DefeXtiles Téhnik Pabrikasi Tékstil ku Jack Forman

Karya DefeXtiles Téhnik Pabrikasi Tékstil ku Jack Forman nyaéta pamenang anu dihormat pisan tina 2021 A' Design Award Perunggu anu bergengsi dina Katégori Kompetisi Citak 3D.

PerungguCitak 3D· 2021

DefeXtiles Téhnik Pabrikasi Tékstil

ku Jack Forman

Klién: Tangible Media Group, MIT Media Lab

Pamenang A' Design Award Perunggu dina Katégori Citak 3D

34,002

Pamenang Panghargaan anu Diverifikasi

Verifikasi Status Panghargaan pikeun #112633

Buka Situs Tingali di A' Design Award Siaran Pers Lencana Panghargaan

Warna

Désain

Ngeunaan DefeXtiles Téhnik Pabrikasi Tékstil

DefeXtiles nyaéta téhnik pikeun ngahasilkeun tékstil ipis jeung lentur ngagunakeun paranti citak 3D standar. Métode ieu ngatur ékstrusi handap (under-extrusion) sangkan ngabentuk gumpalan leutik anu dihijikeun ku benang-benang tipis di antarana. Kekosongan periodik anu dihasilkeun masihan citakan tékstil sifat siga lawon, résep napas, lentur, sarta bisa mulur, sanajan ngagunakeun bahan anu kaku saperti polylactic acid. Tékstil ieu dicitak tegak lurus kana méja citak, ku kituna wangun anu ngariung sarta ngalengkung bisa dijieun. Aplikasina kaasup pakéan, antarmuka nu bisa disambetan, jeung kok bulu tangkis. Filamén konduktif bisa disimpen dina lawon pikeun ngawangun jalur sirkuit.

Pangakuan

Ngeunaan A' Design Award Perunggu

DefeXtiles Téhnik Pabrikasi Tékstil mangrupa juara A' Design Award Perunggu, pangakuan anu pohara bergengsi anu dipasihkeun ka desain unggul anu dicirikeun ku kréativitas, kacerdikan jeung kawaspadaan. Para juara Perunggu téh artéfak anu lobaan kaahlian jeung kréatif pisan anu ngabuktikeun pangalaman anu lega, imajinasi jeung kacerdasan para désainerna. DefeXtiles Téhnik Pabrikasi Tékstil diharepkeun jadi objék anu dihargaan, dikagumi jeung dipikanyaah anu profésional jeung inovatif. Desain juara A' Design Award Perunggu ieu ngalebetkeun prakték pangalusna dina seni, élmu, desain jeung téknologi, sarta unggul dina perhatian kana détail. DefeXtiles Téhnik Pabrikasi Tékstil minuhan kabutuhan kalayan éndah, nyentuh kahayang, nyenangkeun rasa, jeung narik rasa panasaran.

Di Balik Désain

Kit Pers

Krédit, anggota tim sareng detil téknis anu disayogikeun ku désainer.

Sipat Unik: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
Tag: textile, 3d print, lace, advanced manufacturing, fabric
Téknologi Produksi: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
Tantangan Desain: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
Panalungtikan: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
Inspirasi: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
Durasi Proyék: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
Alur Operasi: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
Anggota Tim: Jack Forman, Mustafa Doga Dogan, Hamilton Foryseth and Hiroshi Ishii