DefeXtiles Textilná výrobná technika by Jack Forman

DefeXtiles Textilná výrobná technika by Jack Forman is a highly esteemed winner of the very prestigious 2021 Bronzová cena A' Design Award in 3D tlač Competition Category.

Bronzová3D tlač· 2021

DefeXtiles Textilná výrobná technika

by Jack Forman

Client: Tangible Media Group, MIT Media Lab

Bronzová cena A' Design Award Winner in 3D tlač Category

33,223

Verified Award Winner

Verify Award Status for #112633

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About DefeXtiles Textilná výrobná technika

DefeXtiles je technika na výrobu tenkých, ohybných textílií na štandardných 3D tlačiarňach. Metóda riadi podextrúziu tak, aby vznikali malé zhluky s tenkými vláknami medzi nimi. Výsledné pravidelné medzery dodávajú vytlačenej látke textilný vzhľad, priedušnosť, ohybnosť a rozťažnosť, a to aj pri použití tuhých materiálov, ako je kyselina polymliečna. Textílie sa tlačia kolmo na tlačovú podložku, vďaka čomu je možné vytvárať plisované a zakrivené tvary. Medzi aplikácie patria odevy, hmatateľné rozhrania a bedmintonové loptičky. Vodivé vlákno dokáže do látky vložiť aj elektrické obvody.

The Recognition

About the Bronzová cena A' Design Award

DefeXtiles Textilná výrobná technika je laureát Bronzovej ceny A' Design Award, vysoko prestížneho uznania udeľovaného vynikajúcim dizajnom, ktoré sa vyznačujú kreativitou, vynaliezavosťou a bystrosťou. Laureáti Bronzovej ceny sú plne zručné a nápadne kreatívne artefakty, ktoré potvrdzujú rozsiahle skúsenosti, predstavivosť a zdatnosť svojich dizajnérov. Od DefeXtiles Textilná výrobná technika sa očakáva, že bude vysoko cenený, obdivovaný a milovaný predmet, pozoruhodne profesionálny a inovatívny. Tento dizajn ocenený Bronzovou cenou A' Design Award zahŕňa najlepšie postupy v umení, vede, dizajne a technológii a vyniká pozornosťou k detailom. DefeXtiles Textilná výrobná technika skvele uspokojuje potreby, dotýka sa túžob, očarúva city a vzbudzuje zvedavosť.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
Tags: textile, 3d print, lace, advanced manufacturing, fabric
Production Technology: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
Design Challenge: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
Research: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
Inspiration: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
Project Duration: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
Operation Flow: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
Team Members: Jack Forman, Mustafa Doga Dogan, Hamilton Foryseth and Hiroshi Ishii