JunXiang Cheng and Yi Yang طرفان Sprout سائيڪل انتهائي معتبر 2022 A' Design Award لوهه انعام جو فاتح آهي 3D ڇپيل شڪلون ۽ پراڊڪٽس ڊيزائن مقابلي جي درجي ۾.
لوهه3D ڇپائي· 2022
Sprout سائيڪل
JunXiang Cheng and Yi Yang طرفان
ڪلائنٽ: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao
3D ڇپائي درجي ۾ A' Design Award لوهه انعام فاتح
تصديق ٿيل ايوارڊ فاتح
ڊزائين #137286 لاءِ ايوارڊ جي حيثيت جي تصديق ڪريوڊزائن
Sprout سائيڪل بابت
اسپراؤٽ ھڪ سائيڪل آھي جيڪا ٽي-جہتي پرنٽنگ ذريعي تيار ڪئي وئي آھي. فريم کي ٽوپالاجي آپٽيمائيزيشن ذريعي شڪل ڏني وئي آھي، جيڪا مواد کي رڳو اُتي رکي ٿي جتي ان جي ضرورت ھجي ۽ استعمال ٿيندڙ ڪل مقدار کي گھٽائي ٿي. فائنائيٽ عنصر طريقي سان ڪيل جامد دٻاءُ جو تجزيو فريم جي بناوت جي استحڪام کي تصديق ڪري ٿو. آخري نموني کي اعليٰ کثافت واري نائيلون ۾ پرنٽ ڪيو ويو آھي. سائيڪل جي ڊيگھ 1630 ملي ميٽر، ويڪر 600 ملي ميٽر ۽ اوچائي 832 ملي ميٽر آھي. پرنٽنگ مھانگن ساڀن (molds) جي ضرورت کي ختم ڪري ٿي، ان ڪري ھر فريم پنھنجي انفرادي ڊزائن جي پيروي ڪري سگھي ٿو.
سڃاڻپ
A' Design Award لوهه انعام بابت
Sprout سائيڪل A' Design Award لوهه انعام جو کٽيندڙ آهي، معزز اعتراف جيڪو انهن سٺين ڊيزائنن کي ڏنو وڃي ٿو جيڪي چڱيءَ طرح ڊزائين ڪيل تخليقن کان متوقع پيشه ورانه ۽ صنعتي گهرجون پوريون ڪن ٿيون. لوهه جا کٽيندڙ پنهنجي خالقن جي وڏي مهارت، اعليٰ ماهري، ماهرانه سمجھ ۽ تخليقي صلاحيت ڏيکارين ٿا. Sprout سائيڪل کان اميد ڪئي وڃي ٿي ته اهو هڪ تمام گهڻو قدر ڪيل، ساراهيل ۽ پياري تخليق هوندو جيڪو عملي ۽ جدت وارو آهي. هي ڊيزائن جنهن A' Design Award لوهه انعام کٽيو آهي، صنعت جا بهترين طريقا گڏ ڪري ٿو ۽ علم ۽ صلاحيت سان ڳنڍيل قابل ٽيڪنيڪل خاصيتون رکي ٿو. Sprout سائيڪل جي سنجيدگيءَ ڪري عزت ڪئي وڃي ٿي ۽ اهو زندگيءَ جي معيار ۾ بهتري آڻڻ لاءِ ٺاهيل آهي جيڪا دنيا کي بهتر جڳهه بڻائڻ ۾ مدد ڪري ٿي.
ڊزائن جي پسمنظر
پريس ڪِٽ
ڊزائنر طرفان فراهم ڪيل ڪريڊٽس، ٽيم ميمبرز ۽ ٽيڪنيڪل تفصيلات.
- منفرد خاصيتون
- Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
- ماپ ۽ پيڪيجنگ
- Length 1630mm, width600mm, height 832mm
- ٽيگ
- Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
- پيداواري ٽيڪنالاجي
- The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
- ڊزائين چيلينج
- The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
- تحقيق
- Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
- الهام
- According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
- منصوبي جو عرصو
- The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
- عمل جو فلو
- By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
- ٽيم ميمبر
- Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao
اسپانسرڊ
Designers.org کان اڳتي ڳوليو
اسان جي اشتهاري ڀائيوالن جون پراڊڪٽس، خدمتون ۽ موقعا ڳوليو.
وڌيڪ ڳولڻ لاءِ
لاڳاپيل ڊزائنز
ساڳي درجي مان وڌيڪ ايوارڊ جيتندڙ ڊزائنز ڳوليو، جيڪي قابليت جي بنياد تي چونڊيل آهن.
