Solarbreaker فوٽووولٽڪ فيڪاڊ شٽر by Jaroslaw Markowicz is a highly esteemed winner of the very prestigious 2020 A' Design Award چاندي انعام in تعميراتي مواد ۽ تعميراتي حصا ڊيزائن Competition Category.
چانديتعميراتي حصا· 2020
Solarbreaker فوٽووولٽڪ فيڪاڊ شٽر
Client: Phoenix Enterprise
A' Design Award چاندي انعام Winner in تعميراتي حصا Category
Verified Award Winner
Verify Award Status for #102697The Design
About Solarbreaker فوٽووولٽڪ فيڪاڊ شٽر
سولربريڪر هڪ فوٽووولٽڪ فيڪاڊ شٽر آهي، جيڪو عمارت جي سطحن کي توانائي پيدا ڪندڙ عنصرن ۾ تبديل ڪري ٿو. هي سرشتو ايڪسٽروڊيڊ ايلومينيم پروفائلن تي ٻڌل آهي، جن مٿان شمسي پينل لڳايا ويندا آهن. هر پينل کي وڌيڪ ڪارڪردگيءَ لاءِ پنجيتاليهه درجن تي جهڪايو ويندو آهي، ۽ هڪ چورس ميٽر جو هڪ ماڊيول سورهن ايل اِي ڊِي بلبن کي بجليءَ سان هلائي سگهي ٿو. اسيمبلي لاءِ لڳ ڀڳ ڪوبه اوزار گهربل نه آهي، ڇاڪاڻ ته پروفائل مائونٽنگ تي رکيا ويندا آهن ۽ پنهنجي وزن هيٺ لاڪ ٿي ويندا آهن. تارون پروفائلن جي اندر لڪايون وينديون آهن. فيڪاڊن کان علاوه، اهي ئي جزا وليون، رڪاوٽون ۽ بلائينڊ به ٺاهي سگهن ٿا.
The Recognition
About the A' Design Award چاندي انعام
Solarbreaker فوٽووولٽڪ فيڪاڊ شٽر A' Design Award چاندي انعام جو کٽيندڙ آهي، غير معمولي حد تائين معزز اعتراف جيڪو اعليٰ ترين درجي جي، شاندار ۽ متاثر ڪندڙ ڊيزائنن کي ڏنو وڃي ٿو. چاندي جا کٽيندڙ تمام گهڻا روشن ۽ انتهائي تخليقي ڪم آهن، جيڪي پنهنجي ڊيزائنرن جي شاندار مهارت، صلاحيت ۽ ذڪاوت کي ظاهر ڪن ٿا. Solarbreaker فوٽووولٽڪ فيڪاڊ شٽر کان اميد ڪئي وڃي ٿي ته اهو هڪ شاندار نمائشي ڪم هوندو، قابل ذڪر حد تائين پيشه ورانه ۽ ڳوڙهي جدت وارو. هي ڊيزائن جنهن A' Design Award چاندي انعام کٽيو آهي، هڪ انتهائي قابل ذڪر، ساراهيل ايجاد آهي جيڪا فائدو ڏئي ٿي ۽ فن، سائنس، ڊيزائن ۽ ٽيڪنالاجي جون حدون وڌائي ٿي. Solarbreaker فوٽووولٽڪ فيڪاڊ شٽر هڪ اهڙي تخليق آهي جنهن تي گهڻا حسد ڪن ٿا، جيڪا خواهشون جاڳائي ٿي، مثبت جذبا آڻي ٿي ۽ حيرت ۽ تعجب جي چڻنگ ٻاري ٿي.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- Our solutions make photovoltaics an integral part of the building. Solarbreaker products make possible to use the entire building facade for energy production without disturbing its aesthetics. The system has been developed to give the greatest configuration options in the simplest possible form. The main application of Solarbreaker are building facades, however, using the flexible capabilities of the system we can build barriers, fences, window blinds or free-standing blinds from it.
- Dimensions & Packaging
- Basic module dimensions 1000mm x 120 mm x 1000mm
- Tags
- Solar panels, photovoltaic, facade shutter, architecture, fence
- Production Technology
- The solarbreaker design is based on extruded profiles. Solar panels are mounted on the main profile. This method of assembly allows to easily separate materials so that the product can be recycled. The solution has been designed to be easy to install. Extruded profiles fold like lego blocks and allow for wide arrangement possibilities.
- Design Challenge
- The biggest challenge of the project was to create a product that would retain its lightness despite the internal electronics and photovoltaic panel
- Research
- The main research was to develop a product which can be adapted to almost any building. This required extensive analysis of the various buildings and their constructions. These studies have resulted in a design that is very easy to assemble. The first tests were made on 3D printed models. The wing loads were tested many times, which allowed the development of aluminium profiles with the required parameters.
- Inspiration
- The main inspiration for the product was the sun protection solutions existing on the market. Large glazed facades, unfortunately, make the rooms get very hot, the sun from the south can be a problem, however, we wanted to turn this disadvantage into an advantage. Solarbreaker allows to use almost the entire building for electricity production and at the same time protect it from the sun.
- Project Duration
- the project was developed in Warsaw. Conceptual work lasted from november 2018. After many prototypes and tests, the project was finally implemented in January 2020.
- Operation Flow
- Connecting profiles and building structures requires almost no tools. The structure is built directly on site from components. Finished profiles with photovoltaic panel just need to be put on the mounting and pressed - under the pressure of weight the element will lock. Solarbreaker is equipped with the elements necessary to connect it to the home power grid. Cable connections are hide inside the profiles, therefore the solution is durable and resistant to weather conditions. The 1m2 module will produce enough energy to power sixteen LED bulbs (80wat in total). Each panel is tilted at an angle of 45 degrees, which ensures the highest efficiency.
- Team Members
- Jarosław Markowicz, Daniel Ziomek
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
