Aida Sekkei Precut Pabrik ku Nobuaki Miyashita

Karya Aida Sekkei Precut Pabrik ku Nobuaki Miyashita nyaéta pamenang anu dihormat pisan tina 2024 A' Design Award Emas anu bergengsi dina Katégori Kompetisi Arsitéktur.

EmasArsitéktur· 2024

Aida Sekkei Precut Pabrik

ku Nobuaki Miyashita

Klién: Aida Sekkei Co., Ltd.

Pamenang A' Design Award Emas dina Katégori Arsitéktur

150,107

Pamenang Panghargaan anu Diverifikasi

Verifikasi Status Panghargaan pikeun #160159

Buka Situs Tingali di A' Design Award Siaran Pers Lencana Panghargaan

Warna

Désain

Ngeunaan Aida Sekkei Precut Pabrik

Rancangan pabrik anyar Aida Sekkei museurkeun kana pamotongan kai sateuacanna. Konsépsina nyaéta nyiptakeun arsitéktur anu ngawujudkeun runtuyan prosés pangolahan kai. Éta ngawengku jalan pejalan tina kaca anu ngambang panjangna kirang langkung 100 méter di jero pabrik, dirarancang pikeun sémah niténan sacara langsung sakabéh prosés pamotongan sateuacanna. Gedong kantor gaduh rohangan lega kalayan rangka tina bahan sisi ipis, anu biasa dipaké salaku bahan tambahan dina imah kai. Desain ieu ngahijikeun sadaya unsur pikeun nyiptakeun pabrik paméré, nekenkeun katingalian sareng daya tarik éstétis dina unggal aspék.

Pangakuan

Ngeunaan A' Design Award Emas

Aida Sekkei Precut Pabrik mangrupa juara A' Design Award Emas, pangakuan anu pohara bergengsi anu dipasihkeun ka desain kelas kahiji, ngaranjing jeung unggul. Para juara Emas téh kréasi anu pohara inovatif, visionér jeung matak ngacung anu ngagambarkeun kajeniusan, hikmah jeung kaahlian para désainerna. Aida Sekkei Precut Pabrik diharepkeun jadi panemuan anu pohara dipuji, pelopor tren, sarta monumental anu méré nilai anu can kungsi aya. Desain juara A' Design Award Emas ieu mangrupa proyék spéktakulér tur dihormat anu pohara mangpaatna sarta ngamajukeun watesan seni, élmu, desain jeung téknologi. Aida Sekkei Precut Pabrik nyiptakeun rasa hayang anu kuat, ngahudang gairah, ngadorong kréativitas, jeung ngagumkeun urang.

Di Balik Désain

Kit Pers

Krédit, anggota tim sareng detil téknis anu disayogikeun ku désainer.

Sipat Unik: This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
Diménsi & Bungkusan: Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2

Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden

Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2
Tag: architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
Téknologi Produksi: As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
Tantangan Desain: When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
Panalungtikan: Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
Inspirasi: Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
Durasi Proyék: This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
Alur Operasi: This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
Patén: None
Krédit Gambar: Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020