤᱪᱟᱨ· 2021

Simple Assembly ᱯᱚᱥᱴᱚᱨ ᱯᱷᱨᱮᱢ

Huajie Sun ᱞᱮᱠᱟᱛᱮ

ᱜᱟᱦᱟᱠ: Yuan TA

ᱫᱟᱯᱛᱟᱨ ᱯᱷᱟᱨᱱᱤᱪᱟᱨ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ

18,872

ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ

#107184 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪ

A' Design Award ᱨᱮ ᱧᱮᱞ ᱢᱮ ᱯᱨᱮᱥ ᱨᱤᱞᱤᱡ ᱯᱩᱨᱥᱠᱟᱨ ᱵᱮᱡ

ᱨᱚᱝ

ᱰᱤᱡᱟᱭᱤᱱ

Simple Assembly ᱯᱚᱥᱴᱚᱨ ᱯᱷᱨᱮᱢ ᱵᱟᱵᱚᱛ ᱛᱮ

ᱥᱚᱨᱚᱞ ᱡᱚᱲᱟ�ископ ᱠᱟᱱᱟ ᱢᱚᱰᱩᱞᱟᱨ ᱰᱤᱥᱯᱞᱮ ᱨᱮᱠ ᱡᱟᱦᱟᱱ ᱯᱚᱥᱴᱚᱨ ᱠᱚ ᱞᱟᱹᱜᱤᱛ ᱦᱩᱭ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ ᱾ ᱱᱚᱶᱟ ᱥᱤᱥᱴᱟᱢ ᱨᱮ ᱯᱩᱱ ᱨᱠᱚᱢ ᱮᱞᱩᱢᱤᱱᱤᱭᱟᱢ ᱮᱞᱚᱭ ᱯᱷᱨᱮᱢ ᱨᱚᱰ ᱟᱨ ᱯᱮ ᱨᱠᱚᱢ ᱮᱠᱥᱮᱥᱚᱨᱤ ᱵᱮᱵᱷᱟᱨ ᱦᱩᱭ ᱦᱩᱭᱩᱜᱼᱟ ᱾ ᱢᱤᱫ ᱢᱤᱫ ᱨᱚᱰ ᱨᱮ ᱢᱤᱫ ᱠᱚᱸᱠᱮᱭᱟᱢ ᱟᱨ ᱠᱚᱱᱵᱷᱮᱠᱥ ᱡᱚᱲᱚᱬ ᱢᱮᱱᱟᱜᱼᱟ, ᱢᱤᱫ ᱠᱚᱴᱷᱟᱨᱮ ᱢᱮᱜᱱᱮᱴ ᱟᱨ ᱮᱴᱟᱜ ᱠᱚᱴᱷᱟᱨᱮ ᱢᱮᱴᱮᱞ ᱢᱮᱱᱟᱜ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱞᱟᱹᱜᱤᱛ ᱛᱮ ᱨᱚᱰ ᱠᱚ ᱥᱚᱡᱷᱟ ᱟᱨ ᱮᱞ-ᱟᱠᱟᱨ ᱨᱮ ᱡᱚᱲᱟᱣ ᱫᱟᱲᱮᱭᱟᱜᱼᱟ ᱾ ᱨᱟᱵᱟᱨ ᱠᱚᱱᱮᱠᱴᱚᱨ ᱠᱚ ᱯᱮ ᱴᱟᱠᱟ ᱜᱚᱴᱟ ᱨᱚᱰ ᱡᱚᱲᱟᱣᱟᱭ ᱢᱮᱱᱟᱜᱼᱟ, ᱟᱨ ᱠᱞᱮᱢᱯ ᱠᱚ ᱯᱚᱥᱴᱚᱨ ᱠᱚ ᱴᱷᱤᱠ ᱴᱷᱟᱶ ᱨᱮ ᱠᱚᱸᱜᱟᱲ ᱫᱚᱦᱚ ᱦᱚᱪᱚ ᱠᱟᱱᱟᱭ ᱾ ᱭᱩ-ᱟᱠᱟᱨ ᱞᱠ ᱮᱠᱟ ᱨᱮᱠ ᱦᱚᱸ ᱞᱟᱢᱯ ᱯᱚᱥᱴ ᱨᱮ ᱰᱷᱮᱞ ᱫᱚᱦᱚᱭᱟ ᱾ ᱢᱤᱫ ᱥᱮᱴ ᱠᱚ ᱦᱩᱲᱩᱲ ᱯᱚᱥᱴᱚᱨ ᱟᱨᱵᱟᱝ ᱢᱟᱰᱷᱮᱭᱟᱢ ᱜᱟᱦᱤᱨ ᱚᱰᱚᱠ ᱞᱟᱹᱜᱤᱛ ᱛᱟᱲᱟᱣ ᱫᱟᱲᱮᱭᱟᱜᱼᱟ, ᱚᱱᱟ ᱛᱮ ᱠᱚᱢ ᱯᱷᱨᱮᱢ ᱠᱚ ᱵᱮᱵᱷᱟᱨ ᱵᱟᱝ ᱠᱟᱱ ᱛᱟᱦᱮᱸ ᱟᱠᱟᱱᱟ ᱾

ᱢᱟᱱᱟᱱ

A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ

Simple Assembly ᱯᱚᱥᱴᱚᱨ ᱯᱷᱨᱮᱢ ᱫᱚ A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱵᱷᱟᱞᱟᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ Simple Assembly ᱯᱚᱥᱴᱚᱨ ᱯᱷᱨᱮᱢ ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾

ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ

ᱯᱨᱮᱥ ᱠᱤᱴ

ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾

ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ: The general display stand is designed as a modular display stand. Users can assemble and fix the display stand by means of magnetic absorption and rubber interference matching with four frame rods of different sizes and three accessories. It solves the problem that a single exhibition frame only supports posters of specific size on the market, and when users prepare posters of various sizes, some exhibition frames may be left idle and wasted, and the installation process is complicated, exhibition walls need professional installation and so on. The design can not only meet the requirements of conventional floor display racks, but also be used for the construction of small and medium-sized exhibition walls. At the same time, it is equipped with u-lock structure, so users can quickly fix the exhibition frame on lamppost and other products for the construction of posters or publicity plates. This design brings the user an efficient and convenient new assembly experience.
ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ: This modular display frame has four sizes of frame rods, namely 15mm x 570mm; 15 mm x 620 mm; 15 mm x 950 mm; 15mm x 1020mm. Users can select the frame rod of the poster to be displayed according to their needs and build the exhibition frame. Through model verification, this design can be assembled into a small exhibition frame supporting the common poster size (1000mmx600mm) at the minimum, and a large exhibition frame supporting the common poster size (4000mmx4000mm) at the maximum.
ᱴᱮᱜ ᱠᱚ: Fast, Modular, Economical, demand
ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ: Connector:RubberMaterial, can choose the number of inserted steel pipe according to the demand, can connect up to three steel pipes.
SlipBall：RubberMaterial,InstalledAt the bottom,To prevent direct contact with the ground,ReductionFriction,Maintain the stability of the frame.
(Rack) Clamp: The upper part is made of plastic and the lower part is made of silica gelTo connect with the display frame, easy to fix the poster quickly.
U-shaped lock structure: Metal oxide is used for the material to prevent damage and be more durable. The display rack can be fixed on the lamp post and other temporary displays.
Aluminum alloy spray paint display rack stick: External spray paint to prevent oxidation, choose lighter aluminum alloy.
Frame rod: Both ends have a concave-convex tenon-and-mortar structure, one end is a magnet and the other end is a metal, which can be attracted to each other and assembled in a vertical or L shape. It is used for the basic construction of the framework.
ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ: In the preliminary investigation of this design, in addition to the online and offline information collection, the fishbone analysis method is also used for research and analysis, and several main reasons for the low utilization rate of the display frame are analyzed, such as inconvenient handling, single size type of support, disassembling vulnerable hands and so on...
ᱜᱚᱵᱮᱥᱚᱱᱟ: 1. There are many kinds of display racks, but they can only be displayed for posters of specific size, and cannot be adjusted, resulting in serious waste.
2. The installation steps of the display stand are tedious and the installation time is long. In addition, sometimes the hand-stretched hooks will cause scratches, and there is a certain risk.
3. Large exhibition stand has many connecting parts and complex assembling methods, which
ᱯᱨᱮᱨᱚᱱᱟ: How to improve the utilization rate of exhibition racks by purchasing a set of exhibition racks that can be combined into various sizes? Finally, I came up with the design and assembly of childhood toys, Lego and snowflake inserts. Finally, through model verification, I decided to use snowflake, which is more simple and ingenious in form and can be fixed and assembled only on concave and convex sides.
ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ: The project started in March 2020 in CHONGQING and finished in June 2020 in CHONGQING, the model is on display at the Luo Zhongli Art Museum in Chongqing in June 2020.
ᱠᱟᱹᱢᱤ ᱦᱚᱨ: According to the size of the poster, select accessories. Assemble the frame by magnetic suction. Connect the support by rubber interference fit
This exhibition frame is more convenient and fast to carry, just select the required number of pipes and accessories to carry. In terms of use, it is out of the way of using the original exhibition rack. There is no need to worry about the mismatch between the size of the exhibition rack and the size of the poster.
ᱴᱤᱢ ᱥᱮᱫᱟᱭ ᱠᱚ: Huajie Sun