Hydrospine Balast Za Prosto Potapljanje – avtor Ludovic Lahccen and Raoul Morel

Delo Hydrospine Balast Za Prosto Potapljanje avtorja Ludovic Lahccen and Raoul Morel je izjemno cenjeni dobitnik prestižne nagrade 2023 Srebrna nagrada A' Design Award v tekmovalni kategoriji Oblikovanje športnih artiklov, fitnes in rekreacijske opreme.

SrebrnaŠportni artikli· 2023

Hydrospine Balast Za Prosto Potapljanje

avtor/ica: Ludovic Lahccen and Raoul Morel

Naročnik: Apnea Sub

Dobitnik nagrade Srebrna nagrada A' Design Award v kategoriji Športni artikli

755,954

Potrjeni dobitnik nagrade

Preverite status nagrade za #148412

Obiščite spletno stran Ogled na A' Design Award Sporočilo za javnost Značka nagrade

Barve

Dizajn

O dizajnu Hydrospine Balast Za Prosto Potapljanje

Sistem hrbtnih uteži za prosto potapljanje, ki omogoča ultra natančno ravnotežje in plovnost. Njegova prednost, njegova modularna in hitra nosilnost, do 6 kg, uporabna v katerem koli položaju, kateri koli disciplini potapljanja na prostem. Opremljen je s hitro sprostitvijo in zaponkami za prilagajanje različnim velikostim, ne glede na spol, kar nudi neverjetno udobje, zaradi katerega hitro pozabite na težo, ki jo nosite. Njegova zasnova izhaja iz združitve morskih živali in opreme, ustvarjene za hitrost, ki daje zelo hidrodinamične linije in nudi optimalno drsenje pod vodo. Zaradi svoje vsestranskosti je edinstven koncept

Priznanje

O nagradi Srebrna nagrada A' Design Award

Hydrospine Balast Za Prosto Potapljanje je prejemnik Srebrne nagrade A' Design Award, izjemno prestižnega priznanja, ki se podeljuje čudovitim, impresivnim vrhunskim oblikovanjem. Prejemniki Srebrne nagrade so izjemno briljantna in zelo ustvarjalna dela, ki ponazarjajo izjemno strokovnost, talent in bistrost svojih oblikovalcev. Od Hydrospine Balast Za Prosto Potapljanje se pričakuje, da bo čudovito, zgledno delo, opazno profesionalno in globoko inovativno. To oblikovanje, nagrajeno s Srebrno nagrado A' Design Award, je zelo opazen, občudovan izum, ki koristi in premika meje umetnosti, znanosti, oblikovanja in tehnologije. Hydrospine Balast Za Prosto Potapljanje je stvaritev, ki ji mnogi zavidajo, ki prebuja želje, prinaša pozitivna čustva in vzbuja začudenje in občudovanje.

V ozadju dizajna

Komplet za medije

Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.

Edinstvene lastnosti: It is the only dorsal ballast of this type that can support up to six kilos, the leads distribution in the container which can be quickly and easily modulated. Its assets are, its modularity, its comfort which you forget the weight transported, its hydrodynamic look for an optimal glide. Its safety with its quick release buckle. It can be used in all freediving activities and in all positions. It is undoubtedly the most advanced system to date allowing for ultra-precise buoyancy and neutrality.
Dimenzije in embalaža: Storage shell 150mm x 45mm x 370mm
Lead 105mm x 7,5mm x 40mm
Oznake: Freediving, apnea, dive, diving, weight, spine, hydrodynamic, lestage, weighting, sport
Proizvodna tehnologija: The materials used are all waterproof, easy to source and inexpensive (elastic and polypropylene straps, plastic buckles, textiles and lead). The shell is made of thermoformed textile with a zipped side opening. The internal structure has slots to fix the leads like a spine and accordion ribs to follow all movements. The leads were designed from a single template, to limit the molds and keep a hydrodynamic structure. Thus covering 98% of user needs. The rear nozzle allows air to escape.
Oblikovalski izziv: Many factors need to be taken into account and it has not always been easy for some team members to understand them. A freediving session was necessary to measure the problem. The biggest difficulty was the development of the harness, because it was difficult to hold 6 kg on the back and at the same time not prevent the rib cage from inflating, to be safe with a quick release and to be homologated in competition, to adapt to different morphologies. This required extensive structural and material testing.
Raziskave: Before launching, we inventoried all the solutions available on the market and surveyed a panel of a hundred freedivers.
Next, we listed all the desired requirements for the product, assigning them a degree of importance. As well as the impacts that will occur on the different use cases. We quickly agree to test each hypothesis by prototyping it summarily. It was a principle rich in lessons allowing us to see the gap between the idea and reality while showing what needs to be corrected.
Inspiracija: The concept was born out of not having enough practical and comfortable weight. As we would like a different approach, we did not have an established reference. We let our imagination free by relying on other areas. For the design of the shapes, we were inspired by sea animals as well as machines created for speed. Hydrodynamics also influenced the structure. Forcing us to review the structure to keep the modular aspect, and that it can remain flexible to follow the different body movements.
Trajanje projekta: The project started solo in August 2019 in Lille, France. Then continued with the Transalley incubator in Valenciennes, France, from September 2020 to September 2022. Then solo again, with the collaboration of Raoul Morel as product designer.
Potek delovanja: The equipment is carried like a backpack. The buckle at the front allows the straps to be adjusted according to size and to instantly release the weight with one hand by simple pressure.
The envelope containing the leads has reception racks to hold the pellets in place which are sandwiched with the upper part of the cover so that they cannot move. Leads can be placed in any order for extremely precise balancing.
Patenti: Patent application FR2111503 filed on October 28, 2021. Transformed into a Certificate of Utility on September 07, 2022. Title: Diving equipment for freediver, Possessor: Ludovic Lahccen
Člani ekipe: Creative Designer and Art Director: Ludovic Lahccen
Product Designer: Raoul Morel
Technical and Mechanical Engineer: Steven Pingon
Engineer and technical design office: Charles Pionchon
Tech Designer and prototypes: Alan Philippart
Plastics processing and 3D printing: Olivier Paul
Textile prototypes: Christiane Lefebvre
Zasluge za slike: Main image is Image #1 Raoul Morel
Optional Image #1 Raoul Morel
Optional Image #2 Raoul Morel
Optional Image #3 Raoul Morel
Optional Image #4 Raoul Morel