Muundo Aida Sekkei Precut Kiwanda na Nobuaki Miyashita ni mshindi mashuhuri wa tuzo ya kifahari ya 2024 Tuzo ya Dhahabu ya A' Design Award katika Kategoria ya Mashindano ya Usanifu wa Majengo, Ujenzi na Miundo.
DhahabuUsanifu wa Majengo· 2024
Aida Sekkei Precut Kiwanda
Mteja: Aida Sekkei Co., Ltd.
Mshindi wa Tuzo ya Dhahabu ya A' Design Award katika Kategoria ya Usanifu wa Majengo
Mshindi wa Tuzo Aliyethibitishwa
Thibitisha Hali ya Tuzo kwa #160159Muundo
Kuhusu Aida Sekkei Precut Kiwanda
Mpango mpya wa kiwanda wa Aida Sekkei unazingatia ukataji wa mbao kabla ya ujenzi. Dhana yake ni kuunda usanifu wa jengo unaoonyesha mfululizo wa usindikaji wa mbao. Inajumuisha njia ya kutembea iliyoning'inia, iliyozungukwa na kioo, yenye urefu wa takriban mita 100 ndani ya kiwanda, iliyoundwa ili wageni waweze kuangalia kwa karibu mchakato mzima wa ukataji wa awali. Jengo la ofisi lina nafasi kubwa zenye trusses zilizotengenezwa kutokana na vifaa vya feather edge, ambavyo kwa kawaida hutumiwa kama vifaa vya ziada katika nyumba za mbao. Muundo huu unaunganisha vipengele vyote ili kuunda kiwanda cha maonyesho, ukisisitiza mwonekano wazi na mvuto wa kimaridadi katika kila kipengele.
Utambuzi
Kuhusu Tuzo ya Dhahabu ya A' Design Award
Aida Sekkei Precut Kiwanda ni mshindi wa Tuzo ya Dhahabu ya A' Design Award, utambuzi wenye heshima kuu unaotolewa kwa miundo ya daraja la kwanza, ya ajabu na ya kuvutia. Washindi wa Dhahabu ni kazi bunifu mno, zenye maono makubwa na za kung'aa kwa umaridadi zinazoakisi kipaji, hekima na ustadi wa wabunifu wao. Aida Sekkei Precut Kiwanda inatarajiwa kuwa uvumbuzi unaosifiwa sana, wa kuweka mielekeo na wa kihistoria unaoleta thamani isiyo na kifani. Muundo huu ulioshinda Tuzo ya Dhahabu ya A' Design Award ni mradi wa kustaajabisha na unaoheshimika unaonufaisha sana na kupanua mipaka ya sanaa, sayansi, usanifu na teknolojia. Aida Sekkei Precut Kiwanda huzua hisia kali za hamu, huamsha shauku, huhimiza ubunifu na hutuvutia.
Nyuma ya Muundo
Vifaa vya Habari
Mikopo, wanachama wa timu na maelezo ya kiufundi yaliyotolewa na mbuni.
- Sifa za Kipekee
- This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
- Vipimo na Ufungashaji
- Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2
Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden
Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2 - Lebo
- architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
- Teknolojia ya Uzalishaji
- As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
- Changamoto ya Ubunifu
- When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
- Utafiti
- Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
- Msukumo
- Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
- Muda wa Mradi
- This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
- Mtiririko wa Uendeshaji
- This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
- Hataza
- None
- Haki za Picha
- Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020
Imedhaminiwa
Gundua Zaidi ya Designers.org
Gundua bidhaa, huduma na fursa kutoka kwa washirika wetu wa matangazo.
Zaidi ya Kuchunguza
Miundo Inayohusiana
Chunguza miundo zaidi iliyoshinda tuzo kutoka kategoria hiyo hiyo, iliyochaguliwa kwa ubora.
