Muundo Steel U Meza Ya Bar na Joey van Beek ni mshindi mashuhuri wa tuzo ya kifahari ya 2022 Tuzo ya Chuma ya A' Design Award katika Kategoria ya Mashindano ya Usanifu wa Sanaa Nzuri na Usakinishaji wa Sanaa.

ChumaSanaa Nzuri· 2022

Steel U Meza Ya Bar

na Joey van Beek

Mteja: Industrial Office

Mshindi wa Tuzo ya Chuma ya A' Design Award katika Kategoria ya Sanaa Nzuri

20,332

Mshindi wa Tuzo Aliyethibitishwa

Thibitisha Hali ya Tuzo kwa #137000

Tazama kwenye A' Design Award Taarifa kwa Vyombo vya Habari Beji ya Tuzo

Rangi

Muundo

Kuhusu Steel U Meza Ya Bar

Steel U, muundo ambao ulitegemea zamani, uliundwa sasa na unafanywa kwa nia ya kuhamasisha siku zijazo. Hii ilisababisha mchanganyiko wa meza ya chuma iliyotumika tena ambayo inaungwa mkono na miguu thabiti ambayo iliharibiwa na hisia za kimwili. Kwa njia hii muundo unakuwa sehemu ya mtu ambaye huharibu simiti. Mchanganyiko huo ulitoa changamoto za kimwili na kiakili wakati wa mchakato huo, lakini hatimaye ulisababisha muundo ambao ulitoa utimilifu.

Utambuzi

Kuhusu Tuzo ya Chuma ya A' Design Award

Steel U Meza Ya Bar ni mshindi wa Tuzo ya Chuma ya A' Design Award, utambuzi wenye heshima unaotolewa kwa miundo mizuri inayokidhi mahitaji ya kitaalamu na ya kiviwanda yanayotarajiwa kutoka kwa kazi zilizobuniwa vizuri. Washindi wa Chuma huonyesha ustadi mkubwa, utaalamu wa hali ya juu, uelewa wa kitaalamu na uwezo wa kibunifu wa waumbaji wao. Steel U Meza Ya Bar inatarajiwa kuwa kazi inayothaminiwa sana, kupendwa na kuenziwa, ambayo ni ya vitendo na bunifu. Muundo huu ulioshinda Tuzo ya Chuma ya A' Design Award unajumuisha mbinu bora za tasnia na una sifa za kiufundi zenye uwezo zilizounganishwa na ujuzi na kipaji. Steel U Meza Ya Bar inaheshimiwa kwa uangalifu wake na imebuniwa kutoa maboresho ya ubora wa maisha yanayosaidia kuufanya ulimwengu kuwa mahali bora zaidi.

Nyuma ya Muundo

Vifaa vya Habari

Mikopo, wanachama wa timu na maelezo ya kiufundi yaliyotolewa na mbuni.

Sifa za Kipekee: Steel U, is a combination of reusing emotion and scrap metal. The tabletop is made from 70mm solid reused steel which is supported by two concrete blocks. These are connected by reinforcement steel which is made into shape by forging. The shape of the block is made by the person who owns the table. The way this is done; is by pouring first a smooth concrete block in a mold, which then will destroyed by the owner with a sledgehammer and jack hammer.
Vipimo na Ufungashaji: Width 3220mm x Depth 650mm x Height 1120mm. Weight 988kg. Tabletop is S355 steel displayed under 10mm hardened glass. Legs are regular concrete with an inner steel shell to create an air chamber for reducing weight. Connection rods are reinforcement steel.
Lebo: Steel U, Thoughts, Emotion, Steel, Concrete, Forged, Industrial Office
Teknolojia ya Uzalishaji: The tabletop is made from 70mm S355 steel which was used for producing machine parts. The shapes are made by the oxygen cutting process and when no more parts could come from the plate, it became scrap metal. This was outside, which gave after 2 years in the rain and sun the current look. The reinforcement steel rods where then first forged in an arch and then welded to the tabletop. After making a steel mold, the reinforcement steel was place in the mold and then covered in regular concrete.
Changamoto ya Ubunifu: The hardest part was to make the concrete legs, which had to look like demolition but had to show the emotion of the owner. So I called help from my best friend, who is my father, because he had built his own house. I explained the look and strength that I wanted to have and he knew right away what was needed and how to execute. This way he thought and showed me what I needed to know so I could make the second leg myself with him as my mentor by my side checking.
Utafiti: The first research I did, was to check if I could find on the internet a furniture design that ,was or looked like it, came from a demolition. After not finding it, I started with the question on how to make the process an experience. My mind went from concrete, to create, to sculpting, to sculpture, to how to sculpt, to thoughts, to experiencing and then to emotion. This resulted in the method of the owner using emotions physically to destroying the legs first to then create.
Msukumo: At the company which I have with my father to build conveyors, I wanted to create an office that was not about functionality, but about productivity. Inspired by my love for industrial designs I noticed the tabletop between the scrap metal, and wanted to use it because that is what you see when standing behind it. The legs got inspiration from demolition. But I wanted to put literally my emotions in to the concrete base, so I came up with the concept of pouring it first and then destroying it.
Muda wa Mradi: The idea started on July 2020 in Ede, The Netherlands at my home. But because the tabletop did not yet have the right appearance I needed to wait. When it did have the appearance, it was January 2022. The legs were then made and finished on 13 February 2022 in Ede, The Netherlands at my workshop.
Mtiririko wa Uendeshaji: The tabletop is made from scrap metal, so this way it cannot be replicated because steel and the way it is handled during production is never the same. Then the reinforcement steel to support it is there to make it look as if the concrete legs came out of a demolition. The concrete shape is not just for the demolition look, but also to make the table show the emotion of the owner. The owner will have thoughts when destroying the legs and those thought at that moment will be visible to them.