ዲዛይን Aida Sekkei Precut ፋብሪካ ብ Nobuaki Miyashita ኣብ ናይ ውድድር ምድብ ንድፊ ኣርክቴክቸር፣ ህንጻን ቅርጽን ኣዝዩ ዝኸበረ ተሸላማይ ናይ 2024 ናይ ወርቂ ሽልማት A' Design Award እዩ።
ወርቂኣርክቴክቸር· 2024
Aida Sekkei Precut ፋብሪካ
ዓሚል: Aida Sekkei Co., Ltd.
ኣብ ምድብ ኣርክቴክቸር ተሸላማይ ናይ ወርቂ ሽልማት A' Design Award
ዝተረጋገጸ ተሸላማይ
ንቁጽሪ #160159 ሽልማት ኣረጋግጽእቲ ዲዛይን
ብዛዕባ Aida Sekkei Precut ፋብሪካ
ናይ Aida Sekkei ሓድሽ ፋብሪካ መደብ ኣብ ቅድመ-ምቑራጽ ኣእዋም ዝተመርኮሰ እዩ። ኣተሓሳስባኡ ንተኸታታሊት መስርሕ ምስራሕ ኣእዋም ዘንጸባርቕ ስነ-ህንጻ ንምፍጣር ዝማእከለ እዩ። ኣብ ውሽጢ ፋብሪካ ኣስታት 100 ሜትሮ ንውሓት ዘለዎ ዝተኸዋወዘን ብመስትያት ዝተኸቢበን መገዲ የጠቓልል፡ እዚ ድማ ጋሻት ንመላእ መስርሕ ቅድመ-ምቑራጽ ብቐረባ ንኽዕዘቡ ዝተዳለወ እዩ። ህንጻ ቤት ጽሕፈት፡ ካብ feather edge ንዋት ዝተሰርሑ መወጣጠሪ ዘለዎም ሰፊሕ ቦታታት የሕውይ፡ እዚኦም ድማ ልሙድ ኮይኖም ኣብ ኣእዋም ኣባይቲ ከም ተወሳኺ ንዋት ዝጥቀሙ እዮም። እቲ ዲዛይን ንኹሎም ባእታታት ብምውህሃድ፡ ኣብ ኩሉ ገጽታ ርኣይነትን ስነ-ጽባሕነትን ዘጽንዕ፡ ንርኢቶ ዝተዳለወ ፋብሪካ የፍሪ።
እቲ ኣፍልጦ
ብዛዕባ ናይ ወርቂ ሽልማት A' Design Award
Aida Sekkei Precut ፋብሪካ ናይ ወርቂ ሽልማት A' Design Award ዝዓወተ እዩ፣ ንቀዳምነት ደረጃ ዘለዎም፣ ዘገርሙን ዝተፈልዩን ዲዛይናት ዝወሃብ ኣዚዩ ክቡር ኣፍልጦ። ዘዓወቱ ወርቂ ጥበብን ፍልጠትን ክእለትን ዲዛይነራቶም ዘንጸባርቑ ኣዚዮም ሓደሽቲ፣ ርእይቶ ዘለዎምን ዘንጸባርቑን ፍጥረታት እዮም። Aida Sekkei Precut ፋብሪካ ዘይተራእየ ዋጋ ዘምጽእ ኣዚዩ ዝተሞገሰ፣ ዝንባሌ ዘቐምጥን ሓውሲ ዝመስልን ፈጠራ ክኾን ይጽበ። እዚ ዝዓወተ ዲዛይን ናይ ወርቂ ሽልማት A' Design Award ደረት ጥበብ፣ ሳይንስ፣ ዲዛይንን ቴክኖሎጂን ብብዙሕ ጥቕሚ ዘስፍሕ ዘደንቕ ዝኽበር ፕሮጀክት እዩ። Aida Sekkei Precut ፋብሪካ ሓያል ድሌት ዘሕድር፣ ተሃዋሕዋሕ ዘበራብር፣ ፈጠራ ዘተባብዕን ንዓና ዘማርኽን እዩ።
ድሕሪ እቲ ዲዛይን
ናይ ፕረስ ኪት
ክረዲትታት፣ ኣባላት ጋንታን ቴክኒካዊ ዝርዝራትን ብዲዛይነር ዝቐረቡ።
- ፍሉያት ባህርያት
- This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
- ዓቐንን ማዕሸግን
- Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2
Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden
Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2 - መለለዪታት
- architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
- ናይ ምፍራይ ቴክኖሎጂ
- As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
- ናይ ዲዛይን ብድሆ
- When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
- ምርምር
- Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
- ምንጪ ሓሳብ
- Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
- ናይ ፕሮጀክት ግዜ
- This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
- ናይ ስርሒት ፍሰት
- This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
- ፓተንታት
- None
- ናይ ስእሊ ክረዲት
- Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020
ስፖንሰር ዝተገብረ
ልዕሊ Designers.org ዳህሰስ
ካብ ናይ ማስታወቂያ መሻርኽትና ፍርያት፣ ኣገልግሎታትን ዕድላትን ፍለጥ።
ተወሳኺ ንምርካብ
ተዛመድቲ ዲዛይናት
ካብ ተመሳሳሊ ምድብ ብብቕዓት ዝተመረጹ ተወሳኺ ሽልማት ዝተዓወቱ ዲዛይናት ድለዩ።
