Muundo The Flett Kifuniko cha Paa na Scott Flett ni mshindi mashuhuri wa tuzo ya kifahari ya 2023 Tuzo ya Chuma ya A' Design Award katika Kategoria ya Mashindano ya Usanifu wa Miundo na Bidhaa za Uchapishaji wa 3D.
ChumaUchapishaji wa 3D· 2023
The Flett Kifuniko cha Paa
na Scott Flett
Mteja: Scott Flett Architecture Workshop.
Mshindi wa Tuzo ya Chuma ya A' Design Award katika Kategoria ya Uchapishaji wa 3D
Mshindi wa Tuzo Aliyethibitishwa
Thibitisha Hali ya Tuzo kwa #141650Muundo
Kuhusu The Flett Kifuniko cha Paa
Flett ni kifuniko cha paa kilichobuniwa kwa ajili ya vifuniko vya usanifu wenye mshono simama. Kifuniko hiki kinatengenezwa kwa uchapishaji wa 3D kwa plastiki ya ASA, kina vipimo vya milimita 265 kwa 50 kwa 100 na unene wa milimita 2. Umbo lake linapita chini ya karatasi moja ya kifuniko, kinaruhusu mabadiliko ya mwelekeo, kisha kinapitia juu ya karatasi inayofuata. Sehemu hii inalingana na umbo na rangi ya karatasi ya paa, na nyenzo yake ina uthabiti wa joto, uthabiti dhidi ya miale ya UV, na haina sumu. Kifuniko hiki kinaweza kusakinishwa kwa mfuatano na mafundi wa kawaida, na kinalenga kupunguza uvujaji katika sehemu ngumu za muunganiko wa paa.
Utambuzi
Kuhusu Tuzo ya Chuma ya A' Design Award
The Flett Kifuniko cha Paa ni mshindi wa Tuzo ya Chuma ya A' Design Award, utambuzi wenye heshima unaotolewa kwa miundo mizuri inayokidhi mahitaji ya kitaalamu na ya kiviwanda yanayotarajiwa kutoka kwa kazi zilizobuniwa vizuri. Washindi wa Chuma huonyesha ustadi mkubwa, utaalamu wa hali ya juu, uelewa wa kitaalamu na uwezo wa kibunifu wa waumbaji wao. The Flett Kifuniko cha Paa inatarajiwa kuwa kazi inayothaminiwa sana, kupendwa na kuenziwa, ambayo ni ya vitendo na bunifu. Muundo huu ulioshinda Tuzo ya Chuma ya A' Design Award unajumuisha mbinu bora za tasnia na una sifa za kiufundi zenye uwezo zilizounganishwa na ujuzi na kipaji. The Flett Kifuniko cha Paa inaheshimiwa kwa uangalifu wake na imebuniwa kutoa maboresho ya ubora wa maisha yanayosaidia kuufanya ulimwengu kuwa mahali bora zaidi.
Nyuma ya Muundo
Vifaa vya Habari
Mikopo, wanachama wa timu na maelezo ya kiufundi yaliyotolewa na mbuni.
- Sifa za Kipekee
- The Flett Flashing is the world’s first 3D printed roof flashing. 3D printing allows the flashing to perfectly match any specified roofing profile and colour and permits junctions between roofing sheets of different pitches to be installed without difficulty. This invention makes architectural cladding quicker, easier and cheaper to install and represents a step change for the roofing and cladding industry.
- Vipimo na Ufungashaji
- 265mm x 50mm x 100mm
2mm thick ASA plastic, color matched to roofing profile. - Lebo
- roof, flashing, roof flashing, 3d print, 3d printing, additive forming
- Teknolojia ya Uzalishaji
- The Flett flashing is produced with 3d printing or additive forming.
I designed a mold that under-laps the sectional profile of standing seam cladding sheet, permits any change in direction and then overlaps the sectional profile of an subsequent sheet.
I developed an additive manufacturing process that consistently produces a robust product that is thermally stable, UV stable, nontoxic and color matched to the roofing sheet.
I developed an installation method that allows the sheets to be installed in sequence and quickly. The installed product looks clean, simple and aesthetically consistent. - Changamoto ya Ubunifu
- Architectural Cladding is installed by specialist trade personnel. This generally requires decades of experience, is time consuming and as a consequent is expensive. This often leads to architectural cladding being priced out of commerciality. With the Flett Flashing, this can be installed by carpenters, builders or other trades without the requirement of a specialist trade.
- Utafiti
- The Flett Flashing aspires to catalyse a global rethink of roof design.
The world has only modestly changed the way it designs roofs since the invention of corrugated iron in 1829.
Roofs are at the very essence of shelter. Our shelter, and built environment as a whole, needs to respond to its environment.
This is particularly applicable in Australia, where the homes are still often styled on European and American homes. Australia deserves to have a roof design that suits its conditions.
The Flett Flashing is this Australian design. It not only gives greater creative options to architects and better solutions for builders but it also responds to our unique environmental challenges, and way of life.
Everyone knows someone whose roof has leaked. It is one of the most common building defects and even minor damage causes an immense financial burden. The Flett Flashing aims to prevent this problem. - Msukumo
- Traditional Metal Roofing or Architectural Cladding continues to be an enduring method of cladding throughout the world. One of the design challenges of using architectural cladding is how to resolve junctions. The issue is that each standing seam panel is asymmetrical and must be installed in sequence. There is currently no product on the market for architectural cladding that facilitates a quick change in direction. This has been done by hand for hundreds of years. The design challenge is to create a durable and aesthetically pleasing flashing suitable for standing seam cladding that is quick and easy to install.
- Muda wa Mradi
- The project started on January 2017 and is ongoing.
The Flett Flashing has been installed on a house that I built in Hobart, Tasmania.
The Flett flashing is a derivative of 4 years of relentless design iterations and constant printing. The form is the result of over 1000 days of improvement.
I am continuing the commercialisation of this invention in Sydney at the UNSW start up hub: 'Founders'. - Mtiririko wa Uendeshaji
- I hope to inspire the world to improve roof design.
I am the first architect in the world to have designed a 3d printed roof flashing. I am also the first builder in the world to have manufactured and installed a 3d printed roof flashing.
I have shown that architects can have more design options and builders have more solutions. I have demonstrated that 3d printing belongs in the collective site toolbox.
Australia, and the world, has a problem with leaking roofs. Difficult junctions and poor roof design are the leading causes of roof leaks. My design addresses this problem.
The Flett Flashing can be tailored to suit multiple profiles, responding to design requirements of its local environment, enabling application to a wide range of locations. - Hataza
- Patented. Patent No 2020314005. Year 2020. Australia
Trademark: 2022. Scott Flett Architecture Workshop
Flett: Australian Trade Mark Registration No. 2217228
The Flett Flashing: Registered Design 201915882
Australian Patent: 2020314005
PCT/AU2020/050728 - Wanatimu
- Scott Flett
- Haki za Picha
- Video Credits: Chris Shurman and Charles Whittington
Image Credits: Chris Shurman and Mark Lobo
Imedhaminiwa
Gundua Zaidi ya Designers.org
Gundua bidhaa, huduma na fursa kutoka kwa washirika wetu wa matangazo.
Zaidi ya Kuchunguza
Miundo Inayohusiana
Chunguza miundo zaidi iliyoshinda tuzo kutoka kategoria hiyo hiyo, iliyochaguliwa kwa ubora.
