Swiss Crossgear Co., Limited ᱨᱮᱱᱟᱜ Swisbaby Bhar Kom Reak' Ol Sagai Jhola ᱫᱚ ᱮᱠᱥᱮᱥᱚᱨᱤ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2024 A' Design Award ᱠᱟᱥᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾
ᱠᱟᱥᱟᱮᱠᱥᱮᱥᱚᱨᱤ· 2024
Swisbaby Bhar Kom Reak' Ol Sagai Jhola
Swiss Crossgear Co., Limited ᱞᱮᱠᱟᱛᱮ
ᱜᱟᱦᱟᱠ: Swiss Crossgear Co., Limited
ᱮᱠᱥᱮᱥᱚᱨᱤ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱠᱟᱥᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ
ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ
#148899 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪᱰᱤᱡᱟᱭᱤᱱ
Swisbaby Bhar Kom Reak' Ol Sagai Jhola ᱵᱟᱵᱚᱛ ᱛᱮ
Swisbaby bakhra 10 seter 15 serma jahan gidra hormo ge nagam le ol sagai jhola bahal akana. Noa pithi jhola ye suraksha marsal bonga ar bhar kom reak' bidhi ge ektha akata. Sameyet re ekta sida LED patti ar barea disom re alo hoyo patti tahen kate, jhola sadhom koenta 100 mitar sanam khon nel akadea. Lastik joreao patti do bhar do bar kandra re bata akata. Pithi kusion re bhag bhag lekha aded bidhi ar ekta khali sirbon rasta menaktae, jaha ko sirbon do apnar bhangi re thir tahen ka dohorao. Bahre khol ar bhitri lining do polyester sang dak' rokha coating sang bonga akana.
ᱢᱟᱱᱟᱱ
A' Design Award ᱠᱟᱥᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ
Swisbaby Bhar Kom Reak' Ol Sagai Jhola ᱫᱚ A' Design Award ᱠᱟᱥᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱱᱟᱣᱟ ᱵᱷᱟᱵᱱᱟ ᱛᱮ ᱵᱷᱟᱞᱟᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ Swisbaby Bhar Kom Reak' Ol Sagai Jhola ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾
ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ
ᱯᱨᱮᱥ ᱠᱤᱴ
ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾
- ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ
- SWISBABY Weight Loss Spine Support Schoolbag is a backpack designed for teenagers aged 10-15. Compared with other similar backpacks, it is designed with excellent safety and weight loss support system. The vertical LED bar on the front side and reflective straps on both sides are use cooperatively to make the it visible even from a distance 100 m. Dynamic suspension straps spread the weight loading on both shoulders. The back cushion features a zoned support and a hollow spine support design to evenly unloading, so that the spines of teenagers are protected.
- ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ
- 450mmx280mmx15mm
- ᱴᱮᱜ ᱠᱚ
- Backpack, Student, Weight Reduction, Health, Safety
- ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ
- The exterior part of the backpack is crafted from polyester with a water-resistant coating to provide waterproofing feature. The lining is made of polyester, also with a waterproof coating. The high elastic suspension belt is constructed from high elastic fibers that are woven and sewn. The back cushion material is crafted from foamed polyethylene (PE) and the light strip is illuminated by LED.
- ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ
- In the design stage, it was challenging to identify an appropriate measure of elasticity of the elastic fibers and select a suitable high elastic material. The designer has to consider a proper extent of weight load on back that keeps the suspension device reasonably reducing weight under normal condition and yields an appropriate level of elasticity depending on specific loads, and the material used should be elastic and durable enough to mitigate the impacts of loads, but not too elastic, failing which the backpack may be unstable.
- ᱜᱚᱵᱮᱥᱚᱱᱟ
- As medical expert recommended that the weight loading on back should not exceed 10-15% of body weight, a standard laid down for the sake of protecting spinal health and preventing back injuries. The attempt to carry a load exceeding the reasonable value may impose undue pressure and burden on the back and spine, as this may cause discomfort, pain or even injury.
- ᱯᱨᱮᱨᱚᱱᱟ
- The fact that teenagers aged 10-15 are mainly students and exposed to the risk of safety accidents while going to and leaving school is a global concern to be resolved. In response to poor visibility at night, designers have added light sets to schoolbags to improve individual visibility, thus reducing the likelihood of traffic accidents. And it is important to protect the normal growth and development of this age group, as they are going through a crucial developmental stage. In this sense, efforts to help them grow well and build a correct body shape are considered of paramount importance.
- ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ
- The project kicked off in Quanzhou, Fujian in in April 2023. With the weight loss spine support schoolbag projects released, we worked with the Ergonomics Research Center of Anhui Agricultural University to test and run product parameters, until the finished product design wrapped up on 20 December 2023.
- ᱠᱟᱹᱢᱤ ᱦᱚᱨ
- The high elastic suspension device in the shoulders area of the schoolbag absorbs the weight of the backpack and spreads the force by compression and stretching when user walks with it on his back, thus reducing the impact on shoulders. When walking with a schoolbag on shoulders, the bulged design of the back cushion waist provides extra support and stability to help the user keep a normal spinal curve when walking, the spinal area of the hollow, non stressed design provides no extra support, leaving the spine free to maintain its natural curvature and avoiding hunch over.
- ᱴᱤᱢ ᱥᱮᱫᱟᱭ ᱠᱚ
- Wang Peiyang
ᱥᱯᱚᱱᱥᱚᱨᱰ
Designers.org ᱠᱷᱚᱱ ᱯᱟᱨᱚᱢ ᱛᱟᱞᱟᱥ
ᱟᱞᱮᱭᱟᱜ ᱵᱤᱜᱽᱭᱟᱯᱚᱱ ᱥᱟᱹᱜᱟᱹᱭ ᱠᱚ ᱠᱷᱚᱱ ᱯᱨᱚᱰᱟᱠᱴ, ᱥᱮᱵᱟ ᱟᱨ ᱢᱚᱠᱟ ᱩᱫᱩᱜ ᱢᱮ᱾
ᱟᱨᱦᱚᱸ ᱠᱷᱚᱡ ᱢᱮ
ᱥᱟᱹᱜᱟᱹᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ
ᱢᱤᱫ ᱞᱮᱠᱟ ᱠᱮᱴᱮᱜᱚᱨᱤ ᱠᱷᱚᱱ ᱟᱨᱦᱚᱸ ᱯᱩᱨᱥᱠᱟᱨ ᱧᱟᱢᱟᱠᱟᱱ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱧᱮᱞ ᱢᱮ, ᱡᱚᱜᱭᱟᱛᱟ ᱧᱮᱞ ᱛᱮ ᱵᱟᱪᱷᱟᱣ ᱟᱠᱟᱱᱟ᱾
